A.Zigotegos.CV
NDT.org Member Since: 2016
Added: 5/30/2016
Last Updated: 5/30/2016
Last Updated: 5/30/2016
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
MA Massachusetts
Country:
United States
Status:
I prefer permanent jobs.
Education
•Bachelor of Science degree in Mechanical Engineering Technology (1989) - Wentworth Institute of Technology, Boston, Massachusetts.
•Associate in Applied Science degree in Aeronautical Technology (1981) - Wentworth Institute of Technology, Boston, Massachusetts.
•Associate in Applied Science degree in Aeronautical Technology (1981) - Wentworth Institute of Technology, Boston, Massachusetts.
Experience
OIL & GAS INDUSTRY
QA/QC Inspector for OneSubsea Ltd. / IVS Ltd, UK.
Mellitah Oil & Gas B.V. – Bahr Essalam Phase II Project
JOTNE MEKANISKE VERKSTEDER SA – TISTEDAL, NORWAY Mar.-Apr., 2016
•Witness FIT test of Porch (x7) and Termination assemblies (x8). Porch assemblies with InBoard Hubs, OutBoard Reaction Plates with Clamp Connectors, and Seal magazine installed onto UTH HUB assembly. [PORCH HCS-U 12"-14xHC40, PORCH HCS-U 12"-10xHC40, CC 12" HPT GHO 12"-14HC40, UTH HCS-U 12"-14HC40+5EL2]
•Witness Hydraulic Pressure testing of Coupler bodies (x72) with welded pigtails and installed into Test Porch InBoard Hub.
•Issue Daily Flash reports as well as a Weekly summary and Punch List as needed.
QA/QC Inspector for Total/Recart Ltd/TPS Inspections, UK.
TOTAL – Kaombo Project
At AKER SOLUTIONS – TRANBY, NORWAY Nov., 2015
•Witness Tubing Hanger assembly AIV Seal Verification test (Hydrostatic Pressure).
•Issue report summary after visit.
MARWIN MEKANISKE AS / AKER SOLUTIONS – SANNIDAL, NORWAY Aug./Sep., 2015
•Witness FAT and Final Inspection of PGB (permanent guide base) Assemblies (Production and Water Injection).
•Perform MRB review and issue release notes for assemblies.
•Issue report summary after each visit, as well as a Punch List as needed.
Field Engineer May 2012 to Feb. 2015
AKER SOLUTIONS – FORNEBU (Moss), NORWAY
Projects: GirRI, Ichthys, Draugen, FRAM H, Greater Western Flank, Svalin C, Liwan.
•Project representative at umbilical manufacturing site in Moss to liaise with Client site Inspectors and Representatives on the day-to-day production and testing activities.
•Coordinate all planned and schedule inspection activities with production, testing, and quality departments.
•Issue Notifications for Inspection (NOIs) to Clients according to approved ITP, the Contract, or as otherwise agreed, for all umbilical manufacturing and testing activities.
•Facilitate the weekly activity progress meetings with Client site representatives and issue progress reports.
•Identify areas of concern and report problems related to quality as they arise.
•Perform incoming inspection, and documentation review for received company provided items (CPI) as well as issue timely report (punch list as needed).
•Perform Mechanical Completions of umbilicals and participate during loadout as needed.
•Maintain and verify ITP activity verification record for signatures by onsite representatives – witness/hold.
•Facilitate NCR issues and activities as needed for proper description and documentation to QA/QC group.
•Participate in the weekly internal project progress and the monthly client meetings as needed, as well as pre-production meetings.
QA/QC Engineer (Inspections/On-Site Surveillance/Audits) 1999 – 2012
TECMOR INTERNATIONAL LLC – HOUSTON, TEXAS and ATHENS, GREECE
LOES AND ASSOCIATES - HOUSTON, TEXAS
•Quality Control and Surveillance inspection on behalf of Energy Clients for umbilicals, tubulars, line pipe, subsea cable, structural steel and engineered equipment. Review and monitor Quality Plans, Inspection and Test Plans, Work Instructions, and Welding Procedure Qualifications, as well as Quality System Auditing.
