Nested Shop Inspector 510/570/653 with CWI - Tulsa, OK
Posted: 11/2/2026 3:42:13 PM
NDT.org Job Number:
83035
* Please reference NDT.org Job Number on all correspondence
Contact:
Yeni Craig
Company:
ACUREN
State:
OK Oklahoma
Contact:
Yeni Craig
Country:
United States
Length:
Full time/Nested
Pay:
Based on experience and certifications
Email:
Yeni.Craig@tics.com
Acuren is currently recruiting for Local Nested Shop Inspectors 510/570/653 with CWI to support our operation in Tulsa, OK
The Shop nspector is responsible for providing quality assurance and inspection support for companyprojects, fabrication activities, maintenance repairs, and shop operations. This position ensures that work performed by contractors, vendors, and internal crafts complies with company specifications, engineering requirements, applicable industry codes, and regulatory standards. The role serves as a key liaison between engineering, construction, maintenance, and fabrication personnel to ensure safe, compliant, and high-quality execution of work
LOCATION REQUIREMENTS: We are currently seeking local candidates based in Tulsa, OK or surrounding area (within approximately a 40-mile radius. While we welcome applications from all qualified individuals, local candidates are preferred due to the nature of the role.
The Shop nspector is responsible for providing quality assurance and inspection support for companyprojects, fabrication activities, maintenance repairs, and shop operations. This position ensures that work performed by contractors, vendors, and internal crafts complies with company specifications, engineering requirements, applicable industry codes, and regulatory standards. The role serves as a key liaison between engineering, construction, maintenance, and fabrication personnel to ensure safe, compliant, and high-quality execution of work
LOCATION REQUIREMENTS: We are currently seeking local candidates based in Tulsa, OK or surrounding area (within approximately a 40-mile radius. While we welcome applications from all qualified individuals, local candidates are preferred due to the nature of the role.
Skills:
Responsibilities
Quality Assurance and Inspection
Perform inspections of fabricated equipment, piping systems, structural steel, pressure-containing components, and associated assemblies throughout all phases of fabrication, repair, and installation.
Verify compliance with approved engineering drawings, project specifications, company standards, and applicable codes.
Conduct hold-point, witness-point, in-process, and final inspections as required.
Identify, document, and communicate quality concerns, deficiencies, and non-conformances.
Verify corrective actions are completed and effectively address identified issues.
Ensure inspection activities are completed in a timely manner to support project schedules.
Project Support
Provide inspection and quality oversight for projects from planning through commissioning and turnover.
Review/Approve project packages, including WPS/PQRs, inspection and test plans (ITPs), quality plans, and technical specifications.
Coordinate inspection activities with project managers, engineers, contractors, vendors, and operations personnel.
Monitor construction and fabrication quality to ensure project deliverables meet company expectations.
Support mechanical completion reviews, punch-list resolution, PSSRs, and project turnover activities.
Complete MOC action items, including creating action plans for others as required.
Assist in identifying quality risks and implementing preventive measures throughout project execution.
Shop and Fabrication Oversight
Monitor shop fabrication, repair, welding, machining, and assembly activities.
Verify proper material selection, identification, and traceability requirements are maintained.
Witness fabrication processes, fit-up inspections, dimensional checks, pressure testing, and equipment performance testing as required.
Ensure workmanship and fabrication practices meet established quality standards.
Support internal shop personnel in resolving quality-related issues and improving processes.
Compliance and Technical Standards
Ensure compliance with applicable industry standards and regulations, including API, ASME, AWS, OSHA, and company engineering standards.
Maintain current knowledge of relevant codes, standards, and inspection practices.
Interpret technical requirements and provide guidance to project teams and contractors.
Support audits, assessments, and regulatory compliance activities as required.
Documentation and Reporting
Prepare detailed inspection reports and maintain accurate inspection records.
Document inspection results, findings, recommendations, and corrective actions.
Maintain project quality documentation in accordance with company procedures.
Track and communicate inspection status to project stakeholders and leadership.
Submit completed packages to Company Inspectors.
Submit drawings for AutoCAD and IDMS updates.
Keep project tracker showing status and notes of all projects.
Safety Leadership
Consistently demonstrate commitment to company safety values and expectations.
Conduct inspections in accordance with all safety policies, procedures, and site requirements.
Participate in job safety planning, hazard identification, and risk mitigation activities.
Identify and report unsafe conditions and behaviors.
Exercise stop-work authority when unsafe conditions or practices present an immediate risk to personnel, equipment, or the environment.
Collaboration and Communication
Foster strong working relationships with engineering, maintenance, operations, contractors, and vendors.
Provide clear and timely communication regarding quality issues, project risks, and inspection findings.
Participate in project meetings, planning sessions, and quality reviews.
