htrman
NDT.org Member Since: 2003
Added: 12/9/2003
Last Updated: 12/9/2003
Last Updated: 12/9/2003
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
AB Alberta
Country:
Canada
Status:
I am willing to Travel.
I am on a job and will finish soon.
Currently working but always looking.
I am willing to work overseas.
I am on a job and will finish soon.
Currently working but always looking.
I am willing to work overseas.
Certifications
TECHNICAL QUALIFICATIONS
· Project and Critical Path Management.
· Procurement, Expediting and Cost Analysis.
· DNV Loss Control Management.
· Microsoft Office, Project & Visio. SAP training, Visions training.
· Welding Engineering Technology ongoing.
· CSA/CWB: Level III, ASME I, II, V, VIII & IX, B31.1 & B31.3. CSA W59/ 47.1, Z662.
· API-510, 570 and 653. Writing
· AWS, CWI, Certified.
· MPI, Level II ASNT.
· LPI, Level II ASNT.
· Ultrasonic, Level I ASNT, Level II Course.
· Radiography, Level II ASNT.
· AECB: Qualified Operator.
· Radiography: Film Interpretation.
· Inspection Procedures: Visual and Non-destructive and Film Auditing.
· First Class and “B” Pressure Welding.
· Safety Supervisor, First Aid Emergency Response, H2S, WHMIS, TDG, CS and Ground Disturbance. Class 1 Driver’s License, air brake and heavy equipment operator.
· Project and Critical Path Management.
· Procurement, Expediting and Cost Analysis.
· DNV Loss Control Management.
· Microsoft Office, Project & Visio. SAP training, Visions training.
· Welding Engineering Technology ongoing.
· CSA/CWB: Level III, ASME I, II, V, VIII & IX, B31.1 & B31.3. CSA W59/ 47.1, Z662.
· API-510, 570 and 653. Writing
· AWS, CWI, Certified.
· MPI, Level II ASNT.
· LPI, Level II ASNT.
· Ultrasonic, Level I ASNT, Level II Course.
· Radiography, Level II ASNT.
· AECB: Qualified Operator.
· Radiography: Film Interpretation.
· Inspection Procedures: Visual and Non-destructive and Film Auditing.
· First Class and “B” Pressure Welding.
· Safety Supervisor, First Aid Emergency Response, H2S, WHMIS, TDG, CS and Ground Disturbance. Class 1 Driver’s License, air brake and heavy equipment operator.
Education
TECHNICAL TRAINING
· Project and Critical Path Management.
· Procurement, Expediting and Cost Analysis.
· DNV Loss Control Management.
· Microsoft Office, Project & Visio. SAP training, Visions training.
· Welding Engineering Technology ongoing.
First Class and “B” Pressure Welding.
· Safety Supervisor, First Aid Emergency Response, H2S, WHMIS, TDG, CS and Ground Disturbance. Class 1 Driver’s License, air brake and heavy equipment operator.
· Project and Critical Path Management.
· Procurement, Expediting and Cost Analysis.
· DNV Loss Control Management.
· Microsoft Office, Project & Visio. SAP training, Visions training.
· Welding Engineering Technology ongoing.
First Class and “B” Pressure Welding.
· Safety Supervisor, First Aid Emergency Response, H2S, WHMIS, TDG, CS and Ground Disturbance. Class 1 Driver’s License, air brake and heavy equipment operator.
Experience
CURRENTLY
Quality Assurance Manager 2003
Foster Wheeler Fired Heaters Ltd. Calgary, Alberta Canada.
Senior Inspector 2002
TransAlta Energy Corporation, Suncor Site Fort MacMurray, AB
· Oversee maintenance and inspection personnel, on site.
· Delegate inspection responsibility on site .
· Audit inspection activities and NDE.
· Insure craft supervision documentation compliance.
· Insure documentation turnover from contractors.
· Owner / User program Inspection , testing, planning, scheduling and costing,
· Budget Analysis, costing, planning and scheduling.
Senior / Intermediate Inspector 2002
NOVA CHEMICALS, Joffre E1 OLEFINS
· Oversee maintenance and inspection personnel, on site.
· Delegate inspection responsibility on site .
· Audit inspection activities and NDE.
· Insure craft supervision documentation compliance.
· Insure documentation turnover from contractors.
· Owner / User program Inspection , testing, planning, scheduling and costing,
Senior Construction Supervisor 2001
Canadian Hunter Exploration Ltd. .AB, BC
· Oversee compressor, facility and pipeline projects construction.
· Insure contract compliance and costing.
· Budget Analysis, costing, planning and scheduling.
· Scope changes and field trouble reporting.
· Material take off and expediting.
· Delegate inspection personnel on site.
· Audit inspection activities and radiography.
· Insure craft supervision documentation and quality control compliance and testing
· Excavation: survey verification, access roads, clearing, ditch line, crossings and cleanup.
