Hi

I have a GE mini drive unit with a complete set of bolt hole probe & calibration standard for sale.
I also have other probes for sale, see the list below for of some of the probes & standard I have for sale.
If you have any questions, don't hesitate to contact me.

Note: All items are used and are located in Montreal, Canada.

Please, don't hesitate to make a offer for the complete lot.
Thank you.


List of item for sale:
--Mini Drive unit--
Hocking (GE) Mini Drive unit 33A100, 12 pin Lemo connector
(I have a cable for the minidrive, see cable section)


--Bolt hole probes--
These probes all appear to be Hocking (GE) brand.
All these probes fit the mini drive unit.
Diameter P/N
3/16 620 546 012
1/4 620 546 016
5/16 619P020
3/8 620 546 024
7/16 620 546 028
1/2 620 546 032
1/2 620 546 032
9/16 620 546 036
5/8 620 546 040
11/16 620 546 072 (This probe say 1-1/8 but is definetively 11/16)
3/4 620 546 048
13/16 620 546 052
7/8 620 546 056
1 620 546 064
1-1/8 620 546 044 (This probe say 11/16 but is definetively 1-1/8)


--Conductivity probe--
Hocking (GE) 47P001, 60 - 500 kHz, 12.7 mm (1/2 in) diameter, 5 pin Lemo connector
(I have a cable for this probe, see cable section)


--Spot Face Reflection probe--
Hocking (GE) 700P07A, 1 - 100 kHz, 7 mm (0.28 in) diameter, 48 mm (1.89 in) length, steel body, 4 pin Lemo connector
Hocking (GE) 700P11A, 0.3 - 100 kHz, 11 mm (0.44 in) diameter, 45 mm (1.177 in) length, Delrin body, 4 pin Lemo connector
(I have a cable for these probes, see cable section)


--Conductivity probe--
Hocking (GE) 47P001, 60 - 500 kHz, 12.7 mm (1/2 in) diameter, 5 pin Lemo connector
(I have a cable for this probe, see cable section)


--Countersunk probes--
These probes are all branded NDT Engineering Corp..
These probes does not fit the mini drive unit.
All these probes have a stainless steel body.
Diameter P/N
5/32 CSDF100-10/SS
3/16 CSDF100-12/SS
7/32 CSDF100-14/SS
1/4 CSDF100-16/SS


--Ring reflection probe--
NDT Engineering Corp., RR0110-5/TF, 50 Hz - 3 kHz, 0.500 in inside diameter, 1.000 in outside diameter, reflection, fischer triax
NDT Engineering Corp., RR0112-3/TF, reflection, fischer triax
(I have a cable for these probes, see cable section)


--Airplane wheel probe--
Krautkramer (GE), 632-670-005
Krautkramer (GE), 632-670-006
Krautkramer (GE), 632-670-017
Krautkramer (GE), 632-670-890
Krautkramer (GE), 632-670-840
(I have a cable for these probes, see cable section)


--Surface probe--
NDT Engineering Corp., MP-50, Straight, 50-500 kHz, 1/8 in diameter, 5 in length, shielded, microdot.
NDT Engineering Corp., MP-40, Straight, 50-500 kHz, 1/8 in diameter, 4 in length, shielded, microdot.
NDT Engineering Corp., MP-30, Straight, 50-500 kHz, 1/8 in diameter, 3 in length, shielded, microdot.
NDT Engineering Corp., MP-30/1-40K, Straight, 1-40 kHz, 1/8 in diameter, 3 in length, shielded, microdot.
NDT Engineering Corp., P905-50, microdot.
NDT Engineering Corp., P901-2S, microdot.
Krautkramer (GE), 610-134-000
Hocking (GE), 610-194-014
Hocking (GE), 610-154-002
Hocking (GE), 610-174-076
3 x Krautkramer (GE), 377-001-767, Flexible shaft
(I have a cable for these probes, see cable section)


--Cable--
GE, 640-010-048, 12 pin Lemo to 12 pin Lemo.
Krautkramer (GE), 074-140-025, Dual microdot to 12 pin Lemo.
Krautkramer (GE), 640-010-079, 5 pin Lemo to 12 pin Lemo.
Krautkramer (GE), 640-015-023, 6 pin Jaeger to 12 pin Lemo.
2 x NDT Engineering Corp., CRH22-TF-6, Fischer triax to 12 pin Lemo.
Microdot to BNC connector, no brand
Krautkramer (GE), 074-140-024, 4 pin Lemo to 12 pin Lemo.


--Calibration ring--
Calibration ring are all branded NDT Engineering Corp., 10XX serie.
Calibration ring have one or two EDM corner hotch in the bore.
Aluminium calibration ring (Size: 0.188, 0.250, 0.313, 0.375, 0.438, 0.500, 0.750, 0.875, 1.000, 1.125 in)
Steel 4340 calibration ring (Size: 0.188, 0.250, 0.313, 0.375, 0.438, 0.500, 1.000 in)
Titanium calibration ring (Size: 0.188, 0.250, 0.313, 0.375, 0.500, 0.625, 0.750, 0.875, 1.000, 1.062, 1.125 in)