Below certification was done at the Electric Power
Research Institute (EPRI)
• EPRI PDI-UT-3 Through Wall Sizing in Pipe Welds Ferritic
and Austenitic with IGSCC,
length sizing and detection. January 2012
• EPRI PDI-UT-1 Ferritic Pipe Welds, length sizing and
detection. January 2012
• EPRI PDI-UT-2 Austenitic Pipe Welds with IGSCC, length
sizing and detection. August 2010

Below Training was taken at Ridgewater Community
College,MN
• 96+ hr PAUT level II Training June 2012, Course: NDT2073
PDI Phased Array Ultrasonics,

Below training meets or exceeds ASNT-SNT-TC-1A, ANSI/ANST
CP-189.
• 40 hr VT level I/II 1,2&3 IWE/IWL Endorsement Training
August 2011
• 80 hr UT level II Training December 2009.

Below training meets or exceeds ASNT-SNT-TC-1A, ANSI/ANST
CP-189, NAS 410
• 20 hr MT level II Training June 2008.
• 12 hr MT level I Training June 2008.
• 24 hr PT level II Training June 2008.
• 8 hr PT level I Training June 2008.
• 40 hr UT level II Training August 2007.
• 40 hr UT level I Training August 2007.

• Ridgewater Community College, Hutchinson ,MN Phased
Array(PAUT)
• Sonic Systems International. UT, VT(1,2,3 IWE,IWL)
• System One Technical Training Center/Hudson Technical
Training Center. UT, MT, PT.
• Major Professional Studies, Winona State University,
Senior standing.
• Post Secondary Options Student: Winona State University,
‘97-‘98.
• Graduated BOLD High School, Olivia, MN, with honors 1998.

PDI-UT Lv II (Shear and Straight Beam), VT Lv II, MT LvII,
PT LvII.
Sonic Systems International
Dec.'09-Oct.'15
• ASME Section XI Exams.
• RPV and piping exams.
• PSI and ISI.
• Walk down components.
• Perform linearity’s on UT scopes.
• Calibrate for exams.
• Weld Profiling/T&C's.
• Performed shear wave exams.
• Prepared reports.
• In addition performed all tasks listed under FAC Lead UT
FAC Level II(Limited) Technician.

PAUT Specialist / Oversite
Udelhoven Oil Field Services Inc.
Nov.'14– Jan.'15
Exxon Mobil's Point Thompson Project with
WorleyParsons/Fluor.
•Worked closely with the QA/QC and Engineering work
groups.
•3rd party oversite of PAUT inspections.
•Performed engineering review for inspect-ability of field
weld configurations, due to remote work area.
•Administered PAUT practical qualification tests for PAUT
technicians to be approved to work on project.
•Inspection materials; Carbon Steel and Duplex
Steel and Super Duplex Steel
•1.25in-2.75in pipe thickness.
•6in-10in diameter.
•Dynamic work.
•Multiple work areas.
•Utilized piping ISO's.

Site Contact and Lead NDE Technician
PAUT & SWUT Lv II, VT weld Lv II, MT LvII,
PT LvII. MSHA Certification.
Phoenix National Laboratories Inc.
Dec.'12–Current.
Freeport McMoran Metcalf Expansion Project. Dec.'12-Jan
'14
Solana Generating Station Project. Feburay '13
•Extremely dynamic work locations.
•3rd party inspections.
•Trained Technicians on PAUT.
•Special Projects.
•Dynamic work.
•Multiple work areas, Fab areas and Lay down yards.
•Utilized piping ISO's.
•Worked closely with the QA/QC, Engineering and Document
Control work groups.
•Power piping inspections to ASME B31.3.
•3in-36in diameter STD pipe.
•Performed PAUT.
•Performed Visual weld exams.
•Setup and calibration.
•Manual scanning.
•Encoded scanning.
•Data Analysis.
•Encoded scanning.
•Structural inspections to AWS D1.1.
•Performed SWUT, MT, PT and Visual weld exams.

UT Level II (Shear and Straight Beam)
Anatec-LMT
Aug. ‘12-Mid Oct. ‘12 Contract
• Walk down components.
• Perform linearity’s on UT scopes.
• Calibrate for exams.
• Weld Profiling/T&C's.
• Performed shear wave exams.
• Prepared reports.

Lead UT FAC Level II (Limited) Technician
Sonic Systems International
Mar.‘09-Nov.‘09 Contract
• Prepared FAC Final Outage Reports.
• Prepared and reviewed work packages.
• Planned and delegated work.
• Briefed multiple work crews.
• Reviewed exam reports.
• Walked down components.
• Data analysis.

UT FAC Level II (Limited) Technician
ITLS
Feb. ‘09 Contract
• Preformed FAC Straight Beam Exams.
• Utilized piping iso's.
• Data Collection.
• Griding.
• Calibrations.
• Prepared reports.

UT FAC Level II (Limited) Technician
Sonic Systems International
Oct.‘08- Feb.‘09 Contract
• Preformed Straight Beam Exams.
• Utilized piping iso's.
• Data Collection.
• Griding.
• Calibrations.
• Prepared reports.

UT FAC Level II (Limited) Technician
Mar.‘08-Mid May ‘08 Contract
Hudson Global/System One,
• Preformed Straight Beam Exams.
• Utilized piping iso's.
• Data Collection.
• Griding.
• Calibrations.
• Prepared reports.

UT Level I Technician
Oct ‘07-Dec ‘07 Contract
Hudson Global,
• Assisted with weld overlay PDI shear wave exams/ T&C.
• Calibrations.
• Organization.

Highly Motivated and dependable.

PAUT AND UT Equipment Used
• USN 50R, 60SW Shear wave.
• EPOCH 4 Shear wave.
• EPOCH XT Shear wave.
• USM GO D-meter.
• Panametrics 36,37,38DL Plus D-meter.
• ES Beam Tool Phased Array set-up tool.
• GEIT Phasor-XS Phased Array.
• Omni Scan MX Phased Array.
• Omni Scan MX2 Phased Array.
• EPOCH 1000i Phased Array.

SKILLS
• Microsoft Office Suite.
• SDRC Ideas CAD Program.
• Strong work ethic.
• Dependable.
• Exceptional safety and quality awareness.
• Exceptional attention to detail.
• High mechanical aptitude.
• Adaptable to changing schedules.
• Team work.
• Willingness to travel / Valid U.S. Passport.
• Ability to follow directions and procedures.