Operations Manager/NDE Manager/Level II Inspector
NDT.org Member Since: 2018
Added: 8/14/2018
Last Updated: 8/14/2018
Last Updated: 8/14/2018
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
TX Texas
Country:
United States
Status:
I am willing to Travel.
I need a job as soon as possible.
I prefer permanent jobs.
I need a job as soon as possible.
I prefer permanent jobs.
Certifications
Level II Inspector-Magnetic Particle- MT
Level II Inspector-Liquid Penetrant- PT
Level II Inspector-Liquid Penetrant- PT
Education
Burleson High School- Diploma
Texas State Technical College- Carpentry certificate
Texas State Technical College- Carpentry certificate
Experience
•Manage the day to day operations of the shop and provide feedback and updates daily to the Vice President and President.
•Recruit, interview and hire, and train shop technicians and administrative staff. Track employee payroll and time card management
•Ensure each employee was trained and knowledgeable to perform the essential functions of their jobs within a specific training program deadline.
•Implement QIP-Quality Improvement Programs
•Implement Safety in the workplace by holding daily, weekly and monthly meetings
•Take a weekly inventory for all parts in the shop and order supplies as needed
•Interact with multiple vendors on a daily, weekly or monthly basis to purchase and order and purchase shop tools and equipment.
•Operate sit down forklift for loading and unloading of trucks
•Kept hourly log of parts for motor from the motor usage reports
•Creating and documenting new serial numbers on new parts. Remove old serial numbers off motors to track and identify specified parts and update the documented hours and repairs made to each part.
•Create repair tickets and file for all parts and put on pallets for shipping
•Assemble and disassemble straight and directional mud motors with the use of a Taylor made torque machine.
•Non-Destructive Testing- Magnetic particle inspection wet/dry methods. During NDT inspection checked for cracks and any visual damages and documented on inspection reports.
•Use of hand and impact drills, hand tools, OD/ID calipers, dial calipers, UV blacklight, AC yoke, DC coil, UV meter, Ambient light meter, micrometers, tape measure, engineer scale, profile gauges, overhead jib cranes, forklift, borescope, and gage maker
•Office administrative software experience with Microsoft Office, Word, Excel.
•Insure all NDT and QC equipment was calibrated and kept all calibrations up to date which included: AC yoke, DC coil, UV light meter, gauss meter, profile gauges, micrometers, gagemaker, dial calipers, and the Taylor torque machine.
•Interview, hire, train and educate all level I personnel to prepare for level II. Conduct employee coaching and disciplinary action up to termination as needed.
•QIP-Quality improvement program
•Clean tools and surfaces for preparation of inspection
•Conduct a series of testing per customers standard operating procedures or that of Professional NDT Services standards. This Determines whether to use MT or use dye penetrant PT
•Outside sales which included making 50 plus sales calls to generate warm leads, visiting potential new customers, scheduling appointments, evaluating job site and negotiation contracts and pricing.
•Electronic invoicing for customers and reports for inspection results
•Visual inspection using flashlight and ambient lighting.
•Dimensional inspection
•Reference manual to guide inspections using the T.H. Hill DS-1.
•Conduct safety, tailgate, and JSEA meetings
•Use of Hand tools, power tools, calipers, OD/ID: Dial calipers, XT calipers, Engineer scale, Dummy stick, Grinders 4" and 6", White light meter, UV meter, gauss meter, DC coil, AC coil, Variat coil, UV blacklight and a Yoke. Use of micrometers minimal.
•Specializing in bottom hole assemblies, drill stem inspections, drilling motors, crossovers, pup joints, MWD collars and subs, versa stim, liner hanger, mud motors, American petroleum institute-API connections, and other oilfield components.
•Recruit, interview and hire, and train shop technicians and administrative staff. Track employee payroll and time card management
•Ensure each employee was trained and knowledgeable to perform the essential functions of their jobs within a specific training program deadline.
•Implement QIP-Quality Improvement Programs
•Implement Safety in the workplace by holding daily, weekly and monthly meetings
•Take a weekly inventory for all parts in the shop and order supplies as needed
•Interact with multiple vendors on a daily, weekly or monthly basis to purchase and order and purchase shop tools and equipment.
