CWI, ICBO, ASNT Level II
NDT.org Member Since: 2002
Added: 8/28/2002
Last Updated: 8/28/2002
Last Updated: 8/28/2002
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
AZ Arizona
Country:
United States
Status:
I am willing to Travel.
Currently working but always looking.
I am willing to work overseas.
I prefer permanent jobs.
Currently working but always looking.
I am willing to work overseas.
I prefer permanent jobs.
Certifications
AWS Certified Welding Inspector # 01041371
I.C.B.O. Special Inspector-Fire Proofing
Kinetics Visual Testing Level II
Western Technologies Level II for MT, PT, UT and RT
AMI Orbital Welding Course
George Fischer Installer Level I
George Fischer Weld Inspection Level II
ASME B31.3, B31.1, BPV Section I, II, V, VIII and IX Training
I.C.B.O. Special Inspector-Fire Proofing
Kinetics Visual Testing Level II
Western Technologies Level II for MT, PT, UT and RT
AMI Orbital Welding Course
George Fischer Installer Level I
George Fischer Weld Inspection Level II
ASME B31.3, B31.1, BPV Section I, II, V, VIII and IX Training
Education
Spartan School of Aeronautics 1992 AAS in Quality Control,
and Non-Destructive Testing.
National Board Inspection Code Training
Hazardous Materials and HAZCOM Training
Southwest Safety Training Course
and Non-Destructive Testing.
National Board Inspection Code Training
Hazardous Materials and HAZCOM Training
Southwest Safety Training Course
Experience
Kinetic Systems Inc.
Phoenix, AZ October 2000 to Present
WELDER QUALIFICATION SUPERVISOR. Certified Welding Inspector Lic. # 01041371, ASNT Level II Visual Inspector. Responsible for the Kinetics Southwest Region Welder Qualification Program. Responsible for, in accordance to ASME IX, Creating all necessary documents, Proctoring welder performance tests, Visually and mechanically evaluating welder coupons, and maintaining a database of welder performance qualification records. Perform in house visual inspection on pre-fab piping in accordance to ASME B31.1 & B31.3.
WESTERN TECHNOLOGIES
Phoenix, AZ December 1998 to October 2000
N.D.T. TECH. Level II RT, UT, MT & PT. ICBO Certified Special Inspector for Spray Applied Fireproofing. Performed materials evaluation to AWS D1.1, 1.3, 1.4, 1.6, API 1104 & 650, AWWA D100 & ASME B31.1 & 31.3. Utilizing Radiographic, Ultrasonic (Shear Wave & Strait Beam), Magnetic Particle and Liquid Penetrant. Tensile testing on rebar & coupon straps. Welder Qualification to AWS & ASME IX.
PRATT & WHITNEY, PSD
Springdale, AR April 1995 to February 1996
REPAIR STATION INSPECTOR. Level II RT & PT. Performed receiving, in-line and final inspection of jet engine components utilizing visual, dimensional, Fluorescent Penetrant & Radiographic Inspection. Report preparation in compliance with FAA regulations.
SUPERIOR INDUSTRIES
Fayetteville, AR May 1994 to April 1995
PROCESS CONTROL TECHNICIAN. Performed dimensional, cosmetic, functional, and analytical tests at several points in the manufacturing process to monitor and establish controls. Set up and operation of computerized and conventional inspection equipment to assure compliance to customer and company specifications.
CENTURY INSPECTIONS
BAKERSFIELD, CA March 1992 to February 1994
NDT TECH. Level I RT, UT, MT & PT. Performed materials evaluation, weld quality reporting. Extensive experience in a variety of radiographic shots, i.e. panoramic, contact, elliptical & enlargements.
Phoenix, AZ October 2000 to Present
WELDER QUALIFICATION SUPERVISOR. Certified Welding Inspector Lic. # 01041371, ASNT Level II Visual Inspector. Responsible for the Kinetics Southwest Region Welder Qualification Program. Responsible for, in accordance to ASME IX, Creating all necessary documents, Proctoring welder performance tests, Visually and mechanically evaluating welder coupons, and maintaining a database of welder performance qualification records. Perform in house visual inspection on pre-fab piping in accordance to ASME B31.1 & B31.3.
WESTERN TECHNOLOGIES
Phoenix, AZ December 1998 to October 2000
N.D.T. TECH. Level II RT, UT, MT & PT. ICBO Certified Special Inspector for Spray Applied Fireproofing. Performed materials evaluation to AWS D1.1, 1.3, 1.4, 1.6, API 1104 & 650, AWWA D100 & ASME B31.1 & 31.3. Utilizing Radiographic, Ultrasonic (Shear Wave & Strait Beam), Magnetic Particle and Liquid Penetrant. Tensile testing on rebar & coupon straps. Welder Qualification to AWS & ASME IX.
