Rafael Muro's NDT Resume
NDT.org Member Since: 2013
Added: 7/26/2013
Last Updated: 7/26/2013
Last Updated: 7/26/2013
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
IL Illinois
Country:
United States
Status:
I am willing to Travel.
I am on a job and will finish soon.
Currently working but always looking.
I need a job as soon as possible.
I prefer permanent jobs.
I am on a job and will finish soon.
Currently working but always looking.
I need a job as soon as possible.
I prefer permanent jobs.
Education
2011 Aircraft Nondestructive Inspection Technician, Class C1 (NDI) Pensacola, Florida
Certificate of Completion Aviation
2009 Aviation Structural Mechanics Common Core, Class A1 Pensacola, Florida
Certificate of Completion Aviation
2009 Advanced Composite Materials Repair Course Oceana, Virginia
Certificate of Completion Aviation
Certificate of Completion Aviation
2009 Aviation Structural Mechanics Common Core, Class A1 Pensacola, Florida
Certificate of Completion Aviation
2009 Advanced Composite Materials Repair Course Oceana, Virginia
Certificate of Completion Aviation
Experience
NONDESTRUCTIVE TECHNICIAN JUNE 2011-PRESENT
United States Marine Corps Cherry Point, NC
Performed daily, weekly, monthly process controls using Cracked Chrome Panel and Starburst PSM-5 Panel to ensure continued serviceability of Liquid Penetrant Inspection Line.
Performed Magnetic Particle System Check by utilizing a Ketos Ring.
Screened emails and inducted Maintenance Action Forms (MAF's) into NALCOMIS for cataloging inspection history performed on and off of aircraft.
Planned and carried out the process of supporting neighboring aircraft squadrons consisting of 100+ aircraft on a weekly basis.
Reported to, senior leadership and maintenance control personnel, of flaw or defects found on aircraft engine and structural components.
Supervised newly certified NDI Technicians during 90 Day Probation period to assist and acknowledge proper standardization, use, and interpretation of results achieved from inspection tools.
Ensured that work center tools were all accounted for, by maintaining an up-to-date Individual Material Readiness List (IMRL), and assuring that gear nearing, or needing, calibration was sent out in a timely manner to avoid compromising mission readiness.
Responsible for promoting a safe and clean working environment.
Worked overtime, including evenings and weekends, to respond to emergencies.
Sustained up-to-date log book of all inspections executed in every NDT process.
AVIATION WELDER MAY 2010-MAY 2011
United States Marine Corps Cherry Point, NC
Performed preventative maintenance on welding machine.
Fabricated parts with and without the use of blueprints or references.
Repaired aircraft equipment by welding with aluminum, steel, stainless steel, and inconel alloy.
AVIATION INTERMEDIATE LEVEL STRUCTURES MECHANIC OCTOBER 2009
UNITED STATES MARINE CORPS CHERRY POINT, NC
Fabricated parts, by means of bending, bonding, riveting, and cutting of metal and composite materials.
Conformed with, applicable standards and publications, to carry out repair of aircraft parts.
Repaired various aircraft parts and service equipment in timely manner. Keeping supply shelf stocked with gear ready for use.
Ordered necessary items using Individual Parts Breakdown (IPB) located in publications and NALCOMIS to streamline repair process.
Performed preventative maintenance on metal shears, brakes, presses, grinders, and welder, by oiling and cleaning machines, and adding hydraulic fluid to machine reservoirs.
Notified supervisors of faulty operations and defective materials.
United States Marine Corps Cherry Point, NC
Performed daily, weekly, monthly process controls using Cracked Chrome Panel and Starburst PSM-5 Panel to ensure continued serviceability of Liquid Penetrant Inspection Line.
Performed Magnetic Particle System Check by utilizing a Ketos Ring.
Screened emails and inducted Maintenance Action Forms (MAF's) into NALCOMIS for cataloging inspection history performed on and off of aircraft.
Planned and carried out the process of supporting neighboring aircraft squadrons consisting of 100+ aircraft on a weekly basis.
Reported to, senior leadership and maintenance control personnel, of flaw or defects found on aircraft engine and structural components.
Supervised newly certified NDI Technicians during 90 Day Probation period to assist and acknowledge proper standardization, use, and interpretation of results achieved from inspection tools.
Ensured that work center tools were all accounted for, by maintaining an up-to-date Individual Material Readiness List (IMRL), and assuring that gear nearing, or needing, calibration was sent out in a timely manner to avoid compromising mission readiness.
Responsible for promoting a safe and clean working environment.
Worked overtime, including evenings and weekends, to respond to emergencies.
Sustained up-to-date log book of all inspections executed in every NDT process.
AVIATION WELDER MAY 2010-MAY 2011
United States Marine Corps Cherry Point, NC
Performed preventative maintenance on welding machine.
Fabricated parts with and without the use of blueprints or references.
Repaired aircraft equipment by welding with aluminum, steel, stainless steel, and inconel alloy.
AVIATION INTERMEDIATE LEVEL STRUCTURES MECHANIC OCTOBER 2009
UNITED STATES MARINE CORPS CHERRY POINT, NC
Fabricated parts, by means of bending, bonding, riveting, and cutting of metal and composite materials.
Conformed with, applicable standards and publications, to carry out repair of aircraft parts.
Repaired various aircraft parts and service equipment in timely manner. Keeping supply shelf stocked with gear ready for use.
Ordered necessary items using Individual Parts Breakdown (IPB) located in publications and NALCOMIS to streamline repair process.
Performed preventative maintenance on metal shears, brakes, presses, grinders, and welder, by oiling and cleaning machines, and adding hydraulic fluid to machine reservoirs.
Notified supervisors of faulty operations and defective materials.
Comments
Non Destructive Inspection Technician with 2 years of experience. Areas of expertise include performing Pre-Operational Inspections, Standardizing of Test Equipment (Nortec-2000D+, USN-52,Sonic 1200M).Broad experience of Aircraft and Service Equipment Inspection Procedures. Have the ability to work with a team, or independently, while maintaining high levels of productivity. Proficient in NDT Processes consisting of Liquid Penetrant(PT), Magnetic Particle(UT), Eddy Current(ET), Ultrasonics(UT).