Senior Supervising Inspector 2000
SUNCOR/ MCC Fort MacMurray, AB
· Oversee project supervision and inspection personnel, 7 sites and 400+ trade’s personnel.
Senior Welding Inspector 2000
ALLIANCE PIPELINE LIMITED
250 Km of laterals, 4” through 16”
Senior Supervising Inspector 1999
NOVA CHEMICALS, Joffre OSBL, E3, Sclair
For: PCL Industrial
Chief Welding Inspector 1999
INUVIALUIT PETROLEUM CORPORATION, Inuvik, NWT
For: Michon & Associates/All-West X-Ray Ltd. (55 km – 6” and facilities)
Field Superintendent 1998
UREA GRANULATION PLANT, AGRIUM CANADA LTD.
QA Personnel Supervisor 1998
ICI CANADA LTD./ICF/KAISER CANADA LTD.-NITRIC ACID PLANT (NAP II)
For: Comstock Canada Ltd
Quality Surveillance Representative 1997
· Pan Canadian Petroleum Ltd. / DPH Engineering Inc. / Colt Engineering Ltd.
· Fluor Daniel Canada
· Waha / Al-Jawaby Oil Service Co. Ltd.
· Union Gas Ltd.
Senior Supervising QA Inspector 1994 - 2001
SYNCRUDE CANADA, Extraction / Mining
· UT survey and field inspection.
· Review welding procedures and working procedures.
· Review repair and alteration of piping, vessels and tanks.
· Weld mapping and as-builts.
· Supervision of trade personnel.
Supervisor/Field Inspector 1995-1997
CANSPEC MATERIALS ENGINEERING AND TESTING/CANSPEC GROUP INC.
· Pipe Mill – Performed third party inspection/auditing for Shell Canada Ltd., Chevron Canada Resources, Pan Canadian Petroleum, Western Canadian Natural Gas, Northwestern Utilities, Suncor, and Syncrude. 15000 + KM
· Carried out third party customer inspection of numerous structural steel projects for the City of Calgary, Government of Alberta, and Government of Canada.
· Petrochemical – Completed visual and non-destructive testing during plant shutdowns for Shell Caroline, Husky (Upgrader), Union Carbide, Novacor Chemicals, Methanex, Tolko Ind. Ltd., Chevron Canada Resources, Suncor, and Syncrude.
· Pulp Mill – Performed visual inspection and NDT of numerous plant shutdowns for Weyerhaeuser, Weldwood, and Fletcher Challenge.
Field Fabrication and Erection 1994 – prior
· Welding supervision of numerous structural steel and process piping projects for F.L. Metals in Montreal, Toronto and Calgary, Monad Contractors of Vancouver at the Fort St. John/Taylor Plant for WestCoast Energy.
· Shutdown experience in major processing facilities for Shell Canada Ltd. (Jumping Pond and Shell Caroline), Methanex (Kitimat and Medicine Hat), Tolko Ind. (High Prairie), Weldwood (Hinton), and WestCoast Energy (Fort St. John).
· Structural erection for numerous structural steel projects including: Dilcon Construction Ltd. (Shell Caroline), Ellis Don (Skydome in Toronto, Saddledome in Calgary, and Bankers Hall in Calgary),
· Tolko Ind. Ltd. (oriented strand board plant, High Prairie), Lafarge Canada Ltd. (Exshaw), Alberta Power (co-gen, Sheerness).
· Employed as a tie-in/Pipeline Welder for Triton Canada Ltd. (Nova Compressor Stations at Fox Creek, Valleyview and Turner Valley). Employed as a B-Pressure.
Quality Assurance Manager 2003
Foster Wheeler Fired Heaters Ltd. Calgary, Alberta Canada.
Senior Inspector 2002
TransAlta Energy Corporation, Suncor Site Fort MacMurray, AB
· Oversee maintenance and inspection personnel, on site.
· Delegate inspection responsibility on site .
· Audit inspection activities and NDE.
· Insure craft supervision documentation compliance.
· Insure documentation turnover from contractors.
· Owner / User program Inspection , testing, planning, scheduling and costing,
· Budget Analysis, costing, planning and scheduling.
Senior / Intermediate Inspector 2002
NOVA CHEMICALS, Joffre E1 OLEFINS
· Oversee maintenance and inspection personnel, on site.
· Delegate inspection responsibility on site .
· Audit inspection activities and NDE.
· Insure craft supervision documentation compliance.
· Insure documentation turnover from contractors.
· Owner / User program Inspection , testing, planning, scheduling and costing,
Senior Construction Supervisor 2001
Canadian Hunter Exploration Ltd. .AB, BC
· Oversee compressor, facility and pipeline projects construction.
· Insure contract compliance and costing.
· Budget Analysis, costing, planning and scheduling.
· Scope changes and field trouble reporting.
· Material take off and expediting.
· Delegate inspection personnel on site.
