Instrument & Electrical inspector - Taylor, TX
Posted: 11/17/2026 6:11:34 PM
NDT.org Job Number:
83097
* Please reference NDT.org Job Number on all correspondence
Contact:
Yeni Craig
Company:
ACUREN
State:
TX Texas
Contact:
Yeni Craig
Country:
United States
Length:
Full time/Nested
Pay:
Based on experience and certifications
Acuren is currently recruiting for a Instrument & Elec II to support our operation in Taylor, TX
As an I&E Technician Level II, you will be responsible for the maintenance, calibration, and repair of electrical systems and instrumentation equipment in an industrial setting. This includes troubleshooting complex electrical and control systems, ensuring proper functionality of instrumentation, and adhering to safety standards. You will work on a range of equipment such as motors, transformers, PLCs, control valves, and digital/analog end devices.
The Instrument & Elec II performs more complex installation, calibration, and maintenance work on instrumentation and electrical systems with limited supervision. This role is responsible for diagnosing and resolving equipment issues, interpreting electrical and control schematics, and ensuring reliability of process control systems. The I&E Technician II supports project execution, assists in training junior technicians, and maintains compliance with applicable codes and safety procedures. This intermediate position requires strong technical competence, analytical thinking, and the ability to perform independently in field and shop environments.
Responsibilities
Executes the specific inspections on materials, equipment and construction/installation activities on site in accordance with Company specifications and applicable Codes.
Write reports on supplied tablet utilizing Quality Inspection Reporting (QIR) app to document fabrication/installation progress.
Checks cable laying and cable identification.
Witness all relevant loop checks.
Checks power transformers, switchboard, accumulator battery, socket outlets, lighting system.
Performs visual inspections, witness dimensional test, checks rating and material for connection.
Witness tests of continuity, insulation resistance.
Checks installation of instruments.
Witness test on functional instruments.
Checks pneumatic signal connection.
Witness test communication functionalities.
Witness the tests, controls and inspections carried out.
Check conformity with the Quality Control Plan, obtain the relevant documentation, check procedures and equipment to be used in tests, controls and inspections.
Ensure the correct implementation of the approved Inspection Test Plan.
Position reports to the Versa I&E Chief Inspector.
Travel to shop, well and pipeline installations that the client is currently developing throughout the Permian Basin.
Area of Operations include L48 assets for client based out of Midland/Odessa working on upstream projects.
Coverage areas include Midland/Odessa, South Texas, Farmington, NM, Casper, WY and North Dakota. Other areas may be incorporated later. Majority of work will be performed in a shop environment with minimal travel to the field as needed.
Travel is paid at GSA mileage rates for all activities from the assigned office of operation.
Per diem is paid at GSA rates for the area worked in.
Pay commiserate with experience and highly competitive for assigned area.
Consider SAFETY as the primary responsibility in all operations
Aid Technical and Operations Supervisors in coordinating I & E maintenance activities for facility repair, installation, and modifications. Work with Operations to maintain 98% runtime at facilities
Ensure installations adhere to corporate policies, procedures, applicable codes and regulations
Manage technical projects at the field level and coordinate material and resources
Perform installation, problem diagnosis, fault analysis and repair of computerized control systems relative to the following:
Metering (volumetric and mass measurement) and control devices
Control systems (PLC, Relay Logic, DCS, etc.)
Read and draw basic electrical schematics
Basic knowledge of local area network
MODBUS Over I/P
Component level repairs to electronics circuits
Motor operated valves
Medium Voltage Switch Gear and Power Handling Equipment
Electronic tank gauging systems
Operations computer hardware and associated equipment
Supervise and/or repair electrical problems on pipeline equipment, generators, CDP’s, water injection pumps, compressor stations, LACTs
Participate in Root Cause Failure Analysis, implement preventative/predictive maintenance. Ensure all safety system testing is completed and documented
Other work duties as assigned.
Skills:
Requirements
KNOWLEDGE, SKILLS & ABILITIES:
Previous construction experience within the oil and gas industry.
Previous exposure to high voltage electrical installation including switchgear and electric drives.
Exposure to Hazardous Area installations.
Instrument calibrations including ultrasonic flow meter, level transmitters, temperature transmitters, pressure transmitters etc.
A working knowledge of IEC/ISO/NEC/ANSI/API/ISA/NFPA codes and standards relating to electrical and instrumentation work.
Working knowledge of construction standards, codes of practice and regulations/legislation relating to electrical and instrumentation work
Knowledge of safety legislation and regulations.
Proficient in the use of Microsoft Office. (Excel/Word)
Hazardous Area installation and inspection experience is an advantage.
Ability to perform well under pressure.
Thorough knowledge of pipeline systems and surface equipment, including tanks, valves, positive displacement and centrifugal pumps, electric motors, gas engines, and other pertinent equipment.
Strong understanding of pipeline transportation system operations.
Sound knowledge of PSMA, API, NEC and OSHA codes and standards with an ability to apply that knowledge to pipeline projects.
Strong computer skills (MS Office suite).
Self-motivated and able to work with little supervision.
Strong, team oriented interpersonal communication.
Supervisory, analytical and project management skills.
Programmable logic controller / Distributed control system (PLC/DCS) troubleshooting/programming experience preferred. Local Control Network experience.
EDUCATION:
Minimum of 10 years’ experience in a comparable role.
Accredited one or two-year technical diploma meeting the requirements of a professional technical designation or high school diploma with a minimum of 5-10 years progressive and related experience
Journeyman license preferred
Working Conditions
Outside environment with continuous physical effort, exposure to 5-7 elements/conditions, moderate mental effort, and occasional requests for assistance.
Willing and able (with reasonable accommodation) to travel 25% of the time on a yearly basis.
PHYSICAL JOB REQUIREMENTS & DEMANDS:
Frequently required to stand, sit, climb, balance, stoop, crouch and crawl.