•Implementation of ISO9001:2000 Quality Management Systems in a variety of industries (aggregate and cement products manufacturer, steel pressure vessels manufacturer, food product processing-milk/cheese/yogurt/almonds), from inception to independent body certification (Lloyd’s, TUV, ELOT).
•Provide training and guidance to other inspectors in the organization to ensure smooth interface with customers.
•Provide accurate and timely reporting as agreed with clients.
•Participate in company annual Business Conduct and Safety training as well as annual Drug Screening.
Examples of work:(summary list of all my project involvement in the past 10 years can be provided upon request).
a.Client onsite QC surveillance representative during umbilical manufacturing and testing activities at Aker solutions, Moss, and Nexans, in Halden, Norway for various projects.
b.Resident inspector for Super Duplex SS Tubing and associated structures for umbilicals at SANDVIK and at AKER Solutions.
c.Inspection of subsea quad cables for umbilical production at NSW and Nexans (Bodo, Norway).
d.Inspection of Hydraulic Flying Lead and Hose manufacture for the ERHA and BLOCK 15 projects at JDR and at NLI.
e.Inspection of 8” and 12” seamless pipe (duplex SS) at IBF.
f.Inspection of API 5L Subsea Steel X65 Catenary Riser (SCR) and Flow Line Pipe, 12”, 8” & 6” as well as inspection of Seamless Line Pipe Manufacture per API 5L PSL 2 X65 – (Sizes 273.1x20.6mm, 168.3x15.9mm), Production Line, Water Injection, and Test Line pipe at Tenaris Dalmine, Italy, and Vallourec Mannesmann, Brazil.
g.J-LAY COLLARS (1270pcs) and Test Ring Manufacture inspection, Installation Rings, Bulkheads, Buckle Arrestors, CHOC manufacture per ASTM A694 F65, as well as Subsea Ball Valves for Buoyancy Tanks Manufacture, ASTM A105N / A182 F51 at GALPERTI.
h.Inspection of Upfacing and Downfacing subsea structures, Hub/Pup Pieces, and VCCS Clamp Connectors at AMEK and REMET.
i.Inspection of Welhead Valve Bonnets, testing, cladding, coating and MRB review at CAMERON.
QA/QC Inspector for OneSubsea Ltd. / IVS Ltd, UK.
Mellitah Oil & Gas B.V. – Bahr Essalam Phase II Project
JOTNE MEKANISKE VERKSTEDER SA – TISTEDAL, NORWAY Mar.-Apr., 2016
•Witness FIT test of Porch (x7) and Termination assemblies (x8). Porch assemblies with InBoard Hubs, OutBoard Reaction Plates with Clamp Connectors, and Seal magazine installed onto UTH HUB assembly. [PORCH HCS-U 12"-14xHC40, PORCH HCS-U 12"-10xHC40, CC 12" HPT GHO 12"-14HC40, UTH HCS-U 12"-14HC40+5EL2]
•Witness Hydraulic Pressure testing of Coupler bodies (x72) with welded pigtails and installed into Test Porch InBoard Hub.
•Issue Daily Flash reports as well as a Weekly summary and Punch List as needed.
QA/QC Inspector for Total/Recart Ltd/TPS Inspections, UK.
TOTAL – Kaombo Project
At AKER SOLUTIONS – TRANBY, NORWAY Nov., 2015
•Witness Tubing Hanger assembly AIV Seal Verification test (Hydrostatic Pressure).
•Issue report summary after visit.
MARWIN MEKANISKE AS / AKER SOLUTIONS – SANNIDAL, NORWAY Aug./Sep., 2015
•Witness FAT and Final Inspection of PGB (permanent guide base) Assemblies (Production and Water Injection).
•Perform MRB review and issue release notes for assemblies.
•Issue report summary after each visit, as well as a Punch List as needed.
Field Engineer May 2012 to Feb. 2015
AKER SOLUTIONS – FORNEBU (Moss), NORWAY
Projects: GirRI, Ichthys, Draugen, FRAM H, Greater Western Flank, Svalin C, Liwan.
•Project representative at umbilical manufacturing site in Moss to liaise with Client site Inspectors and Representatives on the day-to-day production and testing activities.
•Coordinate all planned and schedule inspection activities with production, testing, and quality departments.
