Inspection Engineer,R.S.O., NDT Engineer,ESI supervisor
NDT.org Member Since: 2007
Added: 5/20/2007
Last Updated: 4/23/2015
Country:
United Arab Emirates
Status:
I am willing to Travel.
I am on a job and will finish soon.
Currently working but always looking.
I need a job as soon as possible.
I am willing to work overseas.
I prefer permanent jobs.
Certifications
BE,DWET,ASNT Level II,(ET),UT,MT,PT,RT,RTFI.
R.S.O.[KSA]
Education
B.E. MECHANICAL {1999-2003}
Sapthagiri College of Engineering
Periyar University, Salem.
DWET. (Diploma in Welding Engineering Technology){2006-
2007}
Annamalai University, Chidambaram.
ASNT Level II Eddy Current Testing
SIS, Chennai.
ASNT Level II UT,PT, MT,RT
IIT, Trichy
VIBRATION ANALYST
ACME, Hyderabad.
RSO (or) RPO
KA-CARE,KSA.
RTFI,ASNT(SAS)
ARAMCO,DHAHRAN.
Rotating Equipment Inspector (ARAMCO Approved)
SAP# 70009922,RIYADH
Experience
1)2014,DJC Inspection & Engineering Services, Al Jubail
(June 2008 ) May 2011 to Aug 2014
Started working at different sites through DJC , later
worked for their own NDT works. As a Environment
Infrastructure Safety Supervisor, covered many roles like
NDT Engineer, RSO-Radiation Safety Officer, Internal
audits. Most of the time spent were welder
qualifications and procedure specification record
.Meanwhile ITP and procedure development are part of
work.
2)2010,China National Chemical Engineering Company,
Beijing Nov 2010 to May 2011
Position Held : Mechanical Engineer with job
responsibilities (both rotating and static)
(Piping/Welding/Equipment/Structural)
During this working period Assigned from erection to
commissioning at Water Treatment Plant by comply RC
Standard, through all scope of mechanical job through
E(environment)Pure International Engineering Pvt.Ltd.
Sanitary water treatment plant upgradation and expansion
carried out by building ponds. Also laying ductile iron
pipes, dredges, and installation of compressor and
fabrication of structure.
3)2008, Joannou & Pareskevaides Ltd, Athens.
Position Held: Rotating Equipment Engineer.
An independent QA/QC organization committed to work for
new platform, building healthy and excellent machineries
to suit the typical environment in refineries at deserts.
I gathered many information and standard to reach new
heights. The scope is to comply with SAUDI ARAMCO
STANDARDS, and that’s what we enhanced.
Period: Nov 2008 to Aug 2010.
SAP No: 70009922
4)2008, Foster Wheeler Italiano, Milan.
Position Held: Machinery Engineer.
As a Rotating equipment Engineer, inspecting the
alignment activities and invigilating site activities.
Supervision of positioning and leveling at machinery and
clearing the queries related to maintenance aspects
through all dimensional verification. IPMT (Integrated
Project Maintenance Team) leads to good destination at
Plant building activities.
Period: Jun 2008 to Nov 2008.
5)2007, Aswartha Condition Monitoring Engineers,
Hyderabad.
Position Held: Diagnostician.
As a Vibration Analyst, monitoring the condition of
machines in ACME servicing at SIIL (Sterlite Industries
India Ltd.,) Tuticorin and ITC-PSPD, Badrachalam.
Predictive maintenance of all type of pumps, fans,
motors, turbine, compressors, agitators. Reduced bearing
consumptions and achieved no breakdown.
Data Collector, Spectrum analyzer, Balancer used: DC-12M,
(Russian Make)
Software used: DREAMS (Russia)
And also doing In situ dynamic balancing and Alignment
through Laser kit. Good knowledge in maintenance of Pumps
and Compressors.
6)2006, Scanstar NDT Services, Chennai.
Position Held: NDT Engineer.
Eddy current Specialist in inspection , material sorting
field and differentiating materials through hardness
variation. In situ tube inspection in heat exchanger
tubes at NTPCs.
