12+ yrs Nuclear Quality Oversight, Mech, QA/QC NDE,
NDT.org Member Since: 2010
Added: 6/4/2010
Last Updated: 12/10/2014
Last Updated: 12/10/2014
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
GA Georgia
Country:
United States
Status:
I am willing to Travel.
I am on a job and will finish soon.
Currently working but always looking.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.
I am on a job and will finish soon.
Currently working but always looking.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.
Certifications
12+ years of Quality Assurance and NDE related experience
primarily in the Nuclear Power generation. Experienced or
knowledgeable in auditing and oversight of ASME, NQA-1,
10
CFR 50 Appendix B programs, remote and machine welding
operations, turbine, snubber, and boric acid inspections.
-------------------------------------------------------
Certifications currently or previously held include:
Supplier Quality Oversight
Vendor Oversight
*** Certifications currently or previously held:
Mechanical (ASNI N45.2.6),
VT-Weld, VT-1, VT-2, VT-3, VT-3c, IWE/IWL, Coatings
Level II MT, PT, UTT
primarily in the Nuclear Power generation. Experienced or
knowledgeable in auditing and oversight of ASME, NQA-1,
10
CFR 50 Appendix B programs, remote and machine welding
operations, turbine, snubber, and boric acid inspections.
-------------------------------------------------------
Certifications currently or previously held include:
Supplier Quality Oversight
Vendor Oversight
*** Certifications currently or previously held:
Mechanical (ASNI N45.2.6),
VT-Weld, VT-1, VT-2, VT-3, VT-3c, IWE/IWL, Coatings
Level II MT, PT, UTT
Education
*JETS Quality Consultants, Rockhill SC Oct 2014
Basic/Lead Auditor Training
---------------------------------------------------------
*PCI Energy Services, Lake Bluff IL. Mar 2008
Training included QA/QC of manual and remote welding
operation and in material and receipt inspections.
Certified to ASNI n45.2.6 Mechanical, VT-1, 2, 3,
welding, magnetic partial and liquid penetrate
inspections.
---------------------------------------------------------
*Sonic Systems International, Inc, Houston TX. Feb 2005
Certifications Included, 5 hrs of Boric Acid inspection
and surveillance, IWE/IWL, and VT-1, 3c.
---------------------------------------------------------
*The Ocean Corporation, Houston TX Dec 2002
Training included all required academics to ASNT SNT-TC-
1A in: MT, PT, UT, RT, and EC.
EPRI VT-1, 2, 3. 40Hr Hazwoper Training, Remotely
Operated Vehicle operations, Rigging 1 in accordance with
API RP2D.
Basic/Lead Auditor Training
---------------------------------------------------------
*PCI Energy Services, Lake Bluff IL. Mar 2008
Training included QA/QC of manual and remote welding
operation and in material and receipt inspections.
Certified to ASNI n45.2.6 Mechanical, VT-1, 2, 3,
welding, magnetic partial and liquid penetrate
inspections.
---------------------------------------------------------
*Sonic Systems International, Inc, Houston TX. Feb 2005
Certifications Included, 5 hrs of Boric Acid inspection
and surveillance, IWE/IWL, and VT-1, 3c.
---------------------------------------------------------
*The Ocean Corporation, Houston TX Dec 2002
Training included all required academics to ASNT SNT-TC-
1A in: MT, PT, UT, RT, and EC.
EPRI VT-1, 2, 3. 40Hr Hazwoper Training, Remotely
Operated Vehicle operations, Rigging 1 in accordance with
API RP2D.
Experience
*Westinghouse Various Locations (412) 552-9680 Supplier Construction Quality Oversight/Quality
Engineer(AP1000 Vogtle 3 & 4 Const) Feb 2012 - Present
(Contracted by Systems One Services)
Conduct oversight, surveillance activities and issuance
of surveillance reports pertaining to Westinghouse
vendors on a nuclear construction site. Participate in
internal and external audits by Westinghouse and other
agencies, to include but not limited to the NRC and ASME.
Responsibilities include using NRC inspection guidelines,
federal regulations, code requirement, and vendor
operation procedures to perform vendor surveillance and
oversight. Coached, & Reinforced, “INPO” principal’s, and
a “Safety Conscience Work Environment” concepts as part
of Westinghouse’s Global Quality and Safety program.
---------------------------------------------------------
*PCI Energy Services, Lake Bluff IL (847) 990-7594
QA Engineer Mar 2008 to Feb 2012
Provide Quality Control for welding and machining
operations for Westinghouse Nuclear Services.
Responsibilities included supervising the quality of
welding and machining on head repairs, spent fuel
canister welding and specialized equipment design and
qualification. Other duties included the issuing of
welding wire, performing visual and penetrant
inspections, receipt inspections, and proofing project
instructions and specifications.
---------------------------------------------------------
*LMT / Lambert Mac Gill Thomas INC. (949) 498-3350
QC and ISI Insp. Oct 2010 to April 2011
Performed Quality Control and flow accelerated corrosion
inspection at various nuclear power plant outages.
