NDI techniques in which I am currently certified in, which include: Maus V, Eddy Current Testing, Liquid Penetrant Testing, Magnetic Particle Testing, Ultrasonic Testing. Previously certified in Radiographic Testing, and have experience live source experience.

9/75 - 4/79 Eastern Michigan University, Ypsilanti, Michigan
Bachelor of Science/Secondary Education
Degree: 1975; GPA: 3.40

9/84 - 4/85 Tidewater Community College, Portsmouth, Virginia
Engineering Technical Assistant
Degree: 1985; GPA: 3.35

4/90 - 7/90 NDI School, Chanute Air Force Base, Illino

3/07 – Present

FRC/MA Norfolk, VA
Department of the Navy/DOD
Nondestructive Testing/ Inspector
WG-3801-10 Step 5. Inspected F-18/HH-60/E2-C2 aircraft, I perform various duties related to the non-destructive examination of metals, composites, plastics and other materials for internal and external structural defects, de-laminations, corrosion and moisture penetration. I set up and operate the necessary equipment NDI equipment, make required adjustments as necessary, and evaluate or interpret the test results within the established parameters for acceptance or rejection criteria. I use the following: NDI techniques in which I am currently certified in, which include: Eddy Current Testing, Liquid Penetrate Testing, Magnetic Particle Testing, Ultrasonic Testing, Maus V Certification/Qualification also have performed Hardness Testing along with visually inspecting every area of the component prior to NDI. perform various duties related to the
non-destructive examination of metals, composites, ceramics, plastics and other materials for internal and external structural defects, de-laminations, corrosion and moisture penetration. You may set up and operate the necessary equipment, make adjustments as necessary, and evaluate or interpret the test readings or results within the established parameters for acceptance or rejection. Test techniques you will utilize may include Eddy Current Testing, Liquid Penetrate Testing, Magnetic Particle Testing and Radiography Testing. Knowledge of radiography and X-ray equipment.


1/01 –3/07 USCG/ARSC, Elizabeth City, NC
Nondestructive Testing/ Inspector
WG-3801-11 Step 5. Currently certified Level II in the following Non-Destructive Inspecting disciplines: X-ray (digital), Ultrasonic’s, Eddy Current, Penetrant, Magnetic Particle. I have trained and assigned work to all current Nondestructive testing personnel previously hired since 1/2/2001, work closely with the machine shop mechanics and assign rework to parts that have been previous machined and require more machining operations to produce an acceptable part. apply detailed knowledge and experience in pre-induction, post rework, and analytical nondestructive inspection of structural and mechanical components of all types of aircraft (HU-25, HH-60,HH65,C-130), engines and related components to assure delivered product reliability through detection of inherent material defects or those induced during manufacture, service or rework. I Selects appropriate Nondestructive Testing (NDT) method (X-ray, magnetic particle, penetrant, eddy current, ultrasonic) and inspects specified or questionable areas or assembled or disassembled aircraft, engines and related components, as well as parts in various stages of fabrication or repair.

6/00 –1/01 NAVAVNDEP, MCAS, Cherry Point, NC 28533-0021
Nondestructive Testing Inspector and Evaluator
6/2000 to 1/01/2001; 40 hours per week; Nondestructive Testing Inspector and Evaluator; WG-3705-11; last promoted 07-2001; MCAS NADEP, Cherry Point, NC 28533; Mrs. Jeanne Thompson, (804)464-7938; may contact supervisor. Performed nondestructive inspection/testing/evaluation by using one or more of 2 common NDI methods (magnetic particle, fluorescent penetrant, eddy current), without more-than-normal supervision. I have successfully completed formal DOD recognized training in all facets of nondestructive inspection testing and evaluation. These areas of training include magnetic particle, fluorescent penetrant, eddy current, ultrasonic, radiography, temper etch, visual optics, real-time imaging systems used for radiography. Attend a radiography safety class every year as required by the radiation safety program. I formally re-certify in academics, trade theory, and perform a practical examination every three years in each of the methods to maintain certifications. I have attained and maintained Level II certification in magnetic particle, fluorescent penetrant, eddy current, ultrasonic, and radiographic methods. . Test techniques you will utilize may include Eddy Current Testing, Liquid Penetrate Testing, Magnetic Particle Testing and Radiography Testing. Knowledge of radiography and X-ray equipment. Have zero defects while working at MCAS NADEP.

