API, CWI Inspector
NDT.org Member Since: 2007
Added: 6/15/2007
Last Updated: 6/15/2007
Last Updated: 6/15/2007
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
FL Florida
Country:
United States
Status:
I am willing to Travel.
Currently working but always looking.
I am willing to work overseas.
Currently working but always looking.
I am willing to work overseas.
Certifications
Certified Welding Inspector #96030071; Certified Welding Educator #0205015E; American Petroleum Institute 653 Inspector #24746, American Petroleum Institute 510 Inspector #28030, American Petroleum Institute 570 Inspector #28934, American Petroleum Institute 580 Supplemental Inspector #31590, American Petroleum Institute 577 Supplemental Inspector #33922, ASNT IRRSP Company Level II in Visual, Magnetic Particle, Liquid Penetrant &Ultrasonic Thickness Examination
Education
MSHA /OSHA Miners Safety Course (24 Hrs)
March 2008
API University (E2G) API 580 / API 581 Risk Base Inspection (2 Day) September 2007
IP Digester Training Class February 2007
API 570 Piping Inspection (40 Hrs) June 2006
MSHA / OSHA Refresher Course (10 Hrs) September 2006
API 510 Pressure Vessel Inspections (40 Hrs) November 2005
MSHA Miners Safety Course (24 Hrs) October 2005
OSHA Construction Safety Course (16 Hrs) September 2005
OSHA Construction Safety Course (10 Hrs) December 2004
IATA-Dangerous Goods Training November 2004
API 653 Above Ground Storage Tank Inspections (40 Hrs) April 2003
D.O.T. – HAZMAT 49 CFR Part 173 Class7 December 2001
Ammunition, Explosives and Related Hazardous Materials June 1997
Refresher Mobile Crane Safety and Operations Course November 1996
NCF Equipment Management July 1996
Holland Corp Wire, Rope, and Rigging Course May1996
AWS Certification for Welding Inspection QC1-88 March 1996
Mobile Crane safety and Operation Course (40 Hrs) January 1996
Steelworker Advanced School November 1995 to February 1996
Arc Welding (Pipe) Certification 0613.1s March 1993
Hobart Gas Tungsten Arc Welding 70 hrs March 1992
Hobart Gas Tungsten Arc Welding Pipe and Tubing 70 hrs March 1992
Steelworker Basic Training February 1990 to May 1990
March 2008
API University (E2G) API 580 / API 581 Risk Base Inspection (2 Day) September 2007
IP Digester Training Class February 2007
API 570 Piping Inspection (40 Hrs) June 2006
MSHA / OSHA Refresher Course (10 Hrs) September 2006
API 510 Pressure Vessel Inspections (40 Hrs) November 2005
MSHA Miners Safety Course (24 Hrs) October 2005
OSHA Construction Safety Course (16 Hrs) September 2005
OSHA Construction Safety Course (10 Hrs) December 2004
IATA-Dangerous Goods Training November 2004
API 653 Above Ground Storage Tank Inspections (40 Hrs) April 2003
D.O.T. – HAZMAT 49 CFR Part 173 Class7 December 2001
Ammunition, Explosives and Related Hazardous Materials June 1997
Refresher Mobile Crane Safety and Operations Course November 1996
NCF Equipment Management July 1996
Holland Corp Wire, Rope, and Rigging Course May1996
AWS Certification for Welding Inspection QC1-88 March 1996
Mobile Crane safety and Operation Course (40 Hrs) January 1996
Steelworker Advanced School November 1995 to February 1996
Arc Welding (Pipe) Certification 0613.1s March 1993
Hobart Gas Tungsten Arc Welding 70 hrs March 1992
Hobart Gas Tungsten Arc Welding Pipe and Tubing 70 hrs March 1992
Steelworker Basic Training February 1990 to May 1990
Experience
TechCorr
Contract Site Supervisor (Sinclair Refinery Casper, WY.)
August 2008 to Present
Instrumental in establishing a mechanical integrity program. Reviewing process flow diagrams, piping and instrument diagrams and material balance sheets. Systemize and circuitizing P&ID, provided isometric dawning’s of circuits and equipment inspection schedules as well as redline correction as needed.
Turnarounds
3 & 4 Crude Unit
5 Crude Unit
New Construction
Prime G Unit
Amine
API 653 Inspector, API 510 Inspector, API 570 Inspector, API 580 Inspector, API 577 Inspector, Certified Welding Inspector, Certified Welding Educator, NDT Trained Technician Level II Visual Inspections, Magnetic Particle Liquid Penetratant Ultrasonic Level IIA Thickness only Radiographic Assistant, IRRSP
Contract Inspector (Sinclair Refinery Sinclair, WY.)
