RCS has an immediate need for a RT Inspector Level II in Mt. Vernon, IN. This is a direct hire opportunity offering a competitive benefits package including relocation assistance if needed.

Primary Responsibilities:

- Radiographic Inspection (RT):
- Prepare components as required for inspection.
- Loading film into the cassette, placing film in the required location on component being x-rayed, loading film into the film processor as required.
- Cleans component surfaces as required prior to RT using compressed air, shop towels or solvents.
- Checking film for placement of pentameters, numbers, proper density and evaluates film to specified requirements.
- Liquid Penetrant Inspection (PT):
- Prepares surfaces as required by grinding to remove paints, scale, weld spatter, and other surface irregularities; uses solvent to remove grease, oil, tape, tape residue, dirt, etc.
- Applies penetrant using proper applicators.
- Removes excess penetrant using shop towels or paper towels.
- Applies developer using proper applicators.
- Evaluates test results using proper lighting.
- Removes penetrant materials and cleans surfaces upon completion of testing, using solvents, towels/cloths.
- Magnetic particle Inspection (MT):
- Prepares surfaces as required by grinding to remove paint, scale, weld spatter, and other surface irregularities.
- Uses solvents to remove grease, oil, tape, tape residue, paint, dirt, etc.
- Performs required AC/DC dry or wet test technique using proper equipment and accessories.
- Evaluates test results using proper lighting.
- Demagnetizes parts if required.
- Cleans surfaces upon completion of testing to remove particles using compressed air, shop tows or solvents.
- Grinds and verifies the removal of prod marks.
- Works in accordance with written Quality Control technical procedures, manufacturing processing instructions, and verbal instructions provided by immediate supervisor.
- Does incidental grinding & polishing as required.
- Uses the required tools, equipment, accessories, and procedures to perform the specified inspection test method.
- Evaluates test results and makes accept/reject decisions in accordance with procedure criteria and provide written documentation as required.
- Identifies defects, removes defects when directed using proper hand tools, prepares resultant cavities suitably for welding, charts general locations of defective areas, documents non-relevant conditions with charts/sketches and proper written conclusions, maintains proper preheat controls during tests.
- Moves materials, parts and components as directed.
- Sets up and works from scaffolding, moves major scaffolding after initial set-up, moves and re-sets preheat equipment as required to maintain preheat controls.
- Works from written and verbal instructions and drawings.
- Informs proper personnel of test results.
- Responsible for exact process and related documentation auditable by the customer.
- Provides individual signature and detailed inspection data on applicable documents providing verification of work performed.
- Maintains records as directed, keeps work area clean, neat and orderly.

Requirements:

- Must pass Quality Control tests consisting of written and practical examinations and eye examination(s) to qualify and maintain qualifications for Level II NDE in MT, PT and RT Methods.
- High School Diploma or GED required. Plus a two year technical school or equivalent training.
- Qualified candidates must be a U.S. citizen, able to receive a government security clearance (this requires an EXTENSIVE background investigation), work any shift, and pass physical examination, along with alcohol and drug screening.

Opportunities with RCS change daily. For a complete listing of our current openings, please visit our website at www.rcscorporation.com . EOE/M/F/Veterans/Disabled.