AWS CWI/NACE CIP I/NDT Level II
NDT.org Member Since: 2014
Added: 3/19/2014
Last Updated: 3/19/2014
Last Updated: 3/19/2014
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
AL Alabama
Country:
United States
Status:
I am willing to Travel.
Currently working but always looking.
I need a job as soon as possible.
I prefer temp jobs.
Currently working but always looking.
I need a job as soon as possible.
I prefer temp jobs.
Certifications
• AWS Certified Welding Inspector No. 13031231
• NACE CIP Level I No. 30398
• Level II UT
Level II PT
• Level II VT
• Level II MT
• Level II RT
• 40 Hour Radiation Safety Certificate
• State of Louisiana Industrial Radiography Card/Instructor (Expired)
• X-MET Radiation Safety Course (Positive Material Identification)
• TWIC Card
• NACE CIP Level I No. 30398
• Level II UT
Level II PT
• Level II VT
• Level II MT
• Level II RT
• 40 Hour Radiation Safety Certificate
• State of Louisiana Industrial Radiography Card/Instructor (Expired)
• X-MET Radiation Safety Course (Positive Material Identification)
• TWIC Card
Education
High School Diploma, Jacksonville, NC
Experience
December 2013 to Present Talascend SL Technip Spoolbase
Spoolbase Material Controller-Monitor, track, & document all bare pipe shipments and receipts. Compile Welder Qualification Documentation Packages and generate Welder Certifications. Track and Monitor all equipment calibration for Spoolbase and its contractors.
Theodore, AL
October 2013 to Present Talascend SL Technip Spoolbase
Certified Welding Inspector/QC Inspector-Monitor production and repair welds on Steel Catenary Risers and Flowline piping utilizing the Vermaat Technics Data Logger system. Ensure that each weld made meets the approved project welding procedure and all project specifications by checking fitup, temperature control, and visual inspection. Perform Welder Qualification Testing on different project welding procedures.
Theodore, AL
April 2013 to October 2013 Applied Technical Services
CWI/NDT Technician-At ATS I performed various CWI QC Inspections as well as RT, PT, MT & UT inside of Alabama River Cellulose, Boise Paper, & GP Leaf River.
Mobile, AL
May 2011 to April 2013 Aker Solutions/Umbilicals
Quality Specialist-With the Umbilicals group my primary responsibity was Quality Surveillance. This included Vendor Source Inspections and Incoming Material Inspections. Along with being responsible for Quality Surveillance I was Lead QC for the Termination and FAT Departments. This was to ensure that all procedures, work instructions, & drawings for these processes were current and released as well as documenting lessons learned and nonconformances. I was a liaison for document control ensuring the data books were complete and accurate prior to release to the client for review. I performed NDE Testing and mechanical completion inspections as well to ensure all components met the documentation and drawing requirements prior to client release.
July 2010 to May 2011 Aker Solutions/Aker Drilling Risers
Quality Specialist/Assistant QC Supervisor-At Aker Drilling Risers my primary responsibility was coordinating the daily NDE and weld inspections. Not 3 months after starting I was promoted to Assistant QC Supervisor and became responsible for the daily operations of the contract QC Inspectors. I approved invoices for 3rd party NDE companies as well as approved time sheets for the contract inspectors.
Mobile, AL
Feb 2010 to July 2010 Austal USA
B Class Structural Welder/Fabricator- As a Welder/Fabricator I worked on the Littoral Combat Ship welding and fabricating the panels that would make up the structure for the ship.
Mobile, AL
Jan 2006 to Aug 2009 Capitol Ultrasonics, LLC
NDT Technician- As an NDT Technician I performed ultrasonic thickness testing, dye penetrant testing, visual testing, & radiography on pressure vessels & piping for corrosion monitoring and weld inspection . I worked inside of Exxon Mobil Chemical and Refinery & Shell Chemical in Geismar, LA
Baton Rouge, LA
May 2005 to Jan 2006 Superior Steel Inc.
CNC Operator- Worked on Angle Line which punched holes and cut Angle Iron and Flat Bar. I was responsible for daily operation of machine to support production team.
Baton Rouge, LA
Spoolbase Material Controller-Monitor, track, & document all bare pipe shipments and receipts. Compile Welder Qualification Documentation Packages and generate Welder Certifications. Track and Monitor all equipment calibration for Spoolbase and its contractors.
Theodore, AL
October 2013 to Present Talascend SL Technip Spoolbase
Certified Welding Inspector/QC Inspector-Monitor production and repair welds on Steel Catenary Risers and Flowline piping utilizing the Vermaat Technics Data Logger system. Ensure that each weld made meets the approved project welding procedure and all project specifications by checking fitup, temperature control, and visual inspection. Perform Welder Qualification Testing on different project welding procedures.
Theodore, AL
April 2013 to October 2013 Applied Technical Services
CWI/NDT Technician-At ATS I performed various CWI QC Inspections as well as RT, PT, MT & UT inside of Alabama River Cellulose, Boise Paper, & GP Leaf River.
Mobile, AL
May 2011 to April 2013 Aker Solutions/Umbilicals
Quality Specialist-With the Umbilicals group my primary responsibity was Quality Surveillance. This included Vendor Source Inspections and Incoming Material Inspections. Along with being responsible for Quality Surveillance I was Lead QC for the Termination and FAT Departments. This was to ensure that all procedures, work instructions, & drawings for these processes were current and released as well as documenting lessons learned and nonconformances. I was a liaison for document control ensuring the data books were complete and accurate prior to release to the client for review. I performed NDE Testing and mechanical completion inspections as well to ensure all components met the documentation and drawing requirements prior to client release.
July 2010 to May 2011 Aker Solutions/Aker Drilling Risers
Quality Specialist/Assistant QC Supervisor-At Aker Drilling Risers my primary responsibility was coordinating the daily NDE and weld inspections. Not 3 months after starting I was promoted to Assistant QC Supervisor and became responsible for the daily operations of the contract QC Inspectors. I approved invoices for 3rd party NDE companies as well as approved time sheets for the contract inspectors.
Mobile, AL
Feb 2010 to July 2010 Austal USA
B Class Structural Welder/Fabricator- As a Welder/Fabricator I worked on the Littoral Combat Ship welding and fabricating the panels that would make up the structure for the ship.
Mobile, AL
Jan 2006 to Aug 2009 Capitol Ultrasonics, LLC
NDT Technician- As an NDT Technician I performed ultrasonic thickness testing, dye penetrant testing, visual testing, & radiography on pressure vessels & piping for corrosion monitoring and weld inspection . I worked inside of Exxon Mobil Chemical and Refinery & Shell Chemical in Geismar, LA
Baton Rouge, LA
May 2005 to Jan 2006 Superior Steel Inc.
CNC Operator- Worked on Angle Line which punched holes and cut Angle Iron and Flat Bar. I was responsible for daily operation of machine to support production team.
Baton Rouge, LA