February 2008 to August2008
Run and maintain mechanical integrity
Turnarounds
582 Crude Unit
583 Vacuum Unit
Hydro Cracker Unit
API 653 Inspector, API 510 Inspector, API 570 Inspector, API 580 Inspector, Certified Welding Inspector, Certified Welding Educator, NDT Trained Technician Level II Visual Inspections, Magnetic Particle Liquid Penetratant Ultrasonic Level IIA Thickness only Radiographic Assistant, IRRSP
Team Industrial Services, Inc
Operation Manager January 2007 to Present
Responsible for the day to day operations of the Lakeland, Florida office which employees three people. Supervise scheduling and planning for start up business. Billing and Customer relationships in the Central Florida area. While maintaining the following mentioned Certifications:
API 653 Inspector, API 510 Inspector, API 570 Inspector, Certified Welding Inspector, Certified Welding Educator, NDT Technician Company Level II Visual Inspections, Magnetic Particle Liquid Penetratant Ultrasonic Level IIA Thickness only
Acuren Inspection formerly Longview Inspection
Stationary Equipment Coordinator API/CWI Inspector September 2005 to December 2006
Assigned field activities for eleven local faculties on site for Mosaic Company with eleven employees. Entered associated pieces of equipment into Two Rivers Database bringing site current with completed inspection that where completed. Two Rivers project of API 570 piping project converting plant P&IDS to 3D Aperture drawings / Auto Cad. Review of mechanical contractors Welding Procedure Specification, Procedures and Welder Performance Qualification as well as there quality control programs
Liaison with Plant Engineer.
Carrying the following certifications:
API 653 Inspector, API 510 Inspector, Certified Welding Inspector, Certified Welding Educator, NDT Technician Company Level II Visual Inspections, Magnetic Particle Liquid Penetratant Ultrasonic Level IIA Thickness only
Division Manager June 2003 to September 2005
Responsible for the day to day operations of the Virginia Beach office which employees eleven people. Supervise scheduling and planning Outages for International Paper in Franklin VA and Roanoke Rapids NC, Billing and Customer relationships in the Virginia area. While maintaining the following mentioned Certifications With a performance of $1.2 mil and an EBIT of 17% in 2003 increased to $1.8 mil and an EBIT of 23% for 2004.
Site Supervisor / Lead Technician/ Radiographers Assistant Nov 2001 to June 2003
Site Supervisor Roanoke Rapids International Paper Plant
Assigned field activities for 4 to 6 Longview personnel.
Entered 128 pieces of equipment in to DMAPS Database bringing site current with completed inspection that where completed.
Liaison with Mill Engineer.
Site Supervisor U.S Amiens Plant
DMAPS 570 piping project converting plant P&IDS to 3D Aperture drawings.
Liaison with Plant Engineer.
Night Shift Supervisor for various boil shut downs from Mean WESTVACO, International Paper, and Georgia Pacific mills.
Established Company Certification, Procedures and R-Stamp Programs for Metals Tech in Murfreesboro, NC.
Carrying the following certifications:
Certified Welding Inspector, Certified Welding Educator, API653 Inspector, NDT Technician
Company Level II Visual Inspections, Magnetic Particle Liquid Penetratant Ultrasonic Level IIA Thickness only
Adams Industrial Services July 1999 to Nov 2001
Certified Welding Inspector
Company Level II Magnetic Particle, Liquid Penetratant, Ultrasonic Thickness Radiographers Assistant
Specialized in nondestructive testing and materials evaluations such as guided bend, nick- break, tensile pull tests, dye penetratant testing, magnetic particle testing, ultrasonic thickness testing and radiographic examinations.
Wrote and maintained reports, monitored subcontractors, and provided welding services.
DDBT Contracting March 1999 to July 1999
General Foreman
Supervised day-to-day field activities for underground CAW installation.
Liaison with customer on a day-to-day basis.
Installation of RG 6/11 cable in conduit.
Repaired / Replaced end fittings, and splitters.
United States Navy June 1989 to April 1999
Amphibious Construction Battalion Two July 1994 to April 1999
Training Coordinator
Developed lesson plans and class schedules.
Coordinated site, resources, and materials for over 30 training operations.
Provided inspections, nondestructive / destructive welding certifications, as a Certified Welding Inspector.
Provided technical assistance in accordance with AWS/ANSI Structural Steel Code, D1.l
Developed tracking system for qualifications in Warfare Program and Weaponry.
Repair Supervisor
Supervised repair crews of four welders.
Modified pontoon roadway sections to provide either a beach landing or pier side landing as needed.
Scheduled roadway sections for modification, repairs, maintenance and for sandblasting and painting.
Supervised construction of mezzanine deck and office space.
Pile Yard Supervisor
As part of the Navy's Elevated Causeway System (Modular) (ELCAS(M)), responsible for the operation of welding area to provide piling of various lengths for causeway pier system.
