PCN Level II UT for welds in pipe, plate
Level II Phased Array
Level II UT
Level II MT
Level II VT
Level II PT
40 Hour Radiation Safety
TWIC card
30 Hour OSHA Hazard Recognition Training

• Completed Level I & II Training for Magnetic Particle Testing July 3, 2012
• Completed Level I & II Training for Liquid Penetrant Testing July 6, 2012
• Completed Level I Training for Ultrasonic Testing July 13, 2012
• Completed 40 hour Radiation Safety Training November 29, 2012
• Completed Level II Training for Ultrasonic Testing September 6, 2013
• Completed Level I & II Training for Visual Testing September 13, 2013
• Completed PCN Training in Ultrasonic inspection of welds in plate and welds in
pipe at Lavender International under Tim Armitt. March 21, 2014. PCN Certified Level II.
• Completed Level I & II Training in Phased Array inspection under Parrish Furr.
September 19, 2014
• On the job training using Creaform HandySCAN 3D laser scanner and
PipeCheck Corrosion software, June 2016

P r o f e s s i o n a l E x p e r i e n c e

Current Employer:

Company: Technology Plus Inc.
Position: Level II MT/UT/VT/PT/PAUT Technician
Contact: Zach Wuollet (612) 390-0893
Dates Worked: 02/01/2015 – Present

Duties:
Calibrating the OmniScan. Create setup files for different transducers, wedges plate thicknesses and weld sizes. Calibrate the wedge delay, sensitivity and create a TCG for each individual group to provide adequate coverage of weld volume, crown, root and heat affected zones. Scan longitudinal and circumferential welds using a Jireh STIX manual scanner. Complete data analysis either onboard the OmniScan or using OmniPC. Perform magnetic particle inspections on pipeline plate surfaces and welds. Perform liquid penetrant inspections on parts as needed by clients. Visually inspect all welds and plate prior to performing inspections.

Direct assessment of pipelines using MT, UT and VT; 
Perform existing coating assessment; 
Taking CP Readings (Soil Resistivity, Pipe to soil), soil 
samples; Corrosion and mechanical damage mapping using a digital pit gauge and Creaform HandyScan 3D laser scanner; ILI verification, SCC investigation; KAPA Calculation; Utilizing UT thickness, shear wave and Phased Array inspections for crack detection and sizing; Manage projects and handle situations directly with the client; Ensure operational safety of all job-relevant equipment; 
Ability to follow supervisory instructions with minimal guidance.

Inspection Codes Utilized: API 1104


Company: Mississippi Tank Company
Position: Level II MT/VT/PAUT Technician
Contact: Kurt Krueger (601) 264-1800
Dates Worked: 08/11/2014 – 1/15/2015

Duties:
Calibrating the OmniScan-- Create setup files for different transducers, wedges plate thicknesses and weld sizes. Calibrate the wedge delay, sensitivity and create a TCG for each individual group to provide adequate coverage of weld volume, crown, root and heat affected zones. Scan longitudinal and circumferential welds using a Jireh Navic motorized scanner. Complete data analysis either onboard the OmniScan or using OmniPC. Perform wet fluorescent magnetic particle inspections as needed.

Inspection Codes Utilized:
ASME Section VIII Division I

Company: Professional Staffing Services Inc. (at Vestas in Pueblo, CO)
Position: Level II MT/VT/UT Technician
Contact: Chris Rizzi– (719) 253-2383 (Vestas NDT Supervisor)
Dates Worked: 8/20/2013 – 8/10/2014

Duties:
Set-up and calibrate equipment (Olympus Epoch600 or 1000i), setting the system parameters such as instrument range, sensitivity, transducer angle etc. Visually examine all welds and plate. Perform Ultrasonic flaw detection and sizing utilizing shear wave. Perform inspections on a variety of welds in the manufacture of wind turbine towers. Interpret, evaluate, and document results through formal reports while adhering to codes, standards and other contractual documents.

Inspection Codes Utilized:

UT – ISO11666, ISO17640, EN23279
VT – EN970, EN 10029, EN10163, ISO5817
MT – ISO17638


Previous Employer:

Company: TEAM Industrial Services (at Nucor Steel in Memphis, TN)
Position: Assistant/Level II MT, VT & UT Testing Technician
Contact: Sheldon MacKinnon – (218) 443-1275
Dates Worked: 8/15/2012 – 8/20/2013

Duties:
Performed visual tests, dry particle/wet fluorescent magnetic particle tests as well as UT inspection on round and square steel bars. Assisted technicians in set-up and tear-down of equipment. Performed routine and preventive maintenance tasks, calibrations and maintained facility upkeep. Assisted technicians in project execution and daily tasks. Assisted with proper documentation and writing reports of all services provided.

I WILL PROVIDE ALL MY CERTIFICATIONS AND OTHER VITAL DOCUMENTS UPON REQUEST. THANK YOU.

Willing to travel in the US or abroad.