PRATT & WHITNEY, PSD
Springdale, AR April 1995 to February 1996
REPAIR STATION INSPECTOR. Level II RT & PT. Performed receiving, in-line and final inspection of jet engine components utilizing visual, dimensional, Fluorescent Penetrant & Radiographic Inspection. Report preparation in compliance with FAA regulations.
SUPERIOR INDUSTRIES
Fayetteville, AR May 1994 to April 1995
PROCESS CONTROL TECHNICIAN. Performed dimensional, cosmetic, functional, and analytical tests at several points in the manufacturing process to monitor and establish controls. Set up and operation of computerized and conventional inspection equipment to assure compliance to customer and company specifications.
CENTURY INSPECTIONS
BAKERSFIELD, CA March 1992 to February 1994
NDT TECH. Level I RT, UT, MT & PT. Performed materials evaluation, weld quality reporting. Extensive experience in a variety of radiographic shots, i.e. panoramic, contact, elliptical & enlargements.
Comments
Member of the American Welding Society.
Member of the American Society of Non-Destructive Testing.
I have over 11 years of QA/QC Inspection and NDE experience. I am extremely well versed in piping and structural fabrication and inspection technique. I initially entered the quality assurance arena in 1990, which was the start of of my formal training and education, at Spartan School of Aeronautics. I graduated with an Associate of Applied Science degree as a Quality Control Technician with an overall GPA of 3.53. Over the course of his career, I have accumulated thousands of hours of training and many certifications in a wide variety of inspection environments. I have performed inspections utilizing various NDE methods at semiconductor facilities around the Phoenix, AZ area. I am currently in charge of the QA responsibilities at the fabrication shop where I am currently employed, which produces piping fabrications for semiconductor facilities throughout the southwest. I am highly trained in the organization and management of construction information to insure that all required documentation has been compiled, archived, and properly cross-referenced.
As a Quality Control Representative, I am responsible for the review and implementation of Quality Control procedures for the fabrication, installation, examination and testing requirements within the semi-conductor industry as well as other industries. I am familiar with various ASME and AWS codes and how they apply to the various tasks being performed.
Skills/ My special skills and certifications include: I.C.B.O. Special Inspector for Spray Applied Fire Proofing, AWS Certified Welding Inspector Lic. # 01041371. Visual Inspection Level II, Magnetic Particle Inspection Level II, Liquid Penetrant Level II, Ultrasonic Flaw Detection Level II (Thickness and Shearwave) and Radiographic Inspection Level II. All NDE certifications were performed in accordance with ASNT-TC-1A.
A sample list of my project experience includes:
Intel Fab22 in Chandler,AZ,
Intel Fab 12 in Chandler, AZ,
Intel Fab 23 in Colorado Springs, CO,
Motorola Mos 12 in Phoenix, AZ.
I have also been involved in many commercial and power plant contracts that required extensive use of his NDE and QA skills.
Member of the American Society of Non-Destructive Testing.
I have over 11 years of QA/QC Inspection and NDE experience. I am extremely well versed in piping and structural fabrication and inspection technique. I initially entered the quality assurance arena in 1990, which was the start of of my formal training and education, at Spartan School of Aeronautics. I graduated with an Associate of Applied Science degree as a Quality Control Technician with an overall GPA of 3.53. Over the course of his career, I have accumulated thousands of hours of training and many certifications in a wide variety of inspection environments. I have performed inspections utilizing various NDE methods at semiconductor facilities around the Phoenix, AZ area. I am currently in charge of the QA responsibilities at the fabrication shop where I am currently employed, which produces piping fabrications for semiconductor facilities throughout the southwest. I am highly trained in the organization and management of construction information to insure that all required documentation has been compiled, archived, and properly cross-referenced.
As a Quality Control Representative, I am responsible for the review and implementation of Quality Control procedures for the fabrication, installation, examination and testing requirements within the semi-conductor industry as well as other industries. I am familiar with various ASME and AWS codes and how they apply to the various tasks being performed.
Skills/ My special skills and certifications include: I.C.B.O. Special Inspector for Spray Applied Fire Proofing, AWS Certified Welding Inspector Lic. # 01041371. Visual Inspection Level II, Magnetic Particle Inspection Level II, Liquid Penetrant Level II, Ultrasonic Flaw Detection Level II (Thickness and Shearwave) and Radiographic Inspection Level II. All NDE certifications were performed in accordance with ASNT-TC-1A.
A sample list of my project experience includes:
Intel Fab22 in Chandler,AZ,
Intel Fab 12 in Chandler, AZ,
Intel Fab 23 in Colorado Springs, CO,
Motorola Mos 12 in Phoenix, AZ.
I have also been involved in many commercial and power plant contracts that required extensive use of his NDE and QA skills.
