Jim Fennessy
NDT.org Member Since: 2003
Added: 2/10/2003
Last Updated: 2/10/2003
Last Updated: 2/10/2003
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
CO Colorado
Country:
United States
Status:
Certifications
QUALIFICATIONS:
Commercial Air Diver
First Aid and CPR
Forklift Operator Safety (OSHA Title 8)
Crane Rigging and Safety (API-RP-2D)
Trained in accordance with ASNT Instruction SNT-TC-1A
and Canadian Instruction CGSB 48.9712 as per I.S.O. 9000 Series to the degree of Level II in the following areas:
UT Ultrasonics (Shearwave) MT Magnetic Particle
PT Liquid Penetrant VT Visual
Underwater Inspection:
CVI Close Visual Inspection GVI General Visual Insp.
CCTV Closed-circuit Television Photography Macro and Stand-off
Commercial Air Diver
First Aid and CPR
Forklift Operator Safety (OSHA Title 8)
Crane Rigging and Safety (API-RP-2D)
Trained in accordance with ASNT Instruction SNT-TC-1A
and Canadian Instruction CGSB 48.9712 as per I.S.O. 9000 Series to the degree of Level II in the following areas:
UT Ultrasonics (Shearwave) MT Magnetic Particle
PT Liquid Penetrant VT Visual
Underwater Inspection:
CVI Close Visual Inspection GVI General Visual Insp.
CCTV Closed-circuit Television Photography Macro and Stand-off
Education
EDUCATION:
2002 - 2003 College of Oceaneering, Wilmington, CA
Commercial Air Diving, Graduated February 6th, 2003
Specialty: NDT
Dean’s List
Ranked 1st in the NDT Class
2002 Wilmington Skills Center, Wilmington, CA
Basic and Intermediate SMAW
1999 - 2002 Front Range Community College, Fort Collins, CO
General Education, Member Phi Theta Kapa
1997 - 1998 Rocky Mountain Manufacturing Academy, Auora, CO
CNC Programming, Blueprint Reading, Vertical Mill I, Conventional
Lathe 1, Geometric Dimensioning and Tolerancing, Technical Mathematics, and Metallurgy
1996 – 1997 Colorado State University,
General Education
Dean’s List
2002 - 2003 College of Oceaneering, Wilmington, CA
Commercial Air Diving, Graduated February 6th, 2003
Specialty: NDT
Dean’s List
Ranked 1st in the NDT Class
2002 Wilmington Skills Center, Wilmington, CA
Basic and Intermediate SMAW
1999 - 2002 Front Range Community College, Fort Collins, CO
General Education, Member Phi Theta Kapa
1997 - 1998 Rocky Mountain Manufacturing Academy, Auora, CO
CNC Programming, Blueprint Reading, Vertical Mill I, Conventional
Lathe 1, Geometric Dimensioning and Tolerancing, Technical Mathematics, and Metallurgy
1996 – 1997 Colorado State University,
General Education
Dean’s List
Experience
EXPERIENCE:
2000 – 2002 Plastic Art Products
Responsibilities included programming, setup and operation of A Haas VF-6 with a Fanuc Controller, an Atrump vertical machining center with a Centroid M-400 Controller. Shizoka and a Lagunamatic knee mills with Dynapath controllers, and a sharp manual mill with a Protrotrac A.G.E. 3 contoller. Creating Thermal Forming molds, and cutting dies.
1999 – 2000 Advanced Forming Technologies,
Built degaters, coiners, end effectors and one mold. Setup and ran jobs on a manual Bridgeport mill, a Hardinge tool room lathe, a Handsvelte sinker E.D.M. machine, and an Okomoto surface grinder. Mold cleaning, mold repair and interacting with engineers and supervisors on various projects.
1998 – 1999 DTM Products Inc.
Setup and operated mold making details on a manual Bridgeport Mill, engine lathe. Other responsibilities included mold cleaning, and interaction with engineers.
