Level II Penetrant, X-Ray, Ultransonic Thickness I, Eddy
Current I, Visual, Blue Etch, Electropolish, Etching.

ASSOCIATE IN APPLIED SCIENCE (NDT), SALT LAKE COMMUNITY
COLLEGE, WEST VALLEY, UTAH
DEANS LIST

ASSOCIATE IN ARTS & SCIENCE, BYU, REXBURG, IDAHO

PROFESSIONAL EXPERIENCE

QUALITY CONTROL SUPERIOR TECHNICAL RESOURCES/ L-3
COMMUNICATIONS, SLC, UTAH
November 29, 2010- Present
Inspect complex parts to print and parts list per Quality
Assurance Program Plan (QAPP) and workmanship standards.
Excellent team player and support overtime when necessary.

Equipments/Tooling
Tread gages, Gage pins, Ring gages, Height gage, Drop
indicator, Dial indicators, Calipers, OD micrometers, ID
micrometers, Depth micrometers, Groove micrometer, Optical
comparator, Inner tester, Prophilometer, Zeiss Cmm,
Mitutoyo Cmm, Scratch Gage, Square Gage, Spectrophotometer
(Paint), Gloss Meter.

Software/Programs
Electronic router system, Prim, CS Log, EZ data, Seas,
Dispatch, Work center, Manufacturing build request, Silent
Expeditor, Barcode Collection, Solid Edge, Trac, Colypso, M
Cosmos,

Other Skills/Training
EIR training
IPC Certified





PENETRANT LEVEL II INSPECTOR, QUEST AIRCRAFT, SANDPOINT,
IDAHO
September 2009 –October 2010
Process and inspect high stressed components before they are
assembled, ensuring the safety of the plane and passengers.
Daily process controls, checking penetrant sensitivity,
making sure the developer is not contaminated and black
light strength.

Penetrant Testing Level II
Testing the highly stress components making sure they comply
too company and FAA standards.

Eddy Current Level I
Checking for cracks around rivets and other surfaces of the
plane.

Ultrasonic Thickness Testing
Checking the thickness of material when damage that has
occurred.

PENETRANT LEVEL II INSPECTOR, WILLIAMS INTERNATIONAL, OGDEN,
UTAH
November 2002-August 2009
Process and inspect parts for assembly in turbine jet
engines ensuring they will run properly. Daily process
controls, checking penetrants sensitivity, make sure
developer is not contaminated and check black lights
strength.

Penetrant Testing Level II
Processing jet engines parts thru penetrant line, and
inspecting parts to specifications.

Blue Etch
Check the strength of the acid, controlling the amount of
material taken off parts before inspecting and ensuring
quality control.

Visual Inspection
Check the parts making sure that all processes and
operations were followed to specification, then check for
damage.

Final Inspection
Check the planning to make sure that all operation were
stamp off, all the correct stamps were used, check that
there are no open D stamps, take corrective action to
rectify any problems.

X-RAY TECH, GOLDEN STATES CASTINGS, OGDEN, UTAH
November2000-November 2002
Running x-ray machines, 320kv, 420kv, adjusting the time to
produce a quality radiography. Check the speeds of the film
processors and clean out jammed film when necessary
maintaining maintenance upkeep for smooth operation of film
processors. Examine the strength of developer, hardener and
flow rate of processors keeping the process within
parameters required.

Electropolishing
Electrochemical polishing processing that removes material
from metallic work pieces.

X-RAY LEVEL II, ALLIANT TECHSYSTEMS, MAGNA, UTAH
January 1999-Noveber 2000
Running of RTR, RTIS, HECT, 320kv, Rod Anode, Linatron 6000
x-ray machines. Perform daily process controls, processing
of film, sorting of film, inspection of various x-ray
images. Set up for x-ray of rockets.

Penetrant Testing Level II
Penetrant inspection of mixing blades, mixing bowls and
other equipment.

KILN FIREMAN, INTERSTATE BRICK, WEST JORDAN, UTAH
March 1989-January 1999
Controlling temperatures in kiln, taking brick samples out
of the kiln checking for carbon percentages in the brick,
checking the size of the bricks going into the kiln and
coming out of the kiln along with the weight of brick and
the height of the stacked brick. Rebuilding burners,
controlling the gas and air mix of each burner. Rebuilding
kiln when shut down.

EDUCATION

ASSOCIATE IN APPLIED SCIENCE (NDT), SALT LAKE COMMUNITY
COLLEGE, WEST VALLEY, UTAH
DEAN’S LIST

ASSOCIATE IN ARTS & SCIENCE, RICK’S COLLEGE, REXSBURG, IDAHO

PROFESSIONAL SUMMARY

Over 24 years in Quality Control 10 years as a kiln firemen,
two years in blue etch inspection, one year as a Level I and
one year as Level II x-ray tech in various radiography, RTR
real time radiography, HECT high energy computed tomography,
RTIS real time imaging system, Linatron 6000, Rod Anode,
150kv, 320kv, 420kv x-ray machines. Five years as a Level
II Penetrant inspector using type I and type II penetrants
inspecting castings, machine castings, forgings and mixing
equipment. Ultrasonic thickness gaging, Level I Eddy
Current, and Quality control metal fabrications.