PCN LEVEL II – UT ( Ultrasonic Test )
3.1 PLATE & 3.2 PIPE

NDE CERTIFICATION AS PER
ASNT SNT TC-1A,1992
Certified NDT Level II
ASNT-LEVELII -Visual Testing
ASNT-LEVELII -Ultrasonic Testing
ASNT-LEVELII -Radiography Testing
ASNT-LEVELII -Magnetic particle Testing
ASNT-LEVELII -Liquid Penetrant Testing

IRATA INTERNATIONAL
Industrial Rope Access Trade Association
LEVEL l
Serial No:72877

CSWIP3.1
Certified Welding Inspector
Certification No- 37822
Valid up to Jan – 2014

B .Sc - Bachelor of science in Mathematics

 Company Name : SGS INSPECTION SERVICES,
Saudi Arabia Ltd,
Saudi Arabia.

Designation : NDT Technician / Welding Inspector

Period : 22nd Oct 2007 -10th Oct 2010
Professional Experience Summary
Below are the names of the clients I have worked with and the designation I held


MISA ( Vessel Manufacturing company )
UT / RT / VT Technician

GHI ( Vessel Manufacturing company )
UT / RT / VT Technician

AL ZAMIL(Vessel Manufacturing company –Jeddah)
UT / RT / VT Technician

SHARQ PLANT ( Oil plant )
UT / X- RAY/ Welding Inspector

SAUDI KAYAN ( Petrochemical Plant )
UT / RT / MPI Technician

SAIPEM PIPE LINE ( UBTG4 )
UT / MPI / PT Technician

SAIPEM ( Dammam Fab shop )
UT / MPI / PT Technician

CAT ( Yanbu ship yard )
X –Ray crawler technician

MSTC (Pipe line / cement factory / Fab shop )
UT / RT Technician

MMG STEEL FACTORY (Dammam)
UT Technician

MMG OFFSHORE (Thanajib)
UT / RT Technician

ESACO ( Well Re-fabrication jobs)
UT / RT Technician

JGP GAS PLANT (Rastaunurah )
UT / MPI Technician

AL SADIQ ( JGP job-Fab shop )
UT / RT Technician

NATIONAL PIPE COMPANY ( NPC )
UT / Welding Inspector

WIPS (Aindar)-MMG(ARAMCO CONTRACT)
RT / MPI / PT Technician

WIPS (Udhmaniyah)-MMG(ARAMCO CONTRACT)
RT / MPI / PT Technician

AL-QAHTHANI ( Double Joint)
RT (X- RAY) Technician

AFI (Silo Fabrication),
RT( X RAY ) / PT / Visual Inspector

APCO (Double Joint )
RT(X-RAY) Technician

RABIGH(Petrochemical plant
UT/RT Technician

AME ( Aramco Job)
RT/MPI Technician

MHS (Abqaiq)
UT/RT Technician

AL HAMMAM ( Fab Shop)
RT / MPI / PT Technician

MITSHUBISHI HEAVY INDUSTRIES(MHI)
Welding Inspector







 Company Name : Industrial Inspection Services,
Andhra Pradesh,
India.

Designation : UT Technician /QC Inspector (welding)

Period : 10th July 2003 to 21st June 2007


Below are the names of the clients I have worked with and the designation I held.


HPCL (Visakhapatnam )
UT Technician / QC(welding)

SBC (Visakhapatnam )
UT / RT Technician /QC (welding)

SREE AMMAL INDUSTRIES(Wind nozzle job)-vellour
UT Technician

KOODANKULAM POWER PLANT(Koodankulam)
UT Technician

 Company Name :SI IND SERVICES,
Industrial Inspection Services,
Tamil Nadu,
India.

