level II UT, PT, MT Technician RT Trainee
NDT.org Member Since: 2009
Added: 9/9/2009
Last Updated: 9/9/2009
Last Updated: 9/9/2009
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
TX Texas
Country:
United States
Status:
I am willing to Travel.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.
Certifications
Ultra Sonics Level II
Liquid Penetrant Level II
Magnetic Particle Level II
Radiographer trainee with 40 hr radiation safety
ADCI Entry Level Diver/Tender
ACDE Surface Supplied Diver Card
Rigging (API RP2D)
Offshore Safety & Survival (TEXAS A&M)
Safe Gulf
American Red Cross (First Aid / CPR / AED)
Hazardous Waste Operations & Emergency Response
Liquid Penetrant Level II
Magnetic Particle Level II
Radiographer trainee with 40 hr radiation safety
ADCI Entry Level Diver/Tender
ACDE Surface Supplied Diver Card
Rigging (API RP2D)
Offshore Safety & Survival (TEXAS A&M)
Safe Gulf
American Red Cross (First Aid / CPR / AED)
Hazardous Waste Operations & Emergency Response
Education
Graduated class UDT-370 The Ocean Corporation (NDT & Commercial Diving School)
Licensed loan officer
Successfully completed 60hr mortgage brokerage and loan origination course
Completed two semesters Coursework Houston Community College
Licensed loan officer
Successfully completed 60hr mortgage brokerage and loan origination course
Completed two semesters Coursework Houston Community College
Experience
Southern Technical Services
Inspector 2/2008-8/2009
Level II in UT, PT, and MT with 3,350.5 total documented NDT work hours.
RT Trainee with 40 Radiation safety and 181 documented RT work hours.
Performed inspections of pressure vessels, storage tanks, piping systems, welds, parts, and components including routine compliance API 570, 510, 653.
UT: Performed routine thickness measurement surveys, some straight beam flaw detection, and angle beam flaw detection.
PT: Performed penetrant tests using visible water washable dye and interpreted results.
MT: Performed magnetic particle inspections using the continuous wet florescent method with a longitudinal yoke.
RT: Performed radiographic inspections using a gamma ray camera with an iridium 192 source. Experience includes calculating shot times and distances, setting up 2mr boundaries, operating camera, developing film in dark room, and interpreting results
VT: Performed visual inspections
Experience using other inspection techniques includes: PMI (Positive Material Identification), pit measurement, borescope inspection, B-scan using tank crawler, vacuum box testing, floor scanning, hydro testing, spark testing, GUL guided wave, settlement surveys, valve teardown/assembly, brinell hardness testing
Responsible for writing reports, drawing piping systems, vessels, and storage tanks, interpreting codes, procedures, and previous reports, and making necessary preventative and corrective recommendations.
Cal Dive International
Tender 6/2007-2/2008
Helped with Ultrasonic NDT inspections on SAT systems, Dive Bells, and Bell Handling systems.
Performed topside support, operation, and repair of machinery.
Stick welding, oxy acetylene burning.
Set up, inspected, and operated dive stations
Set up, inspected, and operated hyperbaric Decompression chambers
Successfully and safely rigged loads to hang level or to a specifically desired angle.
Used proper crane signals to position loads
Made sure all tools were ready before the divers needed them in order to keep production at its peak level.
Tending divers in the water.
Listening intently and taking direction
Efficiently performing multiple tasks simultaneously
Setting up, cleaning, and inspecting dive hats.
Showed Leadership by taking initiative and always maintaining good communication with my crew.
The Ocean Corporation (NDT/Commercial Diving school)
Completed NDT/Commercial Diving certification Program 6/2006-5/2007
Inspector 2/2008-8/2009
Level II in UT, PT, and MT with 3,350.5 total documented NDT work hours.
RT Trainee with 40 Radiation safety and 181 documented RT work hours.
Performed inspections of pressure vessels, storage tanks, piping systems, welds, parts, and components including routine compliance API 570, 510, 653.
