Level II -or- Level III PAUT Technician
Posted: 1/18/2024 7:26:08 PM
This job is closed
NDT.org Job Number:
78385
* Please reference NDT.org Job Number on all correspondence
Contact:
Suzanne M Alexander
Phone:
(404) 447-6903
Company:
National Inspection & Consultants, LLC/an ISS Company
State:
TX Texas
Contact:
Suzanne M Alexander
Country:
United States
Length:
Full Time Permanent
Pay:
Negotiable
Email:
Suzanne.Alexander@iss-na.com
We are currently looking for a solid Level II or Level III UT Phased Array Technician with ASME Piping and Vessel experience who is local or willing to relocate to the West TX area.
MUST be able to set-up and operate Olympus OmniScan MX2 PAUT Flaw Detector and perform daily weld inspections with very minimal supervision.
- Level II – NDT Level II individual shall have sufficient technical knowledge and skills to be qualified to set up and calibrate equipment and to interpret and evaluate results with respect to applicable codes, standards and specifications.
- The NDT Level II shall be thoroughly familiar with the scope and limitations of the methods for which qualified and shall exercise assigned responsibility for on-the-job training and guidance of trainees and NDT Level I personnel.
- The NDE Level II shall be able to organize and report results of NDT tests.
REQUIREMENTS:
- Must provide proof of classroom training hours in UT and PAUT.
- Must have 40 hours of Radiation Safety Training.
- Must be able to speak, read, write, and understand the English language.
- Must be capable of following verbal and written instructions.
- Must be able to lift up to 50lbs repetitively.
- Remain constantly active throughout shift.
- Vision abilities: Near vision
- MUST BE LOCAL TO ODESSA, TX or WILLING TO RELOCATE
MUST be able to set-up and operate Olympus OmniScan MX2 PAUT Flaw Detector and perform daily weld inspections with very minimal supervision.
- Level II – NDT Level II individual shall have sufficient technical knowledge and skills to be qualified to set up and calibrate equipment and to interpret and evaluate results with respect to applicable codes, standards and specifications.
- The NDT Level II shall be thoroughly familiar with the scope and limitations of the methods for which qualified and shall exercise assigned responsibility for on-the-job training and guidance of trainees and NDT Level I personnel.
- The NDE Level II shall be able to organize and report results of NDT tests.
REQUIREMENTS:
- Must provide proof of classroom training hours in UT and PAUT.
- Must have 40 hours of Radiation Safety Training.
- Must be able to speak, read, write, and understand the English language.
- Must be capable of following verbal and written instructions.
- Must be able to lift up to 50lbs repetitively.
- Remain constantly active throughout shift.
- Vision abilities: Near vision
- MUST BE LOCAL TO ODESSA, TX or WILLING TO RELOCATE
Skills:
PAUT
UT
OmniScan
Flaw Detection
ASME Piping and Vessel
Phased Array Ultrasonic
UT
OmniScan
Flaw Detection
ASME Piping and Vessel
Phased Array Ultrasonic