Designation :UT Technician / RTFI

Period : 27th June 2007 to 3rd Oct 2007


Below are the names of the clients I have worked with and the designation I


ISRO (Indian Space Reasearch Organisation-Mahendragiri)
UT / RTFI

L&T (karaikkal)
UT / RTFI


EQUIPMENT HANDLED
Ultrasonic Testing : Ex 10, PX 20, USM25,
USM35X ,Krautkramer,
Modsonic Einstein II DGS, Panamatrics.
Ultrasonic Thickness Gauge : CYGNUS 4, ETM 2, DL 4
Radiographic Testing : Andrex 200Kv, Baulto 200kv
Magnetic Particle Testing : Magnaport, Magna flux, AC & DC Yoke.
Liquid Penetrant Testing : Visible solvent removable method,
Fluorescent method.
Hardness Testing : MIC 10

NDT EXPERIENCE
 Carried out UT Weld scanning of Pipelines, Buoy, Column and Beam.
 UT grid scanning & Pit mapping of Storage Tank.
 Carried out Structural & Tubular T, K, Y weld joints.
 Corrosion survey of in service components, Vessels and sphere, chemical storage Tanks.
 Performed UT on Weldments and raw materials for lamination check on all vessels, Boiler drums and build up welds for storage tanks.
 Carried out UT & RT on Weldments for Hanger Rod, Tie Rod & Structural Beam.
 Carried out Ultrasonic Thickness Gauge on Weldments and Vessels for Tubes, Pipes and Storage Tank.
 Performed UFDT on weldments for all pipe weld joints.
 Performing Hardness Testing of Pipe weld joints.
 Witnessing / performing weld visual inspection and dimensional inspection of finished welds and semi finished welds,
 LPT hands on experience and testing/witnessing on weld seams. Interpretation and evaluation ,reported and submission for approval.
 MPI of fillet welds hands on experience and testing /witnessing on weld seams,
 Performed Radiographic Testing and MPI on Weldments for
Spud Assembly & Floating Tank
 Performed RT and MPI on Weldments for Power Plant Support Column and Welder’s Performance Test Coupon Pipe.
 Carried out RT on Weldments for Errection Power Plant , Pipes &Tubes
 Performed RT and LPI on Weldments for Wind Mill Tower Shell Butt joints & Flange Joints
 Performed RT on weldments on Heat exchanger, Boiler drums, Chemical Storage tanks, vessels and sphere, Economizer Coil etc.
 Performed MT, PT work on Wind Mill Towers and Valve Bodies, Water Wall Panels

 Prepared Reports like UT,RT, MPT, LPT and VT.

 Well Versed in Radiographic Film Interpretation according to the Conversant Codes and Standard
 Approved by NDT Technician licensing and a Radiation Protection Safety Supervisor from Saudi Aramco.
WELDING INSPECTOR EXPERIENCE

• Raw material Inspection ,Monitoring of electrodes handling & storage, Monitoring welding parameters, Monitoring preheat and Inter pass Temperature and set up of all activities.
• Confirm the material against the Material Test Certificates (MTC’S).
• Calibration of welding Equipments and accessories, Electrode Qualification test, welder performance qualification test as per WPS
Issued and procedure for qualification of welders and welding.
• Checking the weld setup, Final welding visual inspection,Marking,
approval and reporting .Review and approve of WPS and PQR.
• Monitoring welding and coating activities and per project specification and procedure.
• Inspection for consumable electrode such as composition ,Type, grade and baking as per WPS.
• Inspection for finished word item including with joint fit-up different fittings and welding Inspection of spools fabrication, spool erection ,pipe alignment, supporting and hydro testing.
• Undertaking line checking through isometric drawing, P & ID , structural drawing, equipment and alignment drawings, estimation of quality of electrode and materials to be used for fabrication and construction.
• Preparation of day -today activities ,progress monitoring and reporting, monitoring the welder’s performance through repairs and controlling.
• Visual inspection of finished welds and offering for QC,TPI For inspection and approval .
• Witness of hydro test and training the welder for the test.
• Witness of welder qualification test and training the welder for the test.
• Preparation and witnessing of welder procedure qualification record, welding procedure specification and welder qualification test.
• Preparation /monitoring of QA/QC documents such as QAP, procedures etc.
• Inspection of material, correlation of mill certification ,dimensional checks ,condition of materials, documentation and reporting of non conformity (if any) to specification.
• Inspection of welding consumables and equipments, checking of storage and backing of electrode ,verifying all welding parameters .

Performing and reporting of visual inspection and film interpretation in various projects as various codes (ANSI B31.3,ASME SEX VIII UW 51 AND UW 52 ,API 1104,)