AWS CWI, QC manager, CWB welding Supervisor
NDT.org Member Since: 2005
Added: 8/10/2005
Last Updated: 8/10/2005
Last Updated: 8/10/2005
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
NV Nevada
Country:
United States
Status:
I am willing to Travel.
Currently working but always looking.
I am willing to work overseas.
I prefer permanent jobs.
Currently working but always looking.
I am willing to work overseas.
I prefer permanent jobs.
Certifications
AWS CWI
SMAW 3g-4g
GMAW 3g
CWB SMAW 3g-4g
CWB GMAW 1g-2g
Certified Robot Programmer
CWB welding supervisor (by exam)
SMAW 3g-4g
GMAW 3g
CWB SMAW 3g-4g
CWB GMAW 1g-2g
Certified Robot Programmer
CWB welding supervisor (by exam)
Education
•Graduated 1993 Churchill Co. High School
Fallon, Nevada
•8/26/2000-present certified 1g,2g,3g GMAW and SMAW
•2000 Daihen Corp. Cleveland, Ohio
Certified robot programmer certificate received.
•Nov 2004 AWS CWI #04120121 exp 12/07
•Canadian Welding Bureau, Welding Supervisor by exam.
Fallon, Nevada
•8/26/2000-present certified 1g,2g,3g GMAW and SMAW
•2000 Daihen Corp. Cleveland, Ohio
Certified robot programmer certificate received.
•Nov 2004 AWS CWI #04120121 exp 12/07
•Canadian Welding Bureau, Welding Supervisor by exam.
Experience
SMI Joist Nevada
1999-present
Jonathan has served for 5+ years in the SMI Joist Nevada facility
Jonathan joined SMI in August of 1999 as a production employee. He moved into the Quality assurance dept. February of 2002 as a Line inspector, promoted to Lead Shift Inspector 2/14/03.Became QA Manager August 2004
________________________________________________________ NAS Fallon MWR
1994-1999 Head Civilian Chef, Naval Air Station Fallon Nevada Officers Club/Catering. plan and prepare Banquets and special events for up to 450 people, at a five star facility with a staff of 20 perm. Employees both Military and Civilian.
1999-present
Jonathan has served for 5+ years in the SMI Joist Nevada facility
Jonathan joined SMI in August of 1999 as a production employee. He moved into the Quality assurance dept. February of 2002 as a Line inspector, promoted to Lead Shift Inspector 2/14/03.Became QA Manager August 2004
________________________________________________________ NAS Fallon MWR
1994-1999 Head Civilian Chef, Naval Air Station Fallon Nevada Officers Club/Catering. plan and prepare Banquets and special events for up to 450 people, at a five star facility with a staff of 20 perm. Employees both Military and Civilian.
Comments
Current Job Description
1.11 – QUALITY ASSURANCE MANAGER
DUTIES
1.11.1 BASIC FUNCTION
PLANS, IMPLEMENTS, AND COORDINATES QUALITY ASSURANCE PROGRAMS. DEVELOPMENT AND RESEARCH OF PRODUCTS AND CONSUMABLES.
1.11.2 SCOPE
ENCOMPASSES A BROAD RANGE OF ACTIVITIES REQUIRED TO INSURE THE QUALITY OF THE PRODUCT.
1.11.3 WORK PERFORMED
1.11.3.1 DEVELOPS AND DIRECTS QUALITY ASSURANCE PROGRAMS INVOLVING TRAINING OF INSPECTORS AND OTHER QUALITY ASSURANCE TECHNIQUES.
1.11.3.2 MAINTAINS AND ISSUES THE QUALITY ASSURANCE MANUAL.
1.11.3.3 MONITORS, EITHER DIRECTLY OR THROUGH SUPERVISION, THE INSPECTION SERVICES.
1.11.3.4 COORDINATES WITH ENGINEERING AND MANUFACTURING PERSONNEL TO RESOLVE PROBLEMS RELATIVE TO PRODUCT DESIGN, MATERIAL SPECIFICATIONS, JIGS AND FIXTURES, AND THE PRODUCTION OPERATION THAT AFFECTS QUALITY.
1.11.3.5 DEVELOPS WELDING PROCEDURES FOR THE PRODUCTION LINE.
1.11.3.6 INITIATES SPECIAL TESTING AND ANALYSIS OF NEW PRODUCTS TO EVALUATE THE QUALITY AND RELIABILITY WHEN IN PRODUCTION.
1.11 – QUALITY ASSURANCE MANAGER
DUTIES
1.11.3.7 PARTICIPATES WITH ALL LEVELS OF MANAGEMENT IN PROBLEMS OF QUALITY ASSURANCE, MAINTAINS RECORDS AND MAKES REPORTS AS REQUIRED BY COMPANY POLICY.
1.11.3.8 DEALS DIRECTLY WITH CUSTOMERS AND/OR THEIR REPRESENTATIVES AS AN ADDED SERVICE TO OUR CUSTOMERS.
1.11.3.9 COORDINATES AND FACILITATES THE VISITS BY OUTSIDE INSPECTION FIRMS WHEN SHOP INSPECTIONS OF PRODUCTS ARE REQUIRED BY CONTRACT.
1.11.3.10 DIRECTLY SUPERVISES TEN (10) ON LINE INSPECTORS AND FOUR (4) OFF LINE INSPECTORS
.
