CWI,ICC,NACE,ASNT Level 3 Inspector Overseas Experience
NDT.org Member Since: 2017
Added: 3/23/2017
Last Updated: 1/15/2018
Last Updated: 1/15/2018
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
ID Idaho
Country:
United States
Status:
I am willing to Travel.
I am on a job and will finish soon.
I am willing to work overseas.
I prefer permanent jobs.
I am on a job and will finish soon.
I am willing to work overseas.
I prefer permanent jobs.
Certifications
-ASNT Level 3 Ultrasonic Shear Wave, Straight Beam, and PAUT Testing
-Certified as Level 2 Penetrant Testing
-Certified as Level 1 X-ray Testing
-Certified as Level 2 Magnetic Particle Testing
-American Welding Society Certified Welding Inspector (CWI) Since September 2008
-International Code Council Structural Inspector and Bolting (S1&S2)
-American Society of Non-destructive Testing ACCP-VT Level 2
-NACE Level 1 Coating Inspector
-10 Hour OSHA Certification
-Certified as Level 2 Penetrant Testing
-Certified as Level 1 X-ray Testing
-Certified as Level 2 Magnetic Particle Testing
-American Welding Society Certified Welding Inspector (CWI) Since September 2008
-International Code Council Structural Inspector and Bolting (S1&S2)
-American Society of Non-destructive Testing ACCP-VT Level 2
-NACE Level 1 Coating Inspector
-10 Hour OSHA Certification
Education
-Seattle Institute of Technology NDT
-40 Hour NACE CIP level 1 Coating Inspector
-40hour ASNT NDT MT Level II
-40 hours ASNT NDT UT Level II
-40 Hour Radiographic Film Interpreter
-AWS CWI Seminar D1.1 Sept 2008
-University of Ultrasonics / Mark Davis 80 Hour PAUT
-Occupational Health and Safety Administration 10 Hour General Industry Class
-40 Hour NDT level III Basic Hellier
-40 Hour NDT UT level III refresher Hellier
-40 Hour NACE CIP level 1 Coating Inspector
-FirstAid
-40 Hour NACE CIP level 1 Coating Inspector
-40hour ASNT NDT MT Level II
-40 hours ASNT NDT UT Level II
-40 Hour Radiographic Film Interpreter
-AWS CWI Seminar D1.1 Sept 2008
-University of Ultrasonics / Mark Davis 80 Hour PAUT
-Occupational Health and Safety Administration 10 Hour General Industry Class
-40 Hour NDT level III Basic Hellier
-40 Hour NDT UT level III refresher Hellier
-40 Hour NACE CIP level 1 Coating Inspector
-FirstAid
Experience
HRV Conformance Verification Associates, Inc Philadelphia, Pa
Quality Assurance Inspector
Work location Qinhuangdao, PRC
July 2014 - Present
- UT shear wave 63 hrs logged
- UT PAUT 325 hrs logged
- MT 50 hrs
- VT performed visual inspections on various stages of bridge fabrication.
- Responsible for verification of weld inspection and dimensional inspection
- Reviewing PAUT encoded data.
- Writing nonconformance reports on dimensional, bolting, and welding related problems. - Responsible for verification of bolt torqueing
Oregon Iron Works Clackamas, Or
Quality Control Inspector
Aug 2013 – July 2014
- UT shear wave 800 hrs logged - PT 262 hrs logged
- MT yoke 500 hrs logged
-Radiographic Interpretation 350 hours logged
- Responsible for weld inspection and dimensional inspection
- Machining inspection to tolerances within +/- 0.0005 of an inch
- Writing nonconformance reports on dimensional and welding related errors. - Creating dispositions for repairs that are needed.
