QA/QC/NDE
NDT.org Member Since: 2006
Added: 7/31/2006
Last Updated: 7/31/2006
Last Updated: 7/31/2006
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
AB Alberta
Country:
Canada
Status:
I am willing to Travel.
Currently working but always looking.
I am willing to work overseas.
Currently working but always looking.
I am willing to work overseas.
Certifications
API 510 Pressure Vessel Inspector
API 570 Pressure Piping Inspector
CSA W178.2 Welding Inspector Level II (B31.3 W59/47.1 Z662)
CGSB RT Level II
CGSB MT Level II
CGSB PT Level II
CGSB UT Level I
API 570 Pressure Piping Inspector
CSA W178.2 Welding Inspector Level II (B31.3 W59/47.1 Z662)
CGSB RT Level II
CGSB MT Level II
CGSB PT Level II
CGSB UT Level I
Education
Diploma, Welding Engineering Technology
Experience
Present Syncrude Canada Ltd. Ft. McMurray, AB
Sr Area Quality Assurance InspectorResponsible for QA/QC inspections within the Utilities department of Syncrude’s Ft. McMurray oilsands operations insuring both Syncrude and contractor maintenance personnel adhere to procedure and specification requirements including:§ Following corporate loss management practices.Stewardship of all elements of the Syncrude Quality Management Program (pressure equipment and safety valves).Reviewed engineering packages.Implementing new inspection procedures and techniques.Maintaining established inspection programs.Reporting equipment condition, and development of maintenance strategies. Setting inspection intervals as per API and jurisdiction.Maintaining thorough knowledge of QC manuals and procedures.Performed visual and NDT inspections during fabrication.Performed on stream inspections of piping systems, pressure vessels, tanks and associated equipment.Conducted PSV audits.Carried out all aspects of QC inspection during in house fabrication, installation and repair.Carried out all aspects of QA inspection during area specific projects.Insured hydrostatic pressure tests conformed to specification.Prepared and reviewed ITPs according to specification.Performed pressure vessel, tank and structural inspections.Prepared and reviewed technical reports.Maintained equipment inspection database.Carried out boiler inspections during shutdowns.Issued non-conformance reports as required.Insured all equipment was properly calibrated (NDT, welding machines, pressure gauges, electrode ovens, etc..)
2004 Canspec Group Ft. McMurray, AB Quality Assurance/Quality Controll Inspector
Responsible for QA/QC inspections within the Utilities department of Syncrudes Ft. McMurray oilsands operations as a contract inspector.Reviewed engineering packages.Performed visual and NDT inspections during fabrication.Performed on stream inspections of piping systems, pressure vessels, tanks and associated equipment.Conducted PSV audits.Insured hydrostatic pressure tests conformed to specification.Prepared ITP’s according to specification.Performed pressure vessel, tank and structural inspections.Prepared and reviewed technical reports.Maintained equipment inspection database.Carried out boiler inspections during shutdowns.Issued non-conformance reports as required.Insured all equipment was properly calibrated (NDT, welding machines, pressure gauges, electrode ovens, etc..)
2003 Reppsco Services Ft. McMurray, AB
QC Inspector
Responsible for quality control and inspection during plant expansion and shutdown projects. Oversaw QC during furnace retubing project.Reviewed contractual and specification documents.Reviewed welding procedures and drawings.Issued ITP’s as per required specification.Performed visual inspections during fabrication and installation.Coordinated NDT inspections, PWHT and reviewed results.Insured hydrostatic pressure tests conformed to specification.Document control (weld map, calibrations, qualifications, etc..)Prepared Quality Control turnover package for plant QA Inspector. Prepared and reviewed technical reports.Carried out NDT inspections.
2000–2003 Spectrol Group St. John’s, NF
Senior NDE Inspector (Offshore)
Responsible for carrying out in service, on stream inspections on the Hibernia production platform as part of a preventative maintenance program in conjunction with the requirements set forth by Loyds Register and local governing bodies (CNOPB).Coordinated with other disciplines to insure inspections were performed efficiently, effectively, timely and safely.Coordinated inspections with Loyds Register Representative. Coordinated with lead inspection and corrosion engineers onshore.Implemented and maintained an inspection plan. Performed visual and ultrasonic surveys of process piping systems.Performed critical weld inspections utilizing Small Controlled Area Radiography (SCAR) exposure device.Carried out structural and pressure vessel inspections utilizing ACFM techniques.Conducted CUI surveys utilizing radiographic techniques.Performed pressure vessel, tank and structural inspections.Performed QC and NDT on welding and modifications. Performed various NDT inspections on drilling tools and equipment.Conducted ship hull UT surveys as per Loyds Registry. Prepared and reviewed technical reports.
