API 570, 510, 653 / CWI
NDT.org Member Since: 2019
Added: 8/2/2019
Last Updated: 8/2/2019
Last Updated: 8/2/2019
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
MS Mississippi
Country:
United States
Status:
I am willing to Travel.
I am on a job and will finish soon.
I am on a job and will finish soon.
Certifications
API 570 Piping Inspector Certification (49444)
API 510 Pressure Vessel Inspector Certification (54720)
API 653 Above Ground Storage Tank Inspector Certification (72272)
Certified Welding Inspector, American Welding Society (08060991)
API 510 Pressure Vessel Inspector Certification (54720)
API 653 Above Ground Storage Tank Inspector Certification (72272)
Certified Welding Inspector, American Welding Society (08060991)
Experience
INSPECTOR
American Inspection Services November 2015-Present
Grand Bay, AL
Huntsman Performance products
Chevron Pascagoula Refinery
SSAB
Thyssenkrupp
Established inspection program for plants fixed equipment
Performed Internal and external inspections on piping, tanks and pressure vessels
Compiled detailed inspection reports with findings and recommendations
Calculated remaining life and corrosion rates for piping and pressure vessels
Created inspection drawing of piping systems and established CML locations
API 570/CWI Lead Inspector
Weld Spec Inspection Services January 2015 to April 2015
Huntsman Chemical
Port Neches, TX
Third party inspector lead on piping during 2015 T&I F5 PO/MTBE unit
Conducted CUI inspections on cold service piping systems, made repair recommendations, and submitted final reports after repairs were completed
Reviewed and signed off completed piping packages
Witness of hydro & pneumatic tests
Tracked and reported status of work packages to management
Supervised a team of third-party inspectors
Mechanical Integrity Inspector
Team Industrial Services 2013 to 2015
Valero
Narco, LA
Conducted inspections on piping to maintain the mechanical integrity of fixed equipment in the facility
Compiled and submitted completed inspection reports
Recommended and approved repairs and performed visual inspections of completed work
Performed calculations to determine T-min & remaining life
Worked closely with plant engineering, maintenance, and operations personnel
Quality Assurance
American Inspection Services July 2013 to September 2013
Chevron Refinery Pascagoula
Final and pre-hydro walk down of test packages
Submitted surveillance reports on contractor activities and recommended corrective action
Witness hydro & pneumatic test
Quality Control
Performance Contractors Inc.
Baton Rouge, LA
Worked in the quality department on several different projects
Kemper County Power Plant, Southern Company 2013
Chevron Pascagoula, capital projects & maintenance 2010-2013
Valero St Charles refinery shut down 2010
Exxon Mobile Bay Consolidation Project 2009
Marathon GME Project 2007-2009
Conducted in process & final inspection of piping systems
Review of test packages for welding & NDE completion
Conducted internal audits and recommended corrective actions
Issued release for hydrostatic tests, pneumatic & witness of the same
Review of approved WPS & PQR
Visual inspection of completed welds & related documentation
Coordinated all NDE & PWHT activities & review of documents
American Inspection Services November 2015-Present
Grand Bay, AL
Huntsman Performance products
Chevron Pascagoula Refinery
SSAB
Thyssenkrupp
Established inspection program for plants fixed equipment
Performed Internal and external inspections on piping, tanks and pressure vessels
Compiled detailed inspection reports with findings and recommendations
Calculated remaining life and corrosion rates for piping and pressure vessels
Created inspection drawing of piping systems and established CML locations
API 570/CWI Lead Inspector
Weld Spec Inspection Services January 2015 to April 2015
Huntsman Chemical
Port Neches, TX
Third party inspector lead on piping during 2015 T&I F5 PO/MTBE unit
Conducted CUI inspections on cold service piping systems, made repair recommendations, and submitted final reports after repairs were completed
Reviewed and signed off completed piping packages
Witness of hydro & pneumatic tests
Tracked and reported status of work packages to management
Supervised a team of third-party inspectors
Mechanical Integrity Inspector
Team Industrial Services 2013 to 2015
Valero
Narco, LA
Conducted inspections on piping to maintain the mechanical integrity of fixed equipment in the facility
Compiled and submitted completed inspection reports
Recommended and approved repairs and performed visual inspections of completed work
Performed calculations to determine T-min & remaining life
Worked closely with plant engineering, maintenance, and operations personnel
Quality Assurance
American Inspection Services July 2013 to September 2013
Chevron Refinery Pascagoula
Final and pre-hydro walk down of test packages
Submitted surveillance reports on contractor activities and recommended corrective action
Witness hydro & pneumatic test
Quality Control
Performance Contractors Inc.
Baton Rouge, LA
Worked in the quality department on several different projects
Kemper County Power Plant, Southern Company 2013
Chevron Pascagoula, capital projects & maintenance 2010-2013
Valero St Charles refinery shut down 2010
Exxon Mobile Bay Consolidation Project 2009
Marathon GME Project 2007-2009
Conducted in process & final inspection of piping systems
Review of test packages for welding & NDE completion
Conducted internal audits and recommended corrective actions
Issued release for hydrostatic tests, pneumatic & witness of the same
Review of approved WPS & PQR
Visual inspection of completed welds & related documentation
Coordinated all NDE & PWHT activities & review of documents
