QA/QC and PV SUPERINTENDENT
Posted: 5/4/2011 11:59:29 PM
This job is closed
NDT.org Job Number:
27565
* Please reference NDT.org Job Number on all correspondence
Contact:
Prihartono
Phone:
+62217209304
Fax:
+62217209406
Company:
DEPRIWANGGA
Contact:
Prihartono
Country:
Indonesia
Length:
2 years
Pay:
US$
Email:
e_recruit_oilgas@yahoo.com
Our Clients seeking candidates to fill the following position.
The work location will be in Indonesia. Contract Duration will be 2 years
Please email your CV complete with Certificate directly to e_recruit_oilgas@yahoo.com
JOB DESCRIPTIONS, MINIMUM QUALIFICATIONS AND EXPERIENCE REQUIREMENTS
QA/QC SUPERINTENDENT
JOB PURPOSE
Responsible for managing and ensure that the QA/QC supervisions, all inspections and other QA/QC
matters at fabrication yard, construction sites, vendor premises shall be performing in compliance by
Project Technical Specification, Total E&P Indonιsie and Project Quality objectives.
ACTIVITIES
To manage the project construction activities in each discipline (piping, structure, pipeline with sound technical justification of painting inspection) in order to ascertain the product will be built as per drawings, specification, procedures and schedule,
To coordinate the activities of NDT Supervisor, QA/QC Welding Supervisor, Painting Supervisor, in back to back organization.
To ensure that all QA/QC activities are carried out according to the approved QA/QC manuals and procedures,
To assist the PJC management team to ensure that QA/QC team will comply with Total E&P Indonιsie and project Safety objectives throughout the life of the project,
To review QA/QC procedures, including Inspection and Test Plans, developed by CTR in regards with QA/QC Inspection coordinator,
To review and accept WPS, WQPT and sign the WPQR with support of SPV, including coordination with 3rd inspector and authority certification.
To supervise inspection activities as per Inspection and Test Plans and witness time to time FAT and inspections. To coordinate with project team, inspection activities related to Inspection and Test Plans.
To follow up site engineering queries in coordination with PJC various departments and to ensure that subsequent actions are well implemented by CTR.
To report every week to CSR, QA/QC Inspection coordinator on welding progress, NC, issues, any shortcoming (material reception delay), problems and major defects on the fabrication.
To be able to revert to PJC/ENG and eventually comment the design engineering documents produced by CTR in case of discrepancies and mismatching on site.
To ensure proper reporting, utilization and data integrity of Construction Quality System by Site teams (CTR and CPY) and set up the master data of the system.
PRESSURE VESSEL SUPERINTENDENT
JOB PURPOSE
Responsible for coordinating QA/QC supervision at pressure vessel construction sites and inspection at
vendor premises and shall be performing in compliance by Project Technical Specification, Total E&P
Indonιsie and Project Quality objectives.
ACTIVITIES
To coordinate the project construction activities in each discipline (piping, structure, pipeline with sound
technical justification of painting inspection) in order to ascertain the product will be built as per drawings, specification, procedures and schedule,
To coordinate the activities of NDT Supervisor, QA/QC Welding Supervisor, Painting Supervisor, Material Supervisor in back to back organization. (if these positions are available).
To ensure that all QA/QC activities are carried out according to the approved QA/QC manuals and procedures,
To assist the PJC management team to ensure Compliance with Total E&P Indonιsie Safety objectives throughout the life of the project,
To review QA/QC procedures, including Inspection and Test Plans, developed by CTR in regards with QA/QC Inspection coordinator,
To ensure the review and accept WPS on site by third party and certifying authorities,
To coordinate Vendor premises and Yard QA/QC activities, such as WQPT and WQT with support of SPV.
To be able to approve the WQPT and sign the WPQR.
To supervise inspection activities as per Inspection and Test Plans and witness time to time FAT and inspections. To coordinate with project team, inspection activities related to Inspection and Test Plans.
To follow up site engineering queries during the procurement and construction phases of EPSC contracts and ensure the feedback to PJC/ENG. To ensure that subsequent actions are well implemented by Vendor.
To provide technical assistance on Vendor queries on site
To provide NDT assistance/expertise to Vendor.
To report every week to CSR, QA/QC Inspection coordinator on welding progress, NC, issues, any shortcoming (material reception delay), problems and major defects on the fabrication.
To be able to revert to PJC/ENG and eventually comment the design engineering documents produced by CTR in case of discrepancies and mismatching on site.
To ensure proper reporting on quality traceability.