1/98 – 6/00 Applied Technical Services, Chesapeake, Virginia
Inspector/Technician
Perform investigations, interview individuals, and make recommendations in emergency situations, which occur in the inspection process. Currently working for the Maintenance Engineer at the Union Camp Paper Mill in Franklin, Virginia; evaluating, troubleshooting and remedying problem areas arising during the inspection process. Producing isometric drawings of piping systems with thickness readings. Supervise and train new employees. Certified in PT, MT, and UTT, RT (Asst. /iridium source) in accordance with ATS specifications, procedures, and acceptance standard and also, ASME, API and ISO 9002 requirements. Write work orders, inspection reports, charge sheets, expense reports. Perform MT, PT, UTT, VT, on batch and/or digesters, etc. Perform Vibration Analysis on motors, pumps, and gearboxes. Record base line Ultrasonic Thickness readings and Visual Inspection on air tanks, heat exchangers, and miscellaneous tanks and vessels.

9/97 - 1/98 M.Q.S. Inspection, Inc., Wilmington, Delaware
Inspector/Technician
Performed PT, MT, UTT, RT inspection on various classes and sizes of piping on oil refinery, power plants and pump housing equipment in accordance with M.Q.S., specifications, procedures and acceptance standards. Inspected welds and piping using various M.Q.S., certification methods in the fabrication shop.

9/96 - 9/97 Receiving Severance Pay and Unemployment Compensation.

2/90 - 9/96 Naval Aviation Depot, Norfolk, Virginia
Metals Inspector/ Inspector Quality Assurance
Performed quality assurance and non-destructive inspection, certified in PT, MT, ET, RT, on various types F-14/A-6, etc.) Of aircraft, engines, missiles, shipboard vessels, ground support equipment and related mechanical and structural components, stock material and manufactured items, and evaluates and interprets the results. Required to operation a variety of non-destructive inspection methods, techniques, and equipment, and fully proficient in each method and the use of required equipment. Have a general knowledge of metals, aircraft structural characteristics.

10/83 - 2/90 Naval Aviation Depot, Norfolk, Virginia
Electroplater Journeyman Mechanic
Completed the NADEP Apprenticeship program. Required various shipboard, engines, aircraft, missiles, recover components through electroplating/selective plating processes such as: (LHE) cadmium, chromium, silver, copper, (electroless) nickel, gold, oxide coatings, anodize. manufacture, repair, modify, and/or assemble parts, equipment, systems, and structures such as buildings, aircraft, and ships. Your duties may involve welding metals and alloys; dipping or spraying molten metal coatings; electrolytic and chemical process; heat treatment of metals in a furnace or preheated chemical bath; disassembling, repairing, reassembling, and charging batteries; finishing metal surfaces; and setting up and operating an air blast shot peening machine. Some positions may involve arduous or hazardous duties and may be exposed to acid solutions, solvents, noxious fumes, and caustic chemicals.

1/83 - 10/83 Hampton Roads Sanitation District, Virginia Beach, Virginia
Maintenance Assistant
Performed maintenance in all aspect of maintaining a wastewater treatment plant. Repaired broken and clogged pumps, also took treatment samples checking for the proper the proper level of chlorine before returning treated water into the Chesapeake Bay.

7/82 - 11/82 NORSHIPCO, Norfolk, Virginia
Pipefitter Apprentice
Installed, inspected, tested steam, air, ballast, hydraulic, heating and cooling,
Piping systems aboard a variety of ships. Learned tack welding, brazing and threading of pipe, as well as characteristics of steel, copper, copper-nickel stainless steel and aluminum.

4/80 - 1/82 SER-Metro Detroit, Detroit, Michigan
Instructor
Taught such subjects as: business math/English, typing, general office procedures, word studies, employability skills, filing. Administering tests to adults; Classifying and organizing results and student records; Classifying and organizing results and student records; Organizing daily activities for participants in orientation seminars; Planning and implementing educational activities for adults with special needs; planning, organizing and teaching daily lessons for behaviorally disturbed adults; Supervising and disciplining behaviorally and emotionally disturbed adults; providing instructional support; Teaching a multitude of subjects to many different adults.

8/79 - 4/80 Minnesota Fabrics, Livonia, Michigan
Assistant Manager
Managing customer relations and support programs; providing consistent follow up to increase client satisfaction; providing customer support, interacting directly in managing field activity of accounts; providing customer relations and resolving problems; Responding to inquiries; coordinating order processing and manufacturing schedules to ensure prompt delivery of product; Generating promotional letters using computerized mail merge process; Hiring, training, evaluating and supervising an entire staff consisting of office personnel, service crews, sales people, manager trainees and managers; Performing hands on supervision in the marketplace; providing support to sales force; Resolving complex customer inquiries; responding to requests for special information;
Setting price points and retail pricing strategy; Supervising store operations; Training, motivating sales staff; training employees in sales techniques, scheduling work hours.

Currently Working for FRC-MA. Will not work for anything less than $80,000 in the United States and $130,000 overseas and must have excellent benefit package with excellent medical coverage but will consider all reasonable offers. I would prefer to work as a Corporate Level III or in a Testing Lab Setting. I Would like to remain in the Hampton Roads Virginia Area if at all possible. Have 20+ years NDI experience and vast experience in other areas as well.