Production Supervisor (NDT Methods)
Posted: 12/9/2015 2:19:06 PM
This job is closed
NDT.org Job Number:
56704
* Please reference NDT.org Job Number on all correspondence
Contact:
Jeremy Tomsic
Phone:
440-701-1171
Company:
Component Repair Technologies
State:
OH Ohio
Contact:
Jeremy Tomsic
Country:
United States
Length:
Full-Time
Pay:
$25
This is a 1st shift position.
Reviews and prioritizes production schedules based on product introduction, efficiency, materials supply and personnel resources; assigns associates to maximize production objectives, maintain quality and attain output requirements.
Investigates and solves quality issues and/or serves as a point of contact through which quality issues can be resolved. Ensures that employees know the importance of quality and enforces follow through. Works with quality control team to resolve issues and regularly reviews quality trends in the market.
Participates in establishing and modifying operational methods and processes by recommending changes in materials, equipment, and procedures.
Develops schedules and personnel requirements for assigned areas; maintains a variety of reports, records and production documentation to reflect schedules, performance, methods, and other manufacturing aspects.
Additional information:
CRT is committed to providing a safe and healthy workplace and promoting the health and wellbeing of its employees. It is the Company’s policy to only hire individuals who do not use tobacco. All candidates will be screened for nicotine prior to hire. Employment opportunities at CRT are open to all qualified applicants solely on the basis of their job-related experience, knowledge, skills and abilities. CRT complies with all applicable federal, state and local laws with regard to equal employment opportunity.
www.CRTjobs.com
http://www.youtube.com/watch?v=g7_pVOxhDBs
Reviews and prioritizes production schedules based on product introduction, efficiency, materials supply and personnel resources; assigns associates to maximize production objectives, maintain quality and attain output requirements.
Investigates and solves quality issues and/or serves as a point of contact through which quality issues can be resolved. Ensures that employees know the importance of quality and enforces follow through. Works with quality control team to resolve issues and regularly reviews quality trends in the market.
Participates in establishing and modifying operational methods and processes by recommending changes in materials, equipment, and procedures.
Develops schedules and personnel requirements for assigned areas; maintains a variety of reports, records and production documentation to reflect schedules, performance, methods, and other manufacturing aspects.
Additional information:
CRT is committed to providing a safe and healthy workplace and promoting the health and wellbeing of its employees. It is the Company’s policy to only hire individuals who do not use tobacco. All candidates will be screened for nicotine prior to hire. Employment opportunities at CRT are open to all qualified applicants solely on the basis of their job-related experience, knowledge, skills and abilities. CRT complies with all applicable federal, state and local laws with regard to equal employment opportunity.
www.CRTjobs.com
http://www.youtube.com/watch?v=g7_pVOxhDBs
Skills:
Minimum Qualifications:
High school diploma or the equivalent.
On the job training hours, classroom training hours, and on the job experience hours as outlined in QPM 685-001 are required to meet minimum standards for qualification to Level I or Level II.
Must pass tests given by Company NDT Level III or other NDT Level III approved by the company as outlined in QPM 685-001 to meet minimum standards for certification to Level I or Level II.
General knowledge of turbine engine component repairs, including welding, heat treat, machining, and coatings.
Pass vision tests required to meet minimum standards for qualification, including color perception and near vision.
Preferred Qualifications:
Three to five years’ experience as a Level II in NDT methods for which qualification/certification is acquired.
College level materials courses such as Intro to Metallurgy, Welding Engineering, Manufacturing Processes.
Welding inspection background or CWI.
Additional qualifications:
Technical knowledge. Overall knowledge of processes the supervisor is responsible to oversee. The ability to oversee various technical or complex processes. The ability to evaluate technical issues objectively.
Certification. Where FAA certification is required, must meet the requirements of FAR Part 65 (at least 18 months experience in the processes overseen, industry certification when required, demonstrated knowledge of applicable FAA regulations, demonstrated knowledge of CRT
Inspection Procedures Manual and quality systems). Other certifications may be specified for the specific area of responsibility.
Excellent communication and leadership skills. Ability to give and receive constructive criticism. Demonstrated leadership abilities. Ability to work within a team to achieve results. Ability to gather information and evaluate personnel issues objectively. Ability to conduct and facilitate meetings.
Ability to balance many responsibilities simultaneously.
Flexibility. Able and willing to perform work as well as oversee work. Able and willing to work a flexible schedule as the job requires.
Commitment to continuing education. Able and willing to continue technical and supervisory education through seminars or classes.
High school diploma or the equivalent.
On the job training hours, classroom training hours, and on the job experience hours as outlined in QPM 685-001 are required to meet minimum standards for qualification to Level I or Level II.
Must pass tests given by Company NDT Level III or other NDT Level III approved by the company as outlined in QPM 685-001 to meet minimum standards for certification to Level I or Level II.
General knowledge of turbine engine component repairs, including welding, heat treat, machining, and coatings.
Pass vision tests required to meet minimum standards for qualification, including color perception and near vision.
Preferred Qualifications:
Three to five years’ experience as a Level II in NDT methods for which qualification/certification is acquired.
College level materials courses such as Intro to Metallurgy, Welding Engineering, Manufacturing Processes.
Welding inspection background or CWI.
Additional qualifications:
Technical knowledge. Overall knowledge of processes the supervisor is responsible to oversee. The ability to oversee various technical or complex processes. The ability to evaluate technical issues objectively.
Certification. Where FAA certification is required, must meet the requirements of FAR Part 65 (at least 18 months experience in the processes overseen, industry certification when required, demonstrated knowledge of applicable FAA regulations, demonstrated knowledge of CRT
Inspection Procedures Manual and quality systems). Other certifications may be specified for the specific area of responsibility.
Excellent communication and leadership skills. Ability to give and receive constructive criticism. Demonstrated leadership abilities. Ability to work within a team to achieve results. Ability to gather information and evaluate personnel issues objectively. Ability to conduct and facilitate meetings.
Ability to balance many responsibilities simultaneously.
Flexibility. Able and willing to perform work as well as oversee work. Able and willing to work a flexible schedule as the job requires.
Commitment to continuing education. Able and willing to continue technical and supervisory education through seminars or classes.