· Audit inspection activities and radiography.
· Insure craft supervision documentation and quality control compliance and testing
· Excavation: survey verification, access roads, clearing, ditch line, crossings and cleanup.
Senior Supervising Inspector 2000
SUNCOR/ MCC Fort MacMurray, AB
· Oversee project supervision and inspection personnel, 7 sites and 400+ trade’s personnel.
Senior Welding Inspector 2000
ALLIANCE PIPELINE LIMITED
250 Km of laterals, 4” through 16”
Senior Supervising Inspector 1999
NOVA CHEMICALS, Joffre OSBL, E3, Sclair
For: PCL Industrial
Chief Welding Inspector 1999
INUVIALUIT PETROLEUM CORPORATION, Inuvik, NWT
For: Michon & Associates/All-West X-Ray Ltd. (55 km – 6” and facilities)
Field Superintendent 1998
UREA GRANULATION PLANT, AGRIUM CANADA LTD.
QA Personnel Supervisor 1998
ICI CANADA LTD./ICF/KAISER CANADA LTD.-NITRIC ACID PLANT (NAP II)
For: Comstock Canada Ltd
Quality Surveillance Representative 1997
· Pan Canadian Petroleum Ltd. / DPH Engineering Inc. / Colt Engineering Ltd.
· Fluor Daniel Canada
· Waha / Al-Jawaby Oil Service Co. Ltd.
· Union Gas Ltd.
Senior Supervising QA Inspector 1994 - 2001
SYNCRUDE CANADA, Extraction / Mining
· UT survey and field inspection.
· Review welding procedures and working procedures.
· Review repair and alteration of piping, vessels and tanks.
· Weld mapping and as-builts.
· Supervision of trade personnel.
Supervisor/Field Inspector 1995-1997
CANSPEC MATERIALS ENGINEERING AND TESTING/CANSPEC GROUP INC.
· Pipe Mill – Performed third party inspection/auditing for Shell Canada Ltd., Chevron Canada Resources, Pan Canadian Petroleum, Western Canadian Natural Gas, Northwestern Utilities, Suncor, and Syncrude. 15000 + KM
· Carried out third party customer inspection of numerous structural steel projects for the City of Calgary, Government of Alberta, and Government of Canada.
· Petrochemical – Completed visual and non-destructive testing during plant shutdowns for Shell Caroline, Husky (Upgrader), Union Carbide, Novacor Chemicals, Methanex, Tolko Ind. Ltd., Chevron Canada Resources, Suncor, and Syncrude.
· Pulp Mill – Performed visual inspection and NDT of numerous plant shutdowns for Weyerhaeuser, Weldwood, and Fletcher Challenge.
Field Fabrication and Erection 1994 – prior
· Welding supervision of numerous structural steel and process piping projects for F.L. Metals in Montreal, Toronto and Calgary, Monad Contractors of Vancouver at the Fort St. John/Taylor Plant for WestCoast Energy.
· Shutdown experience in major processing facilities for Shell Canada Ltd. (Jumping Pond and Shell Caroline), Methanex (Kitimat and Medicine Hat), Tolko Ind. (High Prairie), Weldwood (Hinton), and WestCoast Energy (Fort St. John).
· Structural erection for numerous structural steel projects including: Dilcon Construction Ltd. (Shell Caroline), Ellis Don (Skydome in Toronto, Saddledome in Calgary, and Bankers Hall in Calgary),
· Tolko Ind. Ltd. (oriented strand board plant, High Prairie), Lafarge Canada Ltd. (Exshaw), Alberta Power (co-gen, Sheerness).
· Employed as a tie-in/Pipeline Welder for Triton Canada Ltd. (Nova Compressor Stations at Fox Creek, Valleyview and Turner Valley). Employed as a B-Pressure.
Comments
PROFESSIONAL HIGHLIGHTS
Over 17 years experience. This consists of 14 years of construction management and supervision relating to civil, structural and mechanical installations.
Involved with excavation and construction, ensuring compliance with regulatory authorities: CSA, EUB, NEB and Transport Canada. Possess a solid technical knowledge of construction practices, metallurgy, welding processes and failure analysis, including ANSI/ASME, CAN/CSA codes and API quality assurance requirements.
Effective in managing, supervising, training and evaluating personnel.
Nils is currently completing a course of study in API certification and National Board certification through ABSA.
Over 17 years experience. This consists of 14 years of construction management and supervision relating to civil, structural and mechanical installations.
Involved with excavation and construction, ensuring compliance with regulatory authorities: CSA, EUB, NEB and Transport Canada. Possess a solid technical knowledge of construction practices, metallurgy, welding processes and failure analysis, including ANSI/ASME, CAN/CSA codes and API quality assurance requirements.
Effective in managing, supervising, training and evaluating personnel.
Nils is currently completing a course of study in API certification and National Board certification through ABSA.