Operated 30-ton crane to move pile from welding area to staging area and to erect light masts along causeway pier.
Public Works Department, NAS Sigonella, Sicily June 1990 to June 1994
Maintenance and Repair Technician
Repaired / repaired metal hanger bay door, overhead roll-up doors, and metal high security entrances.
Replaced / repaired motorized security gates.
Repaired aircraft arresting gear on flight line.
Construction of park facilities and equipment such as concrete walkways, gazebos, playground equipment and exercise trail equipment.
Installation of hot water line from boiler plant to laundry facility.
Acted as part of emergency response teams for runway repair, water line breaks and sewer line repairs.
Fabricated guide rail system for lift station pumps.
Contract Site Supervisor (Sinclair Refinery Casper, WY.)
August 2008 to Present
Instrumental in establishing a mechanical integrity program. Reviewing process flow diagrams, piping and instrument diagrams and material balance sheets. Systemize and circuitizing P&ID, provided isometric dawning’s of circuits and equipment inspection schedules as well as redline correction as needed.
Turnarounds
3 & 4 Crude Unit
5 Crude Unit
New Construction
Prime G Unit
Amine
API 653 Inspector, API 510 Inspector, API 570 Inspector, API 580 Inspector, API 577 Inspector, Certified Welding Inspector, Certified Welding Educator, NDT Trained Technician Level II Visual Inspections, Magnetic Particle Liquid Penetratant Ultrasonic Level IIA Thickness only Radiographic Assistant, IRRSP
Contract Inspector (Sinclair Refinery Sinclair, WY.)
February 2008 to August2008
Run and maintain mechanical integrity
Turnarounds
582 Crude Unit
583 Vacuum Unit
Hydro Cracker Unit
API 653 Inspector, API 510 Inspector, API 570 Inspector, API 580 Inspector, Certified Welding Inspector, Certified Welding Educator, NDT Trained Technician Level II Visual Inspections, Magnetic Particle Liquid Penetratant Ultrasonic Level IIA Thickness only Radiographic Assistant, IRRSP
Team Industrial Services, Inc
Operation Manager January 2007 to Present
Responsible for the day to day operations of the Lakeland, Florida office which employees three people. Supervise scheduling and planning for start up business. Billing and Customer relationships in the Central Florida area. While maintaining the following mentioned Certifications:
API 653 Inspector, API 510 Inspector, API 570 Inspector, Certified Welding Inspector, Certified Welding Educator, NDT Technician Company Level II Visual Inspections, Magnetic Particle Liquid Penetratant Ultrasonic Level IIA Thickness only
Acuren Inspection formerly Longview Inspection
Stationary Equipment Coordinator API/CWI Inspector September 2005 to December 2006
Assigned field activities for eleven local faculties on site for Mosaic Company with eleven employees. Entered associated pieces of equipment into Two Rivers Database bringing site current with completed inspection that where completed. Two Rivers project of API 570 piping project converting plant P&IDS to 3D Aperture drawings / Auto Cad. Review of mechanical contractors Welding Procedure Specification, Procedures and Welder Performance Qualification as well as there quality control programs
Liaison with Plant Engineer.
Carrying the following certifications:
API 653 Inspector, API 510 Inspector, Certified Welding Inspector, Certified Welding Educator, NDT Technician Company Level II Visual Inspections, Magnetic Particle Liquid Penetratant Ultrasonic Level IIA Thickness only
Division Manager June 2003 to September 2005
Responsible for the day to day operations of the Virginia Beach office which employees eleven people. Supervise scheduling and planning Outages for International Paper in Franklin VA and Roanoke Rapids NC, Billing and Customer relationships in the Virginia area. While maintaining the following mentioned Certifications With a performance of $1.2 mil and an EBIT of 17% in 2003 increased to $1.8 mil and an EBIT of 23% for 2004.
Site Supervisor / Lead Technician/ Radiographers Assistant Nov 2001 to June 2003
Site Supervisor Roanoke Rapids International Paper Plant
Assigned field activities for 4 to 6 Longview personnel.
Entered 128 pieces of equipment in to DMAPS Database bringing site current with completed inspection that where completed.
Liaison with Mill Engineer.
Site Supervisor U.S Amiens Plant
DMAPS 570 piping project converting plant P&IDS to 3D Aperture drawings.
Liaison with Plant Engineer.
Night Shift Supervisor for various boil shut downs from Mean WESTVACO, International Paper, and Georgia Pacific mills.
Established Company Certification, Procedures and R-Stamp Programs for Metals Tech in Murfreesboro, NC.
