Eddy Current Level II - Denver, CO area - Permanent
Posted: 4/25/2024 1:56:25 PM
NDT.org Job Number:
78116
* Please reference NDT.org Job Number on all correspondence
Contact:
Eric Eberius
Phone:
803-582-9884
Company:
Intermountain Testing Company
State:
CO Colorado
Contact:
Eric Eberius
Country:
United States
Length:
Permanent
Pay:
BOE and Certs see Description for pay range
Email:
eeberius@atslab.com
Applied Technical Services, LLC ("ATS" or the "Company") is a leading provider of critical testing, inspection, certification, and compliance services. The Company serves clients across a diverse set of large and stable end markets including manufacturing, power generation, aerospace, medical, and defense. ATS was founded in 1967 and is headquartered in Marietta, GA. Today the Company employs nearly 1,600 team members in over 60 locations across the United States.
Our purpose is to create a safe and reliable world and our mission is to deliver assurance through precise technical and professional services.
Summary: ATS is seeking a fulltime Level II Eddy Current Tech to support our ATS Family of Companies near Denver, CO. Typical hourly pay rate for this position ranges from approximately $30-$35 Based on experience and certs.
Responsibilities/ Duties:
You must be proficient in performing Eddy Current inspections to the client's expectations.
Proficient in Eddy Current testing equipment; capable of performing calibration tests.
Must be knowledgeable in Eddy Current inspection.
Must be able to inspect and interpret test results.
Must be proficient in documenting results of the Eddy Current inspection(s).
Must be able to identify all unacceptable discontinuities for location and dimension.
Must be mechanically inclined to identify failures in the Eddy Current inspection equipment.
Must be capable of servicing projects with limited supervision.
Responsibilities/Duties:
Perform examinations of materials in accordance with procedures, codes, standards, and specifications.
Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for OJT and guidance of trainees
Interface with department managers and clients to determine scope of work and work priorities in order to meet customer expectations.
Be able to prepare written instructions and to organize and report the results of examinations.
Work independently and support team members Perform other job related tasks as needed and assigned by supervisors.
Our purpose is to create a safe and reliable world and our mission is to deliver assurance through precise technical and professional services.
Summary: ATS is seeking a fulltime Level II Eddy Current Tech to support our ATS Family of Companies near Denver, CO. Typical hourly pay rate for this position ranges from approximately $30-$35 Based on experience and certs.
Responsibilities/ Duties:
You must be proficient in performing Eddy Current inspections to the client's expectations.
Proficient in Eddy Current testing equipment; capable of performing calibration tests.
Must be knowledgeable in Eddy Current inspection.
Must be able to inspect and interpret test results.
Must be proficient in documenting results of the Eddy Current inspection(s).
Must be able to identify all unacceptable discontinuities for location and dimension.
Must be mechanically inclined to identify failures in the Eddy Current inspection equipment.
Must be capable of servicing projects with limited supervision.
Responsibilities/Duties:
Perform examinations of materials in accordance with procedures, codes, standards, and specifications.
Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for OJT and guidance of trainees
Interface with department managers and clients to determine scope of work and work priorities in order to meet customer expectations.
Be able to prepare written instructions and to organize and report the results of examinations.
Work independently and support team members Perform other job related tasks as needed and assigned by supervisors.
Skills:
Minimum: Requirements/Qualifications:
Level II or III ET Technicians – Provide documentation of education, training, and experience in the applicable NDT method(s); have a working knowledge of industrial environments and general manufacturing processes; ability to effectively communicate with other departments, and customers to report issues and solve problems.
High school diploma or equivalent
Current Level IIA or Level III Certification in Eddy Current is required
Tubing and/or surface inspection experience
All applicants require the following:
Ability to learn and comply with all company policies and procedures.
Excellent communication skills written and verbal.
Applicants must pass a drug screen and have a valid driver’s license with a clean driving record.
“U.S. Persons” Only: A requirement of this position is access to information that is subject to U.S. export controls under the U.S. International Traffic in Arms Regulations (“ITAR”). Accordingly, the company will consider only “U.S. Persons” for this position. A “U.S. Person” includes (a) U.S. citizens or nationals; (b) U.S. lawful permanent residents (i.e., “green card” holders); (c) persons granted refugee status; or (d) persons granted asylum in the United States. This information is collected solely for purposes of complying with U.S. export control requirements and will not be used to unlawfully discriminate in the hiring process.
Work Conditions:
Must be able to wear safety equipment as required by the safety department for personal protection.
Work from heights on scaffolding, ladders, elevated platforms, man-baskets, etc.
Work in confined spaces which will require crawling, stooping, climbing, etc.
Work in around operating equipment and industrial environments.
Work with radiation and hazardous materials such as cleaners, penetrants, film developing chemicals, etc.
Work shifts up to 12 hours/day and 7 days/week and travel for extended periods of time
Ability to lift and carry 100 pounds.
Benefits: ATS offers excellent wages and advancement opportunities. ATS full-time employee benefits include: medical, dental, vision, 401k, vacation, personal time, and bonuses.
EOE/AA/M/F/Vet/Disabled
Applied Technical Services is an equal opportunity employer where employment is based upon personal capabilities and qualifications without discrimination due to race, color, religion, gender, age, national origin, disability, veteran status or any other protected characteristic as established by law.
Level II or III ET Technicians – Provide documentation of education, training, and experience in the applicable NDT method(s); have a working knowledge of industrial environments and general manufacturing processes; ability to effectively communicate with other departments, and customers to report issues and solve problems.
High school diploma or equivalent
Current Level IIA or Level III Certification in Eddy Current is required
Tubing and/or surface inspection experience
All applicants require the following:
Ability to learn and comply with all company policies and procedures.
Excellent communication skills written and verbal.
Applicants must pass a drug screen and have a valid driver’s license with a clean driving record.
“U.S. Persons” Only: A requirement of this position is access to information that is subject to U.S. export controls under the U.S. International Traffic in Arms Regulations (“ITAR”). Accordingly, the company will consider only “U.S. Persons” for this position. A “U.S. Person” includes (a) U.S. citizens or nationals; (b) U.S. lawful permanent residents (i.e., “green card” holders); (c) persons granted refugee status; or (d) persons granted asylum in the United States. This information is collected solely for purposes of complying with U.S. export control requirements and will not be used to unlawfully discriminate in the hiring process.
Work Conditions:
Must be able to wear safety equipment as required by the safety department for personal protection.
Work from heights on scaffolding, ladders, elevated platforms, man-baskets, etc.
Work in confined spaces which will require crawling, stooping, climbing, etc.
Work in around operating equipment and industrial environments.
Work with radiation and hazardous materials such as cleaners, penetrants, film developing chemicals, etc.
Work shifts up to 12 hours/day and 7 days/week and travel for extended periods of time
Ability to lift and carry 100 pounds.
Benefits: ATS offers excellent wages and advancement opportunities. ATS full-time employee benefits include: medical, dental, vision, 401k, vacation, personal time, and bonuses.
EOE/AA/M/F/Vet/Disabled
Applied Technical Services is an equal opportunity employer where employment is based upon personal capabilities and qualifications without discrimination due to race, color, religion, gender, age, national origin, disability, veteran status or any other protected characteristic as established by law.