UT: Performed routine thickness measurement surveys, some straight beam flaw detection, and angle beam flaw detection.
PT: Performed penetrant tests using visible water washable dye and interpreted results.
MT: Performed magnetic particle inspections using the continuous wet florescent method with a longitudinal yoke.
RT: Performed radiographic inspections using a gamma ray camera with an iridium 192 source. Experience includes calculating shot times and distances, setting up 2mr boundaries, operating camera, developing film in dark room, and interpreting results
VT: Performed visual inspections
Experience using other inspection techniques includes: PMI (Positive Material Identification), pit measurement, borescope inspection, B-scan using tank crawler, vacuum box testing, floor scanning, hydro testing, spark testing, GUL guided wave, settlement surveys, valve teardown/assembly, brinell hardness testing
Responsible for writing reports, drawing piping systems, vessels, and storage tanks, interpreting codes, procedures, and previous reports, and making necessary preventative and corrective recommendations.
Cal Dive International
Tender 6/2007-2/2008
Helped with Ultrasonic NDT inspections on SAT systems, Dive Bells, and Bell Handling systems.
Performed topside support, operation, and repair of machinery.
Stick welding, oxy acetylene burning.
Set up, inspected, and operated dive stations
Set up, inspected, and operated hyperbaric Decompression chambers
Successfully and safely rigged loads to hang level or to a specifically desired angle.
Used proper crane signals to position loads
Made sure all tools were ready before the divers needed them in order to keep production at its peak level.
Tending divers in the water.
Listening intently and taking direction
Efficiently performing multiple tasks simultaneously
Setting up, cleaning, and inspecting dive hats.
Showed Leadership by taking initiative and always maintaining good communication with my crew.
The Ocean Corporation (NDT/Commercial Diving school)
Completed NDT/Commercial Diving certification Program 6/2006-5/2007
Comments
Business Plan
My plan is to increase company sales, profit, and client base. Your company and I can both benefit from my employment as a top NDT technician. I will accomplish this by using my experience, knowledge, and people skills to provide excellent service. Providing prompt quality service with pinpoint precision will prove effective in retaining our clients. By having reliable technicians on board that our companys clients can count on to be there when needed and get the job done right will help take this company to new heights. I will take advantage of all training and educational resources available to me to gain new certifications and increase my knowledge of the industry. In my spare personal time I will read books, watch videos, and listen to audio CDs to increase my education in this specific industry. Keeping up to date with the latest market changes and new legislation affecting the mission of our company will help us stay ahead of the game. We will be able to utilize the combined specialized knowledge of our team to be laser-focused on achieving our production goals.
I believe I am successful at everything I do and doing a thing right is never too much trouble.
About Me
I am a very agreeable, self-driven, confident, motivated, and organized individual. I get along well with all types of people and maintain a positive attitude and an open mind. I am a very active person who enjoys social events, spending quality time with my family, exercising, overcoming challenges, and travelling.
My plan is to increase company sales, profit, and client base. Your company and I can both benefit from my employment as a top NDT technician. I will accomplish this by using my experience, knowledge, and people skills to provide excellent service. Providing prompt quality service with pinpoint precision will prove effective in retaining our clients. By having reliable technicians on board that our companys clients can count on to be there when needed and get the job done right will help take this company to new heights. I will take advantage of all training and educational resources available to me to gain new certifications and increase my knowledge of the industry. In my spare personal time I will read books, watch videos, and listen to audio CDs to increase my education in this specific industry. Keeping up to date with the latest market changes and new legislation affecting the mission of our company will help us stay ahead of the game. We will be able to utilize the combined specialized knowledge of our team to be laser-focused on achieving our production goals.
I believe I am successful at everything I do and doing a thing right is never too much trouble.
About Me
I am a very agreeable, self-driven, confident, motivated, and organized individual. I get along well with all types of people and maintain a positive attitude and an open mind. I am a very active person who enjoys social events, spending quality time with my family, exercising, overcoming challenges, and travelling.