1994–2000 Industrial NDT Ltd. Vancouver, BC
NDT Technician
Inspections related to shop and site conformance, new fabrication and in-service assessments of boilers, tanks, pressure vessels, piping, bridges, ships, buildings, heavy mobile equipment, cranes and machinery in the pulp and paper, petro-chemical, marine, mining and construction industries.Responsible for X-Ray inspection of aluminum hull ship construction.Responsible for profile radiography surveys of process piping.Performed ultrasonic boiler surveys.Performed radiography during new boiler construction.§ Performed structural, tank, pressure vessel and piping radiography.Conducted concrete radiography inspections.Carried out crane and lifting equipment inspections.Carried out all methods of NDT during plant shut downs.Performed QC welding inspections during new fabrication.
Sr Area Quality Assurance InspectorResponsible for QA/QC inspections within the Utilities department of Syncrude’s Ft. McMurray oilsands operations insuring both Syncrude and contractor maintenance personnel adhere to procedure and specification requirements including:§ Following corporate loss management practices.Stewardship of all elements of the Syncrude Quality Management Program (pressure equipment and safety valves).Reviewed engineering packages.Implementing new inspection procedures and techniques.Maintaining established inspection programs.Reporting equipment condition, and development of maintenance strategies. Setting inspection intervals as per API and jurisdiction.Maintaining thorough knowledge of QC manuals and procedures.Performed visual and NDT inspections during fabrication.Performed on stream inspections of piping systems, pressure vessels, tanks and associated equipment.Conducted PSV audits.Carried out all aspects of QC inspection during in house fabrication, installation and repair.Carried out all aspects of QA inspection during area specific projects.Insured hydrostatic pressure tests conformed to specification.Prepared and reviewed ITPs according to specification.Performed pressure vessel, tank and structural inspections.Prepared and reviewed technical reports.Maintained equipment inspection database.Carried out boiler inspections during shutdowns.Issued non-conformance reports as required.Insured all equipment was properly calibrated (NDT, welding machines, pressure gauges, electrode ovens, etc..)
2004 Canspec Group Ft. McMurray, AB Quality Assurance/Quality Controll Inspector
Responsible for QA/QC inspections within the Utilities department of Syncrudes Ft. McMurray oilsands operations as a contract inspector.Reviewed engineering packages.Performed visual and NDT inspections during fabrication.Performed on stream inspections of piping systems, pressure vessels, tanks and associated equipment.Conducted PSV audits.Insured hydrostatic pressure tests conformed to specification.Prepared ITP’s according to specification.Performed pressure vessel, tank and structural inspections.Prepared and reviewed technical reports.Maintained equipment inspection database.Carried out boiler inspections during shutdowns.Issued non-conformance reports as required.Insured all equipment was properly calibrated (NDT, welding machines, pressure gauges, electrode ovens, etc..)
2003 Reppsco Services Ft. McMurray, AB
QC Inspector
Responsible for quality control and inspection during plant expansion and shutdown projects. Oversaw QC during furnace retubing project.Reviewed contractual and specification documents.Reviewed welding procedures and drawings.Issued ITP’s as per required specification.Performed visual inspections during fabrication and installation.Coordinated NDT inspections, PWHT and reviewed results.Insured hydrostatic pressure tests conformed to specification.Document control (weld map, calibrations, qualifications, etc..)Prepared Quality Control turnover package for plant QA Inspector. Prepared and reviewed technical reports.Carried out NDT inspections.
2000–2003 Spectrol Group St. John’s, NF
Senior NDE Inspector (Offshore)
Responsible for carrying out in service, on stream inspections on the Hibernia production platform as part of a preventative maintenance program in conjunction with the requirements set forth by Loyds Register and local governing bodies (CNOPB).Coordinated with other disciplines to insure inspections were performed efficiently, effectively, timely and safely.Coordinated inspections with Loyds Register Representative. Coordinated with lead inspection and corrosion engineers onshore.Implemented and maintained an inspection plan. Performed visual and ultrasonic surveys of process piping systems.Performed critical weld inspections utilizing Small Controlled Area Radiography (SCAR) exposure device.Carried out structural and pressure vessel inspections utilizing ACFM techniques.Conducted CUI surveys utilizing radiographic techniques.Performed pressure vessel, tank and structural inspections.Performed QC and NDT on welding and modifications. Performed various NDT inspections on drilling tools and equipment.Conducted ship hull UT surveys as per Loyds Registry. Prepared and reviewed technical reports.
1994–2000 Industrial NDT Ltd. Vancouver, BC
NDT Technician
Inspections related to shop and site conformance, new fabrication and in-service assessments of boilers, tanks, pressure vessels, piping, bridges, ships, buildings, heavy mobile equipment, cranes and machinery in the pulp and paper, petro-chemical, marine, mining and construction industries.Responsible for X-Ray inspection of aluminum hull ship construction.Responsible for profile radiography surveys of process piping.Performed ultrasonic boiler surveys.Performed radiography during new boiler construction.§ Performed structural, tank, pressure vessel and piping radiography.Conducted concrete radiography inspections.Carried out crane and lifting equipment inspections.Carried out all methods of NDT during plant shut downs.Performed QC welding inspections during new fabrication.