1997 – 1998 Woodward Governor, Fort Collins, CO
Responsibilities included operating two LeBlond Makino CNC Vertical Mills, a Matsuurra Horizontal CNC Mill, and an Okomoto Surface Grinder. The two Makinos have Fanuc controls with a two-pallet changer and a forty-tool magazine. The Matsuurra also has Fanuc controls with an eleven-pallet changer and a 132-tool magazine. Interacted within a team environment, and fulfilling the duties as the designated Cost representative for the team.
1996 – 1997 Rock N Road Cyclery, Fort Collins, CO
Built new bicycles from various manufactures, performed major and minor
repairs on bicycles, and interacting with customers on the sales floor.
James P. Fennessy Jr.
Page Two
1996 RND Machining, Longmont, CO (Part-time)
Operated CNC machines, changing offsets on CNC machines and doing finish work on semi-automatic rifles. Also operated two CNC lathes, a Mori Seiki SI-25 with a MF-T6 control panel and a Nakamura Tome Precision with a Fanuc control panel, operated a Matsura CNC mill with a Matsura control panel, and a vertical mill and an engine lathe, a programmable production horizontal band saw, a vertical band saw, and a glass bead blaster.
1996 Catamount Cycles, Fort Collins, CO (Part-time)
Machining of tubing for bicycle frames, facing and reaming the head tube and bottom bracket tube, and tapping the bottom bracket and rear derailleur hanger.
1991 Boulder Bicycles, Berthoud, CO
Maintenance of cycling equipment. Machining tubing on a Bridgeport mill, a chop saw, a pedestal grinder, a belt sander and a band saw. Also assembled bicycles.
2000 – 2002 Plastic Art Products
Responsibilities included programming, setup and operation of A Haas VF-6 with a Fanuc Controller, an Atrump vertical machining center with a Centroid M-400 Controller. Shizoka and a Lagunamatic knee mills with Dynapath controllers, and a sharp manual mill with a Protrotrac A.G.E. 3 contoller. Creating Thermal Forming molds, and cutting dies.
1999 – 2000 Advanced Forming Technologies,
Built degaters, coiners, end effectors and one mold. Setup and ran jobs on a manual Bridgeport mill, a Hardinge tool room lathe, a Handsvelte sinker E.D.M. machine, and an Okomoto surface grinder. Mold cleaning, mold repair and interacting with engineers and supervisors on various projects.
1998 – 1999 DTM Products Inc.
Setup and operated mold making details on a manual Bridgeport Mill, engine lathe. Other responsibilities included mold cleaning, and interaction with engineers.
1997 – 1998 Woodward Governor, Fort Collins, CO
Responsibilities included operating two LeBlond Makino CNC Vertical Mills, a Matsuurra Horizontal CNC Mill, and an Okomoto Surface Grinder. The two Makinos have Fanuc controls with a two-pallet changer and a forty-tool magazine. The Matsuurra also has Fanuc controls with an eleven-pallet changer and a 132-tool magazine. Interacted within a team environment, and fulfilling the duties as the designated Cost representative for the team.
1996 – 1997 Rock N Road Cyclery, Fort Collins, CO
Built new bicycles from various manufactures, performed major and minor
repairs on bicycles, and interacting with customers on the sales floor.
James P. Fennessy Jr.
Page Two
1996 RND Machining, Longmont, CO (Part-time)
Operated CNC machines, changing offsets on CNC machines and doing finish work on semi-automatic rifles. Also operated two CNC lathes, a Mori Seiki SI-25 with a MF-T6 control panel and a Nakamura Tome Precision with a Fanuc control panel, operated a Matsura CNC mill with a Matsura control panel, and a vertical mill and an engine lathe, a programmable production horizontal band saw, a vertical band saw, and a glass bead blaster.
1996 Catamount Cycles, Fort Collins, CO (Part-time)
Machining of tubing for bicycle frames, facing and reaming the head tube and bottom bracket tube, and tapping the bottom bracket and rear derailleur hanger.
1991 Boulder Bicycles, Berthoud, CO
Maintenance of cycling equipment. Machining tubing on a Bridgeport mill, a chop saw, a pedestal grinder, a belt sander and a band saw. Also assembled bicycles.