Facilitate resolution of technical and quality-related issues through collaboration and effective communication.
#LI-YC1
Requirements
Knowledge of refinery and industrial equipment inspection practices.
Working knowledge of welding, fabrication, piping, structural steel, and pressure equipment.
Ability to read and interpret engineering drawings, specifications, procedures, and technical documents.
Familiarity with applicable industry codes and standards.
Strong communication, organizational, and problem-solving skills.
Proficiency with computer applications and inspection documentation systems.
Ability to work independently while effectively managing multiple priorities.
API Certifications (510, 570, 653, 936)
AWS Certified Welding Inspector (CWI)
NDE certifications and experience
Other applicable inspection certifications
Local to Tulsa, OK
LOCATION REQUIREMENTS: We are currently seeking local candidates based in Tulsa, OK or surrounding area (within approximately a 40-mile radius. While we welcome applications from all qualified individuals, local candidates are preferred due to the nature of the role.
Quality Assurance and Inspection
Perform inspections of fabricated equipment, piping systems, structural steel, pressure-containing components, and associated assemblies throughout all phases of fabrication, repair, and installation.
Verify compliance with approved engineering drawings, project specifications, company standards, and applicable codes.
Conduct hold-point, witness-point, in-process, and final inspections as required.
Identify, document, and communicate quality concerns, deficiencies, and non-conformances.
Verify corrective actions are completed and effectively address identified issues.
Ensure inspection activities are completed in a timely manner to support project schedules.
Project Support
Provide inspection and quality oversight for projects from planning through commissioning and turnover.
Review/Approve project packages, including WPS/PQRs, inspection and test plans (ITPs), quality plans, and technical specifications.
Coordinate inspection activities with project managers, engineers, contractors, vendors, and operations personnel.
Monitor construction and fabrication quality to ensure project deliverables meet company expectations.
Support mechanical completion reviews, punch-list resolution, PSSRs, and project turnover activities.
Complete MOC action items, including creating action plans for others as required.
Assist in identifying quality risks and implementing preventive measures throughout project execution.
Shop and Fabrication Oversight
Monitor shop fabrication, repair, welding, machining, and assembly activities.
Verify proper material selection, identification, and traceability requirements are maintained.
Witness fabrication processes, fit-up inspections, dimensional checks, pressure testing, and equipment performance testing as required.
Ensure workmanship and fabrication practices meet established quality standards.
Support internal shop personnel in resolving quality-related issues and improving processes.
Compliance and Technical Standards
Ensure compliance with applicable industry standards and regulations, including API, ASME, AWS, OSHA, and company engineering standards.
Maintain current knowledge of relevant codes, standards, and inspection practices.
Interpret technical requirements and provide guidance to project teams and contractors.
Support audits, assessments, and regulatory compliance activities as required.
Documentation and Reporting
Prepare detailed inspection reports and maintain accurate inspection records.
Document inspection results, findings, recommendations, and corrective actions.
Maintain project quality documentation in accordance with company procedures.
Track and communicate inspection status to project stakeholders and leadership.
Submit completed packages to Company Inspectors.
Submit drawings for AutoCAD and IDMS updates.
Keep project tracker showing status and notes of all projects.
Safety Leadership
Consistently demonstrate commitment to company safety values and expectations.
Conduct inspections in accordance with all safety policies, procedures, and site requirements.
Participate in job safety planning, hazard identification, and risk mitigation activities.
Identify and report unsafe conditions and behaviors.
Exercise stop-work authority when unsafe conditions or practices present an immediate risk to personnel, equipment, or the environment.
Collaboration and Communication
Foster strong working relationships with engineering, maintenance, operations, contractors, and vendors.
Provide clear and timely communication regarding quality issues, project risks, and inspection findings.
Participate in project meetings, planning sessions, and quality reviews.
Facilitate resolution of technical and quality-related issues through collaboration and effective communication.
#LI-YC1
Requirements
Knowledge of refinery and industrial equipment inspection practices.
Working knowledge of welding, fabrication, piping, structural steel, and pressure equipment.
Ability to read and interpret engineering drawings, specifications, procedures, and technical documents.
Familiarity with applicable industry codes and standards.
Strong communication, organizational, and problem-solving skills.
Proficiency with computer applications and inspection documentation systems.
Ability to work independently while effectively managing multiple priorities.
API Certifications (510, 570, 653, 936)
AWS Certified Welding Inspector (CWI)
NDE certifications and experience
Other applicable inspection certifications
Local to Tulsa, OK
LOCATION REQUIREMENTS: We are currently seeking local candidates based in Tulsa, OK or surrounding area (within approximately a 40-mile radius. While we welcome applications from all qualified individuals, local candidates are preferred due to the nature of the role.