Carrying the following certifications:
Certified Welding Inspector, Certified Welding Educator, API653 Inspector, NDT Technician
Company Level II Visual Inspections, Magnetic Particle Liquid Penetratant Ultrasonic Level IIA Thickness only
Adams Industrial Services July 1999 to Nov 2001
Certified Welding Inspector
Company Level II Magnetic Particle, Liquid Penetratant, Ultrasonic Thickness Radiographers Assistant
Specialized in nondestructive testing and materials evaluations such as guided bend, nick- break, tensile pull tests, dye penetratant testing, magnetic particle testing, ultrasonic thickness testing and radiographic examinations.
Wrote and maintained reports, monitored subcontractors, and provided welding services.
DDBT Contracting March 1999 to July 1999
General Foreman
Supervised day-to-day field activities for underground CAW installation.
Liaison with customer on a day-to-day basis.
Installation of RG 6/11 cable in conduit.
Repaired / Replaced end fittings, and splitters.
United States Navy June 1989 to April 1999
Amphibious Construction Battalion Two July 1994 to April 1999
Training Coordinator
Developed lesson plans and class schedules.
Coordinated site, resources, and materials for over 30 training operations.
Provided inspections, nondestructive / destructive welding certifications, as a Certified Welding Inspector.
Provided technical assistance in accordance with AWS/ANSI Structural Steel Code, D1.l
Developed tracking system for qualifications in Warfare Program and Weaponry.
Repair Supervisor
Supervised repair crews of four welders.
Modified pontoon roadway sections to provide either a beach landing or pier side landing as needed.
Scheduled roadway sections for modification, repairs, maintenance and for sandblasting and painting.
Supervised construction of mezzanine deck and office space.
Pile Yard Supervisor
As part of the Navy's Elevated Causeway System (Modular) (ELCAS(M)), responsible for the operation of welding area to provide piling of various lengths for causeway pier system.
Operated 30-ton crane to move pile from welding area to staging area and to erect light masts along causeway pier.
Public Works Department, NAS Sigonella, Sicily June 1990 to June 1994
Maintenance and Repair Technician
Repaired / repaired metal hanger bay door, overhead roll-up doors, and metal high security entrances.
Replaced / repaired motorized security gates.
Repaired aircraft arresting gear on flight line.
Construction of park facilities and equipment such as concrete walkways, gazebos, playground equipment and exercise trail equipment.
Installation of hot water line from boiler plant to laundry facility.
Acted as part of emergency response teams for runway repair, water line breaks and sewer line repairs.
Fabricated guide rail system for lift station pumps.
Comments
Skill Summary
Job planning; Office Manager; Long range planning; Resource leveling; Quality control inspecting; Familiar with various codes put out by AWS, ASME, DOD, NAVSEA, AISC; Construction drawings, Workflow and gant charts; as well as welding procedures and practices; Computer hardware and software troubleshooting.
Computer Software Experience
Microsoft Word; Microsoft Excel; Microsoft Access; Microsoft PowerPoint; Microsoft Project; Microsoft Outlook; Two Rivers; DMAPS; AutoCad 14; AutoCad 2008; Aperture; Windows Vista; Windows XP; Windows 2000; Windows NT 4.0.
Equipment Experience
Panametrics 37 DL Plus; Panametrics 36dl; Panametrics epic 2 scope; D-Meter; Magnet Particle tester (yoke/prods); lr-192 category II -Exposure devices(Spec 150, 660B D880); 300kv Baltograph II x-ray tube; 140kv baltospot x-ray tube; Hydraulic press; Millwright machine; Tensile pull machine; Miscellaneous construction, cargo handling and passenger carrying equipment.
Professional memberships
American Welding Society February 1996
American Society of Mechanical Engineers April 2002
American Society for Nondestructive Testing April 2002
American Petroleum Society January 2002
Job planning; Office Manager; Long range planning; Resource leveling; Quality control inspecting; Familiar with various codes put out by AWS, ASME, DOD, NAVSEA, AISC; Construction drawings, Workflow and gant charts; as well as welding procedures and practices; Computer hardware and software troubleshooting.
Computer Software Experience
Microsoft Word; Microsoft Excel; Microsoft Access; Microsoft PowerPoint; Microsoft Project; Microsoft Outlook; Two Rivers; DMAPS; AutoCad 14; AutoCad 2008; Aperture; Windows Vista; Windows XP; Windows 2000; Windows NT 4.0.
Equipment Experience
Panametrics 37 DL Plus; Panametrics 36dl; Panametrics epic 2 scope; D-Meter; Magnet Particle tester (yoke/prods); lr-192 category II -Exposure devices(Spec 150, 660B D880); 300kv Baltograph II x-ray tube; 140kv baltospot x-ray tube; Hydraulic press; Millwright machine; Tensile pull machine; Miscellaneous construction, cargo handling and passenger carrying equipment.
Professional memberships
American Welding Society February 1996
American Society of Mechanical Engineers April 2002
American Society for Nondestructive Testing April 2002
American Petroleum Society January 2002
