CWI Inspector
NDT.org Member Since: 2020
Added: 4/12/2020
Last Updated: 4/12/2020
Last Updated: 4/12/2020
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
GA Georgia
Country:
United States
Status:
I am willing to Travel.
I need a job as soon as possible.
I need a job as soon as possible.
Certifications
•American Welding Society CWI #07030701 exp. 3/1/22
•OSHA 10/30
•Certificate of Pipeline Welding Inspection # 63765451
•Operate Scissor Lifts, Boom Lifts, 1- and 2-Man Picks, Man Basket
•Transportation Worker Identification Card
•OSHA 10/30
•Certificate of Pipeline Welding Inspection # 63765451
•Operate Scissor Lifts, Boom Lifts, 1- and 2-Man Picks, Man Basket
•Transportation Worker Identification Card
Education
•Associate Degree, Welding & Joining Technology Heart of Ga. Tech. College Dublin, GA
•Core/ Business Brewton Parker College, Mt. Vernon, GA.
•Core/ Business Brewton Parker College, Mt. Vernon, GA.
Experience
Employers:
Babcock & Wilcox Construction Co. Akron, OH. 2/09 -07/19
Enerfab Construction co. Cincinnati OH 1/08 – 11-/08
Spartan Construction
Rome, GA. 6/07 - 12/07
Boilermaker Lu 454 Chattanooga, TN. 7/2000 – Present
Experience:
•Conducted welder orientation for new welders hiring in.
•Administered welder qualification to ASME Section IX / D1.1 from instruction proctoring fit-up, root pass and final inspection a well as oversaw of preparation and inspection of bend test specimens.
•Prepared and maintained Welder Qualification Records and continuity.
•Issued and maintained records welder stencils.
•Performed Fit-up, root pass and final visual inspection piping and structural steel.
•Documented and Preformed Foreign Material Exclusion (FME) inspections on tube, piping and ducting.
•Performed structural bolt inspection for ASTM A-325 and ASTM A-490 bolts.
•Bolt tension verification using a Skidmore Wilhelm bolt tension calibrator.
•Using MTR’s verified metallurgy and filler metal requirements to ensure the correct filler metal was ordered, identified, stored, issued and used appropriately.
•Inspected equipment installations for level and alignment, piping and piping supports.
•Prior to weld out inspected for plum, level, and square on large sections of duct work 100'x100', Tanks 100' Día and multi-story structural steel.
•Development of procedure qualification records (PQR) and welding procedure specifications (WPS).
•Performed required quality inspection for Fiberglass Reinforced Plastics (FRP) piping in accordance with ASME B31.3
•Insured the calibration of measurement and test equipment was performed at specified intervals.
•Established the minimum requirements for preheat and post weld heat treatment of welds for compliance with applicable code requirement. Scheduled and monitored pre-heat, post weld heat treatment and all third-party NDT.
•Inspected tank floors per API 650 using a vacuum box
•Documented the project site storage and maintenance of equipment in accordance with manufactures requirements during the projects.
•Prepared and maintained punch list for items, areas or systems to ensure that all work has been completed and found to acceptable prior to turn over to Client.
•Responsible for all quality control documentation including mapping logging and tracking of completed welds and inspections preformed, completion of code reports and forms and turn over documentation.
•Interfaced with client’s inspectors and company’s Underwriters Authorized Inspector
Babcock & Wilcox Construction Co. Akron, OH. 2/09 -07/19
Enerfab Construction co. Cincinnati OH 1/08 – 11-/08
Spartan Construction
Rome, GA. 6/07 - 12/07
Boilermaker Lu 454 Chattanooga, TN. 7/2000 – Present
Experience:
•Conducted welder orientation for new welders hiring in.
•Administered welder qualification to ASME Section IX / D1.1 from instruction proctoring fit-up, root pass and final inspection a well as oversaw of preparation and inspection of bend test specimens.
•Prepared and maintained Welder Qualification Records and continuity.
•Issued and maintained records welder stencils.
•Performed Fit-up, root pass and final visual inspection piping and structural steel.
•Documented and Preformed Foreign Material Exclusion (FME) inspections on tube, piping and ducting.
•Performed structural bolt inspection for ASTM A-325 and ASTM A-490 bolts.
•Bolt tension verification using a Skidmore Wilhelm bolt tension calibrator.
•Using MTR’s verified metallurgy and filler metal requirements to ensure the correct filler metal was ordered, identified, stored, issued and used appropriately.
•Inspected equipment installations for level and alignment, piping and piping supports.
•Prior to weld out inspected for plum, level, and square on large sections of duct work 100'x100', Tanks 100' Día and multi-story structural steel.
•Development of procedure qualification records (PQR) and welding procedure specifications (WPS).
•Performed required quality inspection for Fiberglass Reinforced Plastics (FRP) piping in accordance with ASME B31.3
•Insured the calibration of measurement and test equipment was performed at specified intervals.
•Established the minimum requirements for preheat and post weld heat treatment of welds for compliance with applicable code requirement. Scheduled and monitored pre-heat, post weld heat treatment and all third-party NDT.
•Inspected tank floors per API 650 using a vacuum box
•Documented the project site storage and maintenance of equipment in accordance with manufactures requirements during the projects.
•Prepared and maintained punch list for items, areas or systems to ensure that all work has been completed and found to acceptable prior to turn over to Client.
•Responsible for all quality control documentation including mapping logging and tracking of completed welds and inspections preformed, completion of code reports and forms and turn over documentation.
•Interfaced with client’s inspectors and company’s Underwriters Authorized Inspector
Comments
Experienced, goal oriented, dedicated and disciplined team player. I have over 20 years of experience in the construction, repair and maintenance of power plants, paper mills and refineries. In the last 13 years, I have worked in the quality control departments of 3 construction companies in positions of increasing levels of responsibilities from Field QC to Site Quality Control Supervisor. Seeking employment opportunity to further my growth in Quality Management.