•Operate sit down forklift for loading and unloading of trucks
•Kept hourly log of parts for motor from the motor usage reports
•Creating and documenting new serial numbers on new parts. Remove old serial numbers off motors to track and identify specified parts and update the documented hours and repairs made to each part.
•Create repair tickets and file for all parts and put on pallets for shipping
•Assemble and disassemble straight and directional mud motors with the use of a Taylor made torque machine.
•Non-Destructive Testing- Magnetic particle inspection wet/dry methods. During NDT inspection checked for cracks and any visual damages and documented on inspection reports.
•Use of hand and impact drills, hand tools, OD/ID calipers, dial calipers, UV blacklight, AC yoke, DC coil, UV meter, Ambient light meter, micrometers, tape measure, engineer scale, profile gauges, overhead jib cranes, forklift, borescope, and gage maker
•Office administrative software experience with Microsoft Office, Word, Excel.
•Insure all NDT and QC equipment was calibrated and kept all calibrations up to date which included: AC yoke, DC coil, UV light meter, gauss meter, profile gauges, micrometers, gagemaker, dial calipers, and the Taylor torque machine.
•Interview, hire, train and educate all level I personnel to prepare for level II. Conduct employee coaching and disciplinary action up to termination as needed.
•QIP-Quality improvement program
•Clean tools and surfaces for preparation of inspection
•Conduct a series of testing per customers standard operating procedures or that of Professional NDT Services standards. This Determines whether to use MT or use dye penetrant PT
•Outside sales which included making 50 plus sales calls to generate warm leads, visiting potential new customers, scheduling appointments, evaluating job site and negotiation contracts and pricing.
•Electronic invoicing for customers and reports for inspection results
•Visual inspection using flashlight and ambient lighting.
•Dimensional inspection
•Reference manual to guide inspections using the T.H. Hill DS-1.
•Conduct safety, tailgate, and JSEA meetings
•Use of Hand tools, power tools, calipers, OD/ID: Dial calipers, XT calipers, Engineer scale, Dummy stick, Grinders 4" and 6", White light meter, UV meter, gauss meter, DC coil, AC coil, Variat coil, UV blacklight and a Yoke. Use of micrometers minimal.
•Specializing in bottom hole assemblies, drill stem inspections, drilling motors, crossovers, pup joints, MWD collars and subs, versa stim, liner hanger, mud motors, American petroleum institute-API connections, and other oilfield components.
Comments
•Experienced NDE/NDT services manager with focus on Oil and Gas Barnett and Permian Basin industry. Inspecting API, down hole tools, drilling motors, casing, versastem, liner hanger, MWD drill collars, fishing tools. Torque machine experience. Inventory control.
•8 years knowledge in non-destructive testing field
•Extensive knowledge in MT and PT
•Plan, direct, coordinate and sell NDE/NDT services
•Oversee the operation of all aspects of non-destructive testing
•Evaluate inspection reports and field tickets to extract data and develop improvements
•Evaluate current operational strategies and recommend improvements
•Generate operational and financial reports for management as needed
•Assist in overseeing operational cost, risk and audit activities. Assist in purchasing and product pricing research
•Measure and report on operational performance and develop plans to improve relevant key performance indicators
•Increase company’s performance. Implement strategic decisions; demonstrate a sophisticated financial understanding
•Team player driven to add to the financial and operational success and growth of the company by collaborating with employees and all levels of management
•Microsoft office suites including: Word, Excel, and Power Point
•8 years knowledge in non-destructive testing field
•Extensive knowledge in MT and PT
•Plan, direct, coordinate and sell NDE/NDT services
•Oversee the operation of all aspects of non-destructive testing
•Evaluate inspection reports and field tickets to extract data and develop improvements
•Evaluate current operational strategies and recommend improvements
•Generate operational and financial reports for management as needed
•Assist in overseeing operational cost, risk and audit activities. Assist in purchasing and product pricing research
•Measure and report on operational performance and develop plans to improve relevant key performance indicators
•Increase company’s performance. Implement strategic decisions; demonstrate a sophisticated financial understanding
•Team player driven to add to the financial and operational success and growth of the company by collaborating with employees and all levels of management
•Microsoft office suites including: Word, Excel, and Power Point
