Carded Radiographers for X-ray (Qualification Code 2 or 3)
Posted: 6/9/2014 11:21:34 AM
This job is closed
NDT.org Job Number:
52723
* Please reference NDT.org Job Number on all correspondence
Contact:
Ruben Trevino
Phone:
713-265-5000
Fax:
713-265-5099
Company:
Global Tubing, LLC
State:
TX Texas
Contact:
Ruben Trevino
Country:
United States
Length:
Full Time
Pay:
DOE
Email:
rtrevino@global-tubing.com
Global Tubing is a tubing manufacturing Mill and Service station located just outside of Houston in Dayton Texas @ Hwy 90 & Hwy 146.
Global Tubing has open positions for Carded Radiographers in x-ray. Full time positions only. Rotating day and night schedule required.
The Quality Control department is NDT inspection combined with mechanical and metallographic lab work.
All QC personnel will:
• Perform NDT on all related tubing products and conform to specifications
• Perform Destructive testing on all related tubing products and conform to specifications
• Test any Research and Development or Failure Analysis service samples along with production orders.
• Report on and log all test results and related forms
• Write non-conformance reports for materials or products that deviate from specification
• Communicate with and assist welders, assembly personnel, and mill operators to maintain an effective production environment.
• Maintain housekeeping in all related work areas
Global Tubing has open positions for Carded Radiographers in x-ray. Full time positions only. Rotating day and night schedule required.
The Quality Control department is NDT inspection combined with mechanical and metallographic lab work.
All QC personnel will:
• Perform NDT on all related tubing products and conform to specifications
• Perform Destructive testing on all related tubing products and conform to specifications
• Test any Research and Development or Failure Analysis service samples along with production orders.
• Report on and log all test results and related forms
• Write non-conformance reports for materials or products that deviate from specification
• Communicate with and assist welders, assembly personnel, and mill operators to maintain an effective production environment.
• Maintain housekeeping in all related work areas
Skills:
Do not necessarily need to have knowledge of all these methods but training in some of these is preferred.
Destructive Testing:
• Tensile Testing
• Fatigue Testing
• Metallographic Grain Sizing
• Metallographic Specimen Preparation
• Micro-hardness Testing
• Surface Hardness Testing
• Portable Surface Hardness Testing
• Guided Bend Testing
• Flattening and Flare Testing
NDT:
• RT / Computed Radiography , x-ray , film interpretation
• ET / encircling coils
• PT / liquid penetrant
• VT / visual
• UT Thickness
• MT / wet mag.
• Dimensional Testing
Destructive Testing:
• Tensile Testing
• Fatigue Testing
• Metallographic Grain Sizing
• Metallographic Specimen Preparation
• Micro-hardness Testing
• Surface Hardness Testing
• Portable Surface Hardness Testing
• Guided Bend Testing
• Flattening and Flare Testing
NDT:
• RT / Computed Radiography , x-ray , film interpretation
• ET / encircling coils
• PT / liquid penetrant
• VT / visual
• UT Thickness
• MT / wet mag.
• Dimensional Testing