The work location will be in Indonesia. Contract Duration will be 2 years
Please email your CV complete with Certificate directly to e_recruit_oilgas@yahoo.com
JOB DESCRIPTIONS, MINIMUM QUALIFICATIONS AND EXPERIENCE REQUIREMENTS
QA/QC SUPERINTENDENT
JOB PURPOSE
Responsible for managing and ensure that the QA/QC supervisions, all inspections and other QA/QC
matters at fabrication yard, construction sites, vendor premises shall be performing in compliance by
Project Technical Specification, Total E&P Indonιsie and Project Quality objectives.
ACTIVITIES
To manage the project construction activities in each discipline (piping, structure, pipeline with sound technical justification of painting inspection) in order to ascertain the product will be built as per drawings, specification, procedures and schedule,
To coordinate the activities of NDT Supervisor, QA/QC Welding Supervisor, Painting Supervisor, in back to back organization.
To ensure that all QA/QC activities are carried out according to the approved QA/QC manuals and procedures,
To assist the PJC management team to ensure that QA/QC team will comply with Total E&P Indonιsie and project Safety objectives throughout the life of the project,
To review QA/QC procedures, including Inspection and Test Plans, developed by CTR in regards with QA/QC Inspection coordinator,
To review and accept WPS, WQPT and sign the WPQR with support of SPV, including coordination with 3rd inspector and authority certification.
To supervise inspection activities as per Inspection and Test Plans and witness time to time FAT and inspections. To coordinate with project team, inspection activities related to Inspection and Test Plans.
To follow up site engineering queries in coordination with PJC various departments and to ensure that subsequent actions are well implemented by CTR.
To report every week to CSR, QA/QC Inspection coordinator on welding progress, NC, issues, any shortcoming (material reception delay), problems and major defects on the fabrication.
To be able to revert to PJC/ENG and eventually comment the design engineering documents produced by CTR in case of discrepancies and mismatching on site.
To ensure proper reporting, utilization and data integrity of Construction Quality System by Site teams (CTR and CPY) and set up the master data of the system.
PRESSURE VESSEL SUPERINTENDENT
JOB PURPOSE
Responsible for coordinating QA/QC supervision at pressure vessel construction sites and inspection at
vendor premises and shall be performing in compliance by Project Technical Specification, Total E&P
Indonιsie and Project Quality objectives.
ACTIVITIES
To coordinate the project construction activities in each discipline (piping, structure, pipeline with sound
technical justification of painting inspection) in order to ascertain the product will be built as per drawings, specification, procedures and schedule,
To coordinate the activities of NDT Supervisor, QA/QC Welding Supervisor, Painting Supervisor, Material Supervisor in back to back organization. (if these positions are available).
To ensure that all QA/QC activities are carried out according to the approved QA/QC manuals and procedures,
To assist the PJC management team to ensure Compliance with Total E&P Indonιsie Safety objectives throughout the life of the project,
To review QA/QC procedures, including Inspection and Test Plans, developed by CTR in regards with QA/QC Inspection coordinator,
To ensure the review and accept WPS on site by third party and certifying authorities,
To coordinate Vendor premises and Yard QA/QC activities, such as WQPT and WQT with support of SPV.
To be able to approve the WQPT and sign the WPQR.
To supervise inspection activities as per Inspection and Test Plans and witness time to time FAT and inspections. To coordinate with project team, inspection activities related to Inspection and Test Plans.
To follow up site engineering queries during the procurement and construction phases of EPSC contracts and ensure the feedback to PJC/ENG. To ensure that subsequent actions are well implemented by Vendor.
To provide technical assistance on Vendor queries on site
To provide NDT assistance/expertise to Vendor.
To report every week to CSR, QA/QC Inspection coordinator on welding progress, NC, issues, any shortcoming (material reception delay), problems and major defects on the fabrication.
To be able to revert to PJC/ENG and eventually comment the design engineering documents produced by CTR in case of discrepancies and mismatching on site.
To ensure proper reporting on quality traceability.
Skills:
MINIMUM QUALIFICATION / EXPERIENCE
QA/QC SUPERINTENDENT LEVEL 4
Engineering degree from recognize university.
Graduated from welding engineering school and holding certificates (minimum Level III) from
recognized international institution. (PCN level III recommended (or COFREND equivalent), CSWIP level III accepted and ASNT level III only accepted for Structural/Piping job). In house certifications are not accepted.
> 10 years experiences of relevant international assignment in managing QA/QC activities within Oil and Gas sector.
Recognized level of expertise in Safety, contractor management with specific knowledge of welding engineering and non destructive test.
Good communication skill.
Fluent in English, written and spoken.
Proficient with Oil and Gas International Codes and Standards for the discipline.