1.11.3.11 CONTINUAL UPDATE OF THE QUALITY ASSURANCE MANUAL ON AN AS NEEDED BASIS, BUT AT A MINIMUM OF ONE REVIEW PER YEAR. UPDATES MAY BE REQUIRED BY ENGINEERING TO COMPLY WITH STRUCTURAL REQUIREMENTS, OR BY VARIOUS STANDARDS ORGANIZATIONS OR MUNICIPALITIES TO COMPLY WITH THEIR BUILDING CODES. A COPY OF ALL REVISIONS SHALL BE FORWARDED TO EACH QUALITY ASSURANCE MANUAL HOLDER (INCLUDING OUTSIDE AGENCIES GOVERNING THE COMPANY’S APPROVED FABRICATOR STATUS) BEFORE IMPLEMENTATION OF THE REVISION.
1.11.3.12 COORDINATES, SUPERVISES AND GRADES ALL WELDER CERTIFICATION TESTS.
1.11.3.13 PERFORMS SELF AUDITS OF THE COMPANY’S FACILITIES A MINIMUM OF TWICE EACH YEAR AT APPROXIMATELY 6 MONTH INTERVALS TO INSURE THAT QUALITY STANDARDS DEMONSTRATED DURING THIRD PARTY AUDITS ARE BEING MAINTAINED AT ALL TIMES. THE SELF AUDITS SHALL VERIFY THE SAME REQUIREMENTS AS LISTED IN SECTION 1.3 FOR ICBO AUDITS. THESE SELF AUDITS SHALL BE KEPT ON FILE IN THE QA MANAGER’S OFFICE.
1.11 – QUALITY ASSURANCE MANAGER
DUTIES
1.11.1 BASIC FUNCTION
PLANS, IMPLEMENTS, AND COORDINATES QUALITY ASSURANCE PROGRAMS. DEVELOPMENT AND RESEARCH OF PRODUCTS AND CONSUMABLES.
1.11.2 SCOPE
ENCOMPASSES A BROAD RANGE OF ACTIVITIES REQUIRED TO INSURE THE QUALITY OF THE PRODUCT.
1.11.3 WORK PERFORMED
1.11.3.1 DEVELOPS AND DIRECTS QUALITY ASSURANCE PROGRAMS INVOLVING TRAINING OF INSPECTORS AND OTHER QUALITY ASSURANCE TECHNIQUES.
1.11.3.2 MAINTAINS AND ISSUES THE QUALITY ASSURANCE MANUAL.
1.11.3.3 MONITORS, EITHER DIRECTLY OR THROUGH SUPERVISION, THE INSPECTION SERVICES.
1.11.3.4 COORDINATES WITH ENGINEERING AND MANUFACTURING PERSONNEL TO RESOLVE PROBLEMS RELATIVE TO PRODUCT DESIGN, MATERIAL SPECIFICATIONS, JIGS AND FIXTURES, AND THE PRODUCTION OPERATION THAT AFFECTS QUALITY.
1.11.3.5 DEVELOPS WELDING PROCEDURES FOR THE PRODUCTION LINE.
1.11.3.6 INITIATES SPECIAL TESTING AND ANALYSIS OF NEW PRODUCTS TO EVALUATE THE QUALITY AND RELIABILITY WHEN IN PRODUCTION.
1.11 – QUALITY ASSURANCE MANAGER
DUTIES
1.11.3.7 PARTICIPATES WITH ALL LEVELS OF MANAGEMENT IN PROBLEMS OF QUALITY ASSURANCE, MAINTAINS RECORDS AND MAKES REPORTS AS REQUIRED BY COMPANY POLICY.
1.11.3.8 DEALS DIRECTLY WITH CUSTOMERS AND/OR THEIR REPRESENTATIVES AS AN ADDED SERVICE TO OUR CUSTOMERS.
1.11.3.9 COORDINATES AND FACILITATES THE VISITS BY OUTSIDE INSPECTION FIRMS WHEN SHOP INSPECTIONS OF PRODUCTS ARE REQUIRED BY CONTRACT.
1.11.3.10 DIRECTLY SUPERVISES TEN (10) ON LINE INSPECTORS AND FOUR (4) OFF LINE INSPECTORS
.
1.11.3.11 CONTINUAL UPDATE OF THE QUALITY ASSURANCE MANUAL ON AN AS NEEDED BASIS, BUT AT A MINIMUM OF ONE REVIEW PER YEAR. UPDATES MAY BE REQUIRED BY ENGINEERING TO COMPLY WITH STRUCTURAL REQUIREMENTS, OR BY VARIOUS STANDARDS ORGANIZATIONS OR MUNICIPALITIES TO COMPLY WITH THEIR BUILDING CODES. A COPY OF ALL REVISIONS SHALL BE FORWARDED TO EACH QUALITY ASSURANCE MANUAL HOLDER (INCLUDING OUTSIDE AGENCIES GOVERNING THE COMPANY’S APPROVED FABRICATOR STATUS) BEFORE IMPLEMENTATION OF THE REVISION.
1.11.3.12 COORDINATES, SUPERVISES AND GRADES ALL WELDER CERTIFICATION TESTS.
1.11.3.13 PERFORMS SELF AUDITS OF THE COMPANY’S FACILITIES A MINIMUM OF TWICE EACH YEAR AT APPROXIMATELY 6 MONTH INTERVALS TO INSURE THAT QUALITY STANDARDS DEMONSTRATED DURING THIRD PARTY AUDITS ARE BEING MAINTAINED AT ALL TIMES. THE SELF AUDITS SHALL VERIFY THE SAME REQUIREMENTS AS LISTED IN SECTION 1.3 FOR ICBO AUDITS. THESE SELF AUDITS SHALL BE KEPT ON FILE IN THE QA MANAGER’S OFFICE.
