Temporary Combo Welders -2025 2nd Quarter TAR Work - North Dakota
Posted: 4/28/2025 11:33:01 PM
NDT.org Job Number:
80959
* Please reference NDT.org Job Number on all correspondence
Contact:
Yeni Craig
Company:
Acuren
State:
ND North Dakota
Contact:
Yeni Craig
Country:
United States
Length:
3 Week Turn Arround
Pay:
Based on experience and certifications
Email:
Yeni.Craig@acuren.com
Acuren Inspection is currently looking for Combo Welders for 2nd Quarter turnaround in North Dakota.
Starts May 10, 2025
The project dates are 5/10 - 5/26 possibly longer
7/12s for the duration of the project
$200/day per diem
Acuren Inspection is currently looking Combo Mig & Tig welders to support our operations in North Dakota. This position will perform welding for casting upgrades, grind/rework/prep areas that require welding, and general mechanical duties. Works with numerous ASTM, MIL-standards, AWS & ASME-approved procedures as well as – Welding: MIG, TIG, Plasma & Orbital, Brazing: Torch Brazing & Silver Solder, Stress Relieve: Recirculating hot-air oven, aging and embrittlement relief.
Responsibilities
Read blueprints and drawings and take or read measurements to plan layout and procedures
Determine the appropriate welding equipment or method based on requirements
Set up components for welding according to specifications.
Operate straight and angle grinders to prepare the parts that must be welded
Align components using calipers, rulers etc. and clamp pieces
Repair castings and other components by welding pieces and filling gaps
Test and inspect welded surfaces and structure to discover flaws
Maintain equipment in a condition that does not compromise safety
Experience running or reviewing MVR’s (Motor Vehicle Reports) and experience submitting or reviewing background checks.
Ability to organize and prioritize work while meeting deadlines.
Excellent grasp of industry terminology.
Strong accuracy and attention to detail.
Demonstrated effective communication and interpersonal skills.
Other work duties as assigned
Starts May 10, 2025
The project dates are 5/10 - 5/26 possibly longer
7/12s for the duration of the project
$200/day per diem
Acuren Inspection is currently looking Combo Mig & Tig welders to support our operations in North Dakota. This position will perform welding for casting upgrades, grind/rework/prep areas that require welding, and general mechanical duties. Works with numerous ASTM, MIL-standards, AWS & ASME-approved procedures as well as – Welding: MIG, TIG, Plasma & Orbital, Brazing: Torch Brazing & Silver Solder, Stress Relieve: Recirculating hot-air oven, aging and embrittlement relief.
Responsibilities
Read blueprints and drawings and take or read measurements to plan layout and procedures
Determine the appropriate welding equipment or method based on requirements
Set up components for welding according to specifications.
Operate straight and angle grinders to prepare the parts that must be welded
Align components using calipers, rulers etc. and clamp pieces
Repair castings and other components by welding pieces and filling gaps
Test and inspect welded surfaces and structure to discover flaws
Maintain equipment in a condition that does not compromise safety
Experience running or reviewing MVR’s (Motor Vehicle Reports) and experience submitting or reviewing background checks.
Ability to organize and prioritize work while meeting deadlines.
Excellent grasp of industry terminology.
Strong accuracy and attention to detail.
Demonstrated effective communication and interpersonal skills.
Other work duties as assigned
Skills:
A minimum of 3 years welding experience
Candidate should have a basic welding aptitude, 2 year technical degree or related work experience preferred
Welder shall be familiar with ASME and AWS Guideline Codes such as, but not limited to; B31.3 and D1,1
STICK & TIG welding experience required
Advanced mechanical capabilities
Experience using a variety of welding equipment and procedures (TIG specifically)
Ability to read and interpret technical documents and drawings
Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)
Metal preparations, remove discontinuities or defects prior to any repairs made by welding
Upon completion of weld repairs, surface contours require additional grinding and finishing to meet client’s specification
Benefits
Competitive pay
Medical, dental, vision, and supplemental insurance
401K Plan
Paid Holidays
Paid Time Off
Company Overview
Acuren is a trusted, single source provider of technology-enabled asset protection solutions used to evaluate the structural integrity of critical energy, industrial and public infrastructures. Committed to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition based monitoring services.
Our work is critical to the integrity and safety of industrial firms, including petroleum refinery, pipeline, power generation, pulp & paper, mining, pharmaceutical, aerospace and automotive industries. Acuren employs over 4,000 dedicated professionals supporting the mechanical integrity and inspection programs of the world’s largest industrial segments.
Acuren is a market leader. Our formula for success is straightforward: be capable locally, with certified and well-equipped personnel supported by trained, experienced leaders. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees. #LI-YC1
Apply for this job online
Email this job to a friend
Share on your newsfeed
We commit to an equal employment opportunity workplace. Consideration for employment is based upon personal capabilities and qualifications without discrimination on the basis of race, color, gender, age, religion, national origin, disability, marital status, veteran status or any other protected characteristic as established by applicable law.
Candidate should have a basic welding aptitude, 2 year technical degree or related work experience preferred
Welder shall be familiar with ASME and AWS Guideline Codes such as, but not limited to; B31.3 and D1,1
STICK & TIG welding experience required
Advanced mechanical capabilities
Experience using a variety of welding equipment and procedures (TIG specifically)
Ability to read and interpret technical documents and drawings
Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)
Metal preparations, remove discontinuities or defects prior to any repairs made by welding
Upon completion of weld repairs, surface contours require additional grinding and finishing to meet client’s specification
Benefits
Competitive pay
Medical, dental, vision, and supplemental insurance
401K Plan
Paid Holidays
Paid Time Off
Company Overview
Acuren is a trusted, single source provider of technology-enabled asset protection solutions used to evaluate the structural integrity of critical energy, industrial and public infrastructures. Committed to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition based monitoring services.
Our work is critical to the integrity and safety of industrial firms, including petroleum refinery, pipeline, power generation, pulp & paper, mining, pharmaceutical, aerospace and automotive industries. Acuren employs over 4,000 dedicated professionals supporting the mechanical integrity and inspection programs of the world’s largest industrial segments.
Acuren is a market leader. Our formula for success is straightforward: be capable locally, with certified and well-equipped personnel supported by trained, experienced leaders. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees. #LI-YC1
Apply for this job online
Email this job to a friend
Share on your newsfeed
We commit to an equal employment opportunity workplace. Consideration for employment is based upon personal capabilities and qualifications without discrimination on the basis of race, color, gender, age, religion, national origin, disability, marital status, veteran status or any other protected characteristic as established by applicable law.