A demo given to Visakhapatnam Refineries ltd., (HPCL) and
visited some sites in Andhra Pradesh & Gujarat.
In service inspection of tube bundles in surface heat
exchanger tubes, at Vindhyachal STPS (Super Thermal Power
Station) nearly 20000 tubes. Material sorted out in tube
bundles at T.I.tubes in Chennai.
Inspection system handled: INSIS-EC, INDIA make.
A simultaneous multi channel, multi frequency embedded
computer ECT system with data acquisition and analysis
for pre–service and in-service tube inspections,
Conductivity measurement, Material sorting, RFET, and
Coating Thickness measurement
Integrity degradation of heat exchanger tubes,
steam generator tubes, Residual life assessment, and
health advisories of tubular products by eddy current
testings.
7)2005, Ajit Bearing Company, Cochin.
Position Held: Marketing Engineer.
Marketing of bearing, bearing housings and accessories in
all over kerala.As an Industrial Consultant visited naval
dockyard, Shipyard, (Southern Naval command, Cochin
Shipyard ,Cochin Refineries)
Some visited sites: Milma feeds, Harrison Malayalam,
Apollo Tyres, Philips carbon, AVT McCormick, BSES, and
Cochin Refineries in Kerala.
8)2004, Yeko Enterprises, Hosur.
Position Held: Quality Control Engineer.
In automobile section, a good quality control engineer at
a small scale industry, by producing innovative
solutions.
Inspected by: Plug gauges, Ring gauges, Snap gauges.
Product: Two wheeler shock absorber parts.
NDT Exposure:
Executed shut down works in a paper industry. Inspecting
blow tank, digester tanks, oxygen reaction tank and
chlorine storage tank, through DPT, MPI, UT thickness
gauging, and visual inspection.
In Sugar Mills, crowns (pinions), rolls, and head stocks
inspected through MPI.
In Power Plants, Heat exchanger tubes were inspected by
electromagnetic induction. (ET)
Comments
CURRICULUM VITAE
ABDULLAH.M, B.E., DWET.
R.S.O. (KSA)
E-mail: eddyscan@gmail.com
79J, Yadava Street, Krishnankovil,
shahnavas.m@gmail.com
Nagercoil – 629 001,
Kanyakumari District.
Mobile : 919442562125,
Res : 91-4652-272123
OBJECTIVE
To be deserve a major role in inspection and
monitoring the trend in all kind of machinery and
materials. Be obtaining a reliable mechanical engineer
through good knowledge.
EDUCATION
R.S.O.
AlJubail,K.S.A.
VIBRATION ANALYST/ DIAGNOSTICIAN
ACME, Hyderabad.
ASNT Level II Eddy Current Testing
SIS, Chennai.
ASNT Level II UT,RT,PT,MT.
IIT, Trichy.
DWET. (Diploma in Welding Engineering Technology){2006-
2007}
Annamalai University, Chidambaram.
B.E. MECHANICAL {1999-2003}
Sapthagiri College of Engineering
Periyar University, Salem.
STUDIES PERCENTAGE YEARS
SSLC 81.4 1997
HSC 76.5 1999
DEGREE 64.5 2003
DIPLOMA 49 2007
SOFTWARE SKILLS
Operating System : Windows
Languages : C and C++
Packages : MS-Office,
AutoCAD and PRO-E.
PROFESSIONAL EXPERIENCE
2009, Joannou & Pareskevaides Ltd, Athens.
Position Held: Rotating Equipment Engineer.
An independent QA/QC organization committed to work for
new platform, building healthy and excellent machineries
to suit the typical environment in refineries at deserts.
I gathered many information and standard to reach new
heights. The scope is to comply with SAUDI ARAMCO
STANDARDS, and that’s what we enhanced.
Period: Nov 2008 to till date.
SAP No: 70009922
2008, Foster Wheeler Italiano, Milan.
Position Held: Machinery Engineer.
As a Rotating equipment Engineer, inspecting the
alignment activities and invigilating site activities.
