Spartan College of Aeronautics & Technology, Tulsa, OK Grad: 08/17/16

Nondestructive Testing Technology
ASNT member
Dean's List 2015 4th Quarter
Dean's List 2016 1st Quarter
Student Council Board as Director of Committees

Educational experience in compliance with: ASNT: SNT-TC-1A, NAS410, ASME, AWS, ANSI/ASNT CP-189 Regulations AWS Weld Inspection

Radiation Safety 180 hrs
Magnetic Particle Testing 60 hrs
Radiography 180 hrs
Liquid Dye Penetrant 60 hrs
Ultrasonic Inspection 180 hrs
Eddy Current Testing 180 hrs
Introduction to Materials & Processes 60 hrs
Visual Inspection 60 hrs
Leak Testing, AWS Welding Inspection: Welding Codes & Standards 180 hrs

Eddy Current Testing: In eddy current testing, one of the things I learned how to use is the probe, and how the alternating current flows through a wire coil and generates an oscillating magnetic field. If the probe and its magnetic field are brought close to a conductive material like a metal test piece, a circular flow of electrons known as an eddy current will begin to move through the metal very easily.

Magnetic Particle Testing: In magnetic particle, one of the procedure steps I learned was to apply the dry magnetic powders in such a manner that a light, uniform, dust like coating settles on the surface of the area under inspection. The excess powder may be gently blown across the surface to aid interpretation and increase exposure of magnetic particles to any flux leakage that is present.


Welding Codes & Standards
The Welding Inspector
The Metric System, Welding Terms and Symbols
Basic Welding Metallurgy
Materials Control, Weld Joint Inspection and Temperature Control
Welding, Joining and Cutting Processes-I
Welding, Joining and Cutting Processes-II
Qualification of Welding Procedures, Welders and Welding Operation
Codes Governing Welding Inspection
Weldment Imperfections and Discontinuities
Chemical, Metallurgical and Mechanical Testing of Welds

Familiar with the following methods and instruments:

Magnetic Particle Testing
Magna-Tech Wet Horizontal-Contact and Coil
TSI Porta-Mag MP1000 (prods)
Magna Flux (yokes)

Ultrasonic Testing
Sonic-136 Staveley Instruments
Straight Beam, Angle Beam
Dac Curve, and Linearity Graph

Visual and Liquid Penetrant Testing
Visual and Fluorescent
Water Washable and Solvent Removable
Radiography Testing
Manual Film Processing
Lorad LPX 160KV 5MA
ITE 300KV 5MA
Fuji Dynamix Series 5 CRT System
GE Nova Automatic processor

Eddy Current Testing
Nortec 1000 and 2000 Digital Readout
Nortec 23ST, Olympus 500
Conductivity Curve, Crack Detection, Nonconductive Coating Using Liftoff, and Aluminum Sorting

Radiography Testing: For manual film processing, in radiography, the most essential things to have is a floating thermometer, a timer and the time-temperature chart. With my experience with developing, rinsing, fixing, washing, and drying procedures, I have learned that exposed radiographs that contain a latent image should be processed as soon as possible as they are more sensitive to energy. Film packets are only to be opened in the dark room or under safe-light conditions.

Visual and Liquid Penetrant Testing: For visual and liquid penetrant testing, I’ve learned that penetrant materials come in two basic types, which is fluorescent and visible penetrants. Fluorescent penetrant systems are more sensitive than visible penetrant systems because the eye is drawn to the glow of the fluorescing indication. However, visible penetrants do not require a darkened area and an ultraviolet light in order to make an inspection. Penetrants are then classified by the method used to remove the excess penetrant from the part. The four methods are: Method A-Water Washable, Method B- Post-Emulsifiable, Lipophilic, Method C-Solvent Removable, and Method D- Post-Emulsifiable, Hydrophilic.



Cosumnes Oak High School, Elk Grove, CA
Grad: 2013
Diploma

Sky Zone, Tulsa, OK
06/2016 - present
Event Assistant
-Greet and help customers with their needs.
-Book and schedule parties.
-Answer and make phone calls.
-Supervise party hosts and make sure things go as planned.
-Make sure everything is in the system at time of check out.

Kay Jewelers, Tulsa, OK
10/2015 - present
Sales associate
-Greet customers and let them know about any deals going on
-Have great customer service and sell jewelry.
-Created accounts, made phone calls, and made transactions.

Victoria's Secret, Tulsa, OK
10/2015 - 01/2016
Sales associate/Cashier (seasonal position)
-Back stock and organize all the products in the back room.
-Re-stock all products that needs to be refilled on the sales floor.
-Measure customers and help customers check out.

Lowe's Home Improvement, Sacramento, CA
11/2014 - 08/2015
Sales associate (seasonal position)
-Stock and re-stock items that need to be filled.
-Make sure all the aisles in my department are organized.
-Made phone calls, built displays, made price tags, computer research,and helped customers find what they needed.

Home Goods, Elk Grove, CA
10/2014 - 01/2015
Sales associate/Cashier (seasonal position)
-Helped customers on the cash register with checkout, exchanges, and returns.
-Greet customers and help them with their needs.
-Build and rearrange displays while organizing products as well.

Tinman Merchandising, San Jose, CA 07/2013 - 10/2015
Sales associate
-Build and break down stands in different coliseums.
-Sell and help customers with everything that they need.
-Handle thousands of dollars and count merchandise at the end of the night.

Party Palace, Elk Grove, CA
06/2015 - 10/2015
Sales associate
-Maintain a clean check every 30 minutes.
-Answer phone calls and book parties.
-Host parties and make sure kids stay clean and safe.

Kim Hei Chinese Restaurant
05/2014 - 02/2015
Waitress/Host
-Greet customers as they walk in and walk out.
-Take customer's orders and bring them their orders.
-Give customers their checks and do transactions on register.

UC Davis, Sacramento, CA
03/2013 - 05/2014
File Clerk
-File records away in alphabetical order.
-Work on computer with word and excel if any errors on paperwork.
-Use scanners to convert forms, receipts, and reports into electronic format.

Yoshi's Japanese Restaurant, Elk Grove, CA 05/2014 - 03/2015
Waitress
-Greet customers as they walked in and left.
-Seat customers and take their order.
-Bring out orders, give customers their checks, and clean tables.

Makamae Melia O' Polynesia
01/2012 - 09/2015
Dance Instructor
-Taught different age group classes two times out of the week.
-Get students ready to perform at a recital after every session.
-Teach choreography at a good pace until students get it.