•Issue Notifications for Inspection (NOIs) to Clients according to approved ITP, the Contract, or as otherwise agreed, for all umbilical manufacturing and testing activities.
•Facilitate the weekly activity progress meetings with Client site representatives and issue progress reports.
•Identify areas of concern and report problems related to quality as they arise.
•Perform incoming inspection, and documentation review for received company provided items (CPI) as well as issue timely report (punch list as needed).
•Perform Mechanical Completions of umbilicals and participate during loadout as needed.
•Maintain and verify ITP activity verification record for signatures by onsite representatives – witness/hold.
•Facilitate NCR issues and activities as needed for proper description and documentation to QA/QC group.
•Participate in the weekly internal project progress and the monthly client meetings as needed, as well as pre-production meetings.
QA/QC Engineer (Inspections/On-Site Surveillance/Audits) 1999 – 2012
TECMOR INTERNATIONAL LLC – HOUSTON, TEXAS and ATHENS, GREECE
LOES AND ASSOCIATES - HOUSTON, TEXAS
•Quality Control and Surveillance inspection on behalf of Energy Clients for umbilicals, tubulars, line pipe, subsea cable, structural steel and engineered equipment. Review and monitor Quality Plans, Inspection and Test Plans, Work Instructions, and Welding Procedure Qualifications, as well as Quality System Auditing.
•Implementation of ISO9001:2000 Quality Management Systems in a variety of industries (aggregate and cement products manufacturer, steel pressure vessels manufacturer, food product processing-milk/cheese/yogurt/almonds), from inception to independent body certification (Lloyd’s, TUV, ELOT).
•Provide training and guidance to other inspectors in the organization to ensure smooth interface with customers.
•Provide accurate and timely reporting as agreed with clients.
•Participate in company annual Business Conduct and Safety training as well as annual Drug Screening.
Examples of work:(summary list of all my project involvement in the past 10 years can be provided upon request).
a.Client onsite QC surveillance representative during umbilical manufacturing and testing activities at Aker solutions, Moss, and Nexans, in Halden, Norway for various projects.
b.Resident inspector for Super Duplex SS Tubing and associated structures for umbilicals at SANDVIK and at AKER Solutions.
c.Inspection of subsea quad cables for umbilical production at NSW and Nexans (Bodo, Norway).
d.Inspection of Hydraulic Flying Lead and Hose manufacture for the ERHA and BLOCK 15 projects at JDR and at NLI.
e.Inspection of 8” and 12” seamless pipe (duplex SS) at IBF.
f.Inspection of API 5L Subsea Steel X65 Catenary Riser (SCR) and Flow Line Pipe, 12”, 8” & 6” as well as inspection of Seamless Line Pipe Manufacture per API 5L PSL 2 X65 – (Sizes 273.1x20.6mm, 168.3x15.9mm), Production Line, Water Injection, and Test Line pipe at Tenaris Dalmine, Italy, and Vallourec Mannesmann, Brazil.
g.J-LAY COLLARS (1270pcs) and Test Ring Manufacture inspection, Installation Rings, Bulkheads, Buckle Arrestors, CHOC manufacture per ASTM A694 F65, as well as Subsea Ball Valves for Buoyancy Tanks Manufacture, ASTM A105N / A182 F51 at GALPERTI.
h.Inspection of Upfacing and Downfacing subsea structures, Hub/Pup Pieces, and VCCS Clamp Connectors at AMEK and REMET.
i.Inspection of Welhead Valve Bonnets, testing, cladding, coating and MRB review at CAMERON.
Comments
I am an individual with broad experience within QA/QC Inspection & Surveillance and Client Site representation, for subsea structures, seamless steel line pipe, and umbilicals in the Oil & Gas industry. Additional experience in Auditing, MRB documentation reviews, Mechanical Completion and Incoming equipment inspections, and Client representation during pre-production meetings in various projects.
My strengths include flexibility, positive attitude, proactive and can-do attitude, client oriented, an eye for details with analytical and problem solving skills, motivated by challenges, a team player, very good organizational skills, and a willingness to learn and improve.
My strengths include flexibility, positive attitude, proactive and can-do attitude, client oriented, an eye for details with analytical and problem solving skills, motivated by challenges, a team player, very good organizational skills, and a willingness to learn and improve.