Certified in ASNI n45.2.6 Mechanical, VT-Weld, VT-1, 2,
and 3, IWE/IWL, UTT, MT, and PT.
---------------------------------------------------------
*URS/Washington Group Division (609) 720-2298
Senior NDE Technician Oct 2005 - Oct 2010
Performed balance of plant and flow accelerated corrosion
inspection at various nuclear, fossil, and petrochemical
plant outages. Certified in VT-1, 2, 3 weld IWE/IWL, UTT,
MT, and PT.
---------------------------------------------------------
*WEC Welding and Machining Rock Hill, SC
(Westinghouse subsidiary) (252) 668-9594
QA Engineer Sep 2009 to December 2009
Participated in the design, qualification and auditing
for the installation of a new nuclear quality control
program in accordance with NQA-1 for a welding school. I
also trained new inspectors in magnetic practical and
liquid penetrate inspections, documentation, and
dispositions.
--------------------------------------------------------
*NIC/National Inspection Consultants, FT. Myers, FL
NDE Level II Inspector (234) 939-4313
Oct 2003 to Mar 2008
Performed balance of plant, in service inspection, flow
accelerated corrosion, and snubber inspections at various
nuclear and fossil plant outages. Certified in VT-1, 2,
3, UTT, MT, and PT.
Engineer(AP1000 Vogtle 3 & 4 Const) Feb 2012 - Present
(Contracted by Systems One Services)
Conduct oversight, surveillance activities and issuance
of surveillance reports pertaining to Westinghouse
vendors on a nuclear construction site. Participate in
internal and external audits by Westinghouse and other
agencies, to include but not limited to the NRC and ASME.
Responsibilities include using NRC inspection guidelines,
federal regulations, code requirement, and vendor
operation procedures to perform vendor surveillance and
oversight. Coached, & Reinforced, “INPO” principal’s, and
a “Safety Conscience Work Environment” concepts as part
of Westinghouse’s Global Quality and Safety program.
---------------------------------------------------------
*PCI Energy Services, Lake Bluff IL (847) 990-7594
QA Engineer Mar 2008 to Feb 2012
Provide Quality Control for welding and machining
operations for Westinghouse Nuclear Services.
Responsibilities included supervising the quality of
welding and machining on head repairs, spent fuel
canister welding and specialized equipment design and
qualification. Other duties included the issuing of
welding wire, performing visual and penetrant
inspections, receipt inspections, and proofing project
instructions and specifications.
---------------------------------------------------------
*LMT / Lambert Mac Gill Thomas INC. (949) 498-3350
QC and ISI Insp. Oct 2010 to April 2011
Performed Quality Control and flow accelerated corrosion
inspection at various nuclear power plant outages.
Certified in ASNI n45.2.6 Mechanical, VT-Weld, VT-1, 2,
and 3, IWE/IWL, UTT, MT, and PT.
---------------------------------------------------------
*URS/Washington Group Division (609) 720-2298
Senior NDE Technician Oct 2005 - Oct 2010
Performed balance of plant and flow accelerated corrosion
inspection at various nuclear, fossil, and petrochemical
plant outages. Certified in VT-1, 2, 3 weld IWE/IWL, UTT,
MT, and PT.
---------------------------------------------------------
*WEC Welding and Machining Rock Hill, SC
(Westinghouse subsidiary) (252) 668-9594
QA Engineer Sep 2009 to December 2009
Participated in the design, qualification and auditing
for the installation of a new nuclear quality control
program in accordance with NQA-1 for a welding school. I
also trained new inspectors in magnetic practical and
liquid penetrate inspections, documentation, and
dispositions.
--------------------------------------------------------
*NIC/National Inspection Consultants, FT. Myers, FL
NDE Level II Inspector (234) 939-4313
Oct 2003 to Mar 2008
Performed balance of plant, in service inspection, flow
accelerated corrosion, and snubber inspections at various
nuclear and fossil plant outages. Certified in VT-1, 2,
3, UTT, MT, and PT.
Comments
**I am one of the ones that very much enjoy what I do and I
am very passionate about Quality.
**I hold a current US Passport holder
**I love to travel
Ex-Military
-----------------------------------------------------------
*US Air force Active Reserves (Honorable Discharge)
Structural Aircraft Mechanic Sep 1999 to Sep 2004
*US Army Active (Honorable Discharge)
Multiple Launch Rocket Systems(MLRS) Sep 1996 to Sep 1999
am very passionate about Quality.
**I hold a current US Passport holder
**I love to travel
Ex-Military
-----------------------------------------------------------
*US Air force Active Reserves (Honorable Discharge)
Structural Aircraft Mechanic Sep 1999 to Sep 2004
*US Army Active (Honorable Discharge)
Multiple Launch Rocket Systems(MLRS) Sep 1996 to Sep 1999