Supervision of positioning and leveling at machinery and
clearing the queries related to maintenance aspects
through all dimensional verification. IPMT (Integrated
Project Maintenance Team) leads to good destination at
Plant building activities.
Period: Jun 2008 to Nov 2008.
2007, Aswartha Condition Monitoring Engineers, Hyderabad.
Position Held: Diagnostician.
As a Vibration Analyst, monitoring the condition of
machines in ACME servicing at SIIL (Sterlite Industries
India Ltd.,) Tuticorin and ITC-PSPD, Badrachalam.
Predictive maintenance of all type of pumps, fans,
motors, turbine, compressors, agitators. Reduced bearing
consumptions and achieved no breakdown.
Data Collector, Spectrum analyzer, Balancer used: DC-12M,
(Russian Make)
Software used: DREAMS (Russia)
And also doing In situ dynamic balancing and Alignment
through Laser kit. Good knowledge in maintenance of Pumps
and Compressors.
2006, Scanstar NDT Services, Chennai.
Position Held: NDT Engineer.
Eddy current Specialist in inspection , material sorting
field and differentiating materials through hardness
variation. In situ tube inspection in heat exchanger
tubes at NTPCs.
A demo given to Visakhapatnam Refineries ltd., (HPCL) and
visited some sites in Andhra Pradesh & Gujarat.
In service inspection of tube bundles in surface heat
exchanger tubes, at Vindhyachal STPS (Super Thermal Power
Station) nearly 20000 tubes. Material sorted out in tube
bundles at T.I.tubes in Chennai.
Inspection system handled: INSIS-EC, INDIA make.
A simultaneous multi channel, multi frequency embedded
computer ECT system with data acquisition and analysis
for pre–service and in-service tube inspections,
Conductivity measurement, Material sorting, RFET, and
Coating Thickness measurement
Integrity degradation of heat exchanger tubes,
steam generator tubes, Residual life assessment, and
health advisories of tubular products by eddy current
testings.
2005, Ajit Bearing Company, Cochin.
Position Held: Marketing Engineer.
Marketing of bearing, bearing housings and accessories in
all over kerala.As an Industrial Consultant visited naval
dockyard, Shipyard, (Southern Naval command, Cochin
Shipyard ,Cochin Refineries)
Some visited sites: Milma feeds, Harrison Malayalam,
Apollo Tyres, Philips carbon, AVT McCormick, BSES, and
Cochin Refineries in Kerala.
2004, Yeko Enterprises, Hosur.
Position Held: Quality Control Engineer.
In automobile section, a good quality control engineer at
a small scale industry, by producing innovative
solutions.
Inspected by: Plug gauges, Ring gauges, Snap gauges.
Product: Two wheeler shock absorber parts.
NDT Exposure:
Executed shut down works in a paper industry. Inspecting
blow tank, digester tanks, oxygen reaction tank and
chlorine storage tank, through DPT, MPI, UT thickness
gauging, and visual inspection.
In Sugar Mills, crowns (pinions), rolls, and head stocks
inspected through MPI.
In Power Plants, Heat exchanger tubes were inspected by
electromagnetic induction. (ET)
PERSONAL STRENGTHS
Problem solving capability
Ability to work under pressure
Positive attitude & Self motivated
Strive to achieve companies goal
CAPABILITIES
Ability to understand concepts and problem
Eager to learn
Dedicated and indefatigable.
Ambitious to achieve high position
PERSONAL PROFILE
Date of Birth : 15-07-
1982
Gender : Male
Marital status : Married
No. of dependant : 1
Nationality : Indian
Religion : Islam
Languages known : Tamil, Hindi, Malayalam,Arabic
and
English
Passport Number :
M6361989
Permanent Address : S/o.
Mr. N. Mustafa
79J,
Yadava Street, Krishnankovil,
Nagercoil – 629 001,
Kanyakumari District, Tamilnadu,
India.
Declaration
I here by declare that all the above information
is true to best of my knowledge and belief.
Place:
Signature
Date: 23/04/2015.
[M. Abdullah]