QA/QC SUPERINTENDENT LEVEL 3
Certified senior welding inspector (minimum Level III) from a recognized international institution. (PCN level III recommended (or COFREND equivalent), CSWIP level III accepted and ASNT level III only accepted for Structural/Piping job). In house certifications are not accepted.
5 10 years of relevant international assignment in managing QA/QC activities within Oil and Gas sector.
Recognized level of expertise in Safety, contractor management with specific knowledge of welding engineering and non destructive test.
Good communication skill.
Fluent in English, written and spoken.
Proficient with Oil and Gas International Codes and Standards for the discipline.
PRESSURE VESSEL SUPERINTENDENT LEVEL 4
Engineering degree from recognize university.
Graduated from welding engineering school or certified senior welding inspector (minimum Level II) from a recognized institution. (PCN level III recommended (or COFREND equivalent), CSWIP level III accepted and ASNT level III only accepted for Structural/Piping job). In house certifications are not accepted.
> 10 years of relevant international assignment experience in Oil and Gas sector for engineering in the discipline.
NDT UT/RT experiences and theory knowledge in pressure vessel construction.
Recognized level of expertise in Safety, contractor management with specific knowledge of welding engineering
Good communication skill.
Fluent in English, written and spoken.
Proficient with Oil and Gas International Codes and Standards for the discipline.
PRESSURE VESSEL SUPERINTENDENT LEVEL 3
Graduated from welding engineering school or certified senior welding inspector (minimum Level II) from a recognized institution. (PCN level III recommended (or COFREND equivalent), CSWIP level III accepted and ASNT level II Ionly accepted for Structural/Piping job). In house certifications are not accepted.
5 - 10 years of relevant international assignment experience in Oil and Gas sector for engineering in the discipline.
NDT UT/RT experiences and theory knowledge in pressure vessel construction.
Recognized level of expertise in Safety, contractor management with specific knowledge of welding engineering
Good communication skill.
Fluent in English, written and spoken.
Proficient with Oil and Gas International Codes and Standards for the discipline.
QA/QC SUPERINTENDENT LEVEL 4
Engineering degree from recognize university.
Graduated from welding engineering school and holding certificates (minimum Level III) from
recognized international institution. (PCN level III recommended (or COFREND equivalent), CSWIP level III accepted and ASNT level III only accepted for Structural/Piping job). In house certifications are not accepted.
> 10 years experiences of relevant international assignment in managing QA/QC activities within Oil and Gas sector.
Recognized level of expertise in Safety, contractor management with specific knowledge of welding engineering and non destructive test.
Good communication skill.
Fluent in English, written and spoken.
Proficient with Oil and Gas International Codes and Standards for the discipline.
QA/QC SUPERINTENDENT LEVEL 3
Certified senior welding inspector (minimum Level III) from a recognized international institution. (PCN level III recommended (or COFREND equivalent), CSWIP level III accepted and ASNT level III only accepted for Structural/Piping job). In house certifications are not accepted.
5 10 years of relevant international assignment in managing QA/QC activities within Oil and Gas sector.
Recognized level of expertise in Safety, contractor management with specific knowledge of welding engineering and non destructive test.
Good communication skill.
Fluent in English, written and spoken.
Proficient with Oil and Gas International Codes and Standards for the discipline.
PRESSURE VESSEL SUPERINTENDENT LEVEL 4
Engineering degree from recognize university.
Graduated from welding engineering school or certified senior welding inspector (minimum Level II) from a recognized institution. (PCN level III recommended (or COFREND equivalent), CSWIP level III accepted and ASNT level III only accepted for Structural/Piping job). In house certifications are not accepted.
> 10 years of relevant international assignment experience in Oil and Gas sector for engineering in the discipline.
NDT UT/RT experiences and theory knowledge in pressure vessel construction.
Recognized level of expertise in Safety, contractor management with specific knowledge of welding engineering
Good communication skill.
Fluent in English, written and spoken.
Proficient with Oil and Gas International Codes and Standards for the discipline.
PRESSURE VESSEL SUPERINTENDENT LEVEL 3
Graduated from welding engineering school or certified senior welding inspector (minimum Level II) from a recognized institution. (PCN level III recommended (or COFREND equivalent), CSWIP level III accepted and ASNT level II Ionly accepted for Structural/Piping job). In house certifications are not accepted.
5 - 10 years of relevant international assignment experience in Oil and Gas sector for engineering in the discipline.
NDT UT/RT experiences and theory knowledge in pressure vessel construction.
Recognized level of expertise in Safety, contractor management with specific knowledge of welding engineering
Good communication skill.
Fluent in English, written and spoken.
Proficient with Oil and Gas International Codes and Standards for the discipline.