Avcon, Inc Orlando, FL
Quality Assurance Inspector
July 2012 – Aug 2013
- UT shear wave 1000 hrs logged
- UT Straight beam 100 hrs logged
- MT yoke 900 hours logged
- Writing detailed reports on inspections
- Lead inspector overseeing work done on jobs and other inspectors
- Responsible for creating weld maps, weld procedures and the certification of welders on projects - Structural bolting and decking inspections
Space Science Services, Inc Orlando, FL
Quality Control / Quality Assurance Inspector
Oct 2008 - July 2012
- UT shear wave 2000 hrs logged
- UT Straight beam 200 hrs logged
- MT Prods, yoke, and Bench unit 1500 hours logged
- PT 1000 hrs logged
- RT 300 hrs logged
- Writing detailed reports on inspections
- Lead inspector overseeing work done on jobs and other inspectors
- Responsible for creating weld maps, weld procedures and the certification of welders on projects - Structural Bolting and decking inspections
Schwing America, Inc White Bear Lake, MN
Quality Control Inspector
Sept 05 - Oct 08
- UT shear wave 1500 hrs logged
- UT Straight beam 500 hrs logged
- MT 500 hrs
- Geometric dimensioning and tolerance
- Performing Brinell and Vickers hardness
- Responsible for weld inspection and dimensional inspection
- Machining inspection to tolerances within +/- 0.0005 of an inch
- Writing nonconformance reports on dimensional and welding related problems - Creating dispositions for repairs that are needed.
Quality Assurance Inspector
Work location Qinhuangdao, PRC
July 2014 - Present
- UT shear wave 63 hrs logged
- UT PAUT 325 hrs logged
- MT 50 hrs
- VT performed visual inspections on various stages of bridge fabrication.
- Responsible for verification of weld inspection and dimensional inspection
- Reviewing PAUT encoded data.
- Writing nonconformance reports on dimensional, bolting, and welding related problems. - Responsible for verification of bolt torqueing
Oregon Iron Works Clackamas, Or
Quality Control Inspector
Aug 2013 – July 2014
- UT shear wave 800 hrs logged - PT 262 hrs logged
- MT yoke 500 hrs logged
-Radiographic Interpretation 350 hours logged
- Responsible for weld inspection and dimensional inspection
- Machining inspection to tolerances within +/- 0.0005 of an inch
- Writing nonconformance reports on dimensional and welding related errors. - Creating dispositions for repairs that are needed.
Avcon, Inc Orlando, FL
Quality Assurance Inspector
July 2012 – Aug 2013
- UT shear wave 1000 hrs logged
- UT Straight beam 100 hrs logged
- MT yoke 900 hours logged
- Writing detailed reports on inspections
- Lead inspector overseeing work done on jobs and other inspectors
- Responsible for creating weld maps, weld procedures and the certification of welders on projects - Structural bolting and decking inspections
Space Science Services, Inc Orlando, FL
Quality Control / Quality Assurance Inspector
Oct 2008 - July 2012
- UT shear wave 2000 hrs logged
- UT Straight beam 200 hrs logged
- MT Prods, yoke, and Bench unit 1500 hours logged
- PT 1000 hrs logged
- RT 300 hrs logged
- Writing detailed reports on inspections
- Lead inspector overseeing work done on jobs and other inspectors
- Responsible for creating weld maps, weld procedures and the certification of welders on projects - Structural Bolting and decking inspections
Schwing America, Inc White Bear Lake, MN
Quality Control Inspector
Sept 05 - Oct 08
- UT shear wave 1500 hrs logged
- UT Straight beam 500 hrs logged
- MT 500 hrs
- Geometric dimensioning and tolerance
- Performing Brinell and Vickers hardness
- Responsible for weld inspection and dimensional inspection
- Machining inspection to tolerances within +/- 0.0005 of an inch
- Writing nonconformance reports on dimensional and welding related problems - Creating dispositions for repairs that are needed.
Comments
Contact info
Anthony Anderson
andersonae78@gmail.com
C: 208-920-0374
Anthony Anderson
andersonae78@gmail.com
C: 208-920-0374
