Boris Milkovski CV
NDT.org Member Since: 2019
Added: 8/27/2019
Last Updated: 8/27/2019
Last Updated: 8/27/2019
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
Country:
Macedonia
Status:
Certifications
Level 2 Multi-Disciplined NDT Inspector – EN 473 ISO 9712 RT-Radiography Testing, MT(MPI)-Magnetic Testing, UT-Ultrasonic Testing, PT(DPI)-Penetrant Testing, VT-Visual Testing
Welding Inspector IWI-C
LEEA (Part 1 and part 2)
MFL - Inspection of Casing & Tubing
MFL - Inspection of Drill Pipes
MFL - Inspection of Rotary Shouldered Connections on Drillstem Components
Welding Inspector IWI-C
LEEA (Part 1 and part 2)
MFL - Inspection of Casing & Tubing
MFL - Inspection of Drill Pipes
MFL - Inspection of Rotary Shouldered Connections on Drillstem Components
Education
BSc. Welding Engineer, Department: Welding and design of steel constructions, University “St. Cyril and Methodius”, Skopje
October 2005 – April 2009
Natural Science and Mathematics, High School “Aco Ruskovski” Berovo
September 2001 – June 2005
October 2005 – April 2009
Natural Science and Mathematics, High School “Aco Ruskovski” Berovo
September 2001 – June 2005
Experience
Mechanical Engeneer at JM Inzenering Macedonia
July 2016-Present
Responsible to assure compliance to the company and costumer procedures and requirement.
Plan and organize the QA/QC inspection in accordance with the Project scope of work and Technical specifications;
Attending Pre-inspection and Project inspection meeting’s with contractors for confirmation of project Quality plan and requirements;
Witnessing and approval of WPS/WPQ(PQR), WPAR(WPQR); Evaluate and approve contractors, Inspection Test Plan, Testing Procedures,
Evaluation and auditing sub-contractors for services, vendor inspection etc.;
Coordinating and witnessing of hydro tests, NDT Inspections, Welding ets.
QA/QC Consultant at Cardno PPI Quality and Asset Management
LLC, Angola, Luanda, Cobalt-Kwanza Basin Project
April 2013-February 2016
Successful inspection on Tools: torque-ups function testing, pressure testing in accordance with SOPs and ITPs for the followings:
Schlumberger-DST, Sub Sea, Chemicals, Cementing, Fishing, Surface well testing, TCP etc.
Halliburton- Cementing, Jewelry equipment, Treating iron, Slick line, Logging, Nitrogen Systems, Pumping units, Storage Tanks, ELIAS and treating iron.
FRANK’S and Weatherford- Casing handling equipment.
Baker Hughes- Line hungers ets.
Supervise the make-up and preparations of all Upper Completion tools and Lower Sand face equipment at service provider’s base, prior to load out.
Ensure relevant third party personnel follow operational procedures and have the necessary tools to perform tasks.
Communicate with Wells Engineering Manager, Completions Engineers /Supervisors and Drilling Engineers.
Proactively communicate issues such as NCR’s (non conformance reports) and FIR’S (failure investigation report) and observe trends to improve operations where necessary.
Provides QA and supervise all tubing maintenance at Shorebase and at the rig site. To provide onsite thread inspection for all premium connections ensuring that correct procedures are followed in accordance with manufacturer’s guidelines.
Performing pre-shipment inspection on CCU’S and all other lifting gear before they go offshore to make sure that everything is in according to the client procedure and standards and is safe to go offshore . Organizing and witnessing all the lifting inspections according to the client specifications and standards for all CCU’S and other lifting equipment which posses the client. Maintains of the data base for all the certificates and reports for this equipment which we receive from inspection company.
Quality inspection on drilling chemicals before they send them to the rig.
QA/QC Tubular and BHA Supervisor, Lifting Inspector, Multi-Discipline NDT Inspector, Welding inspector at APAVE on various locations Ghana, Gabon, Turkey, Equatorial Guinea-Malabo, Angola-Soyo, Macedonia.
August 2009 –April 2013
Delivery full range of testing and quality inspection services, playing key role in startup and operational compliance at onshore and offshore platforms for major energy companies at sites around the world. Drew
upon firm understanding of best practices to adapt quickly to new company cultures and make immediate contributions to quality and safety system performance. Attending all daily, weekly and monthly meetings whit client representatives. Sending reports direct to the clients. Organizing teams and equipment for all the inspection in different inspection sites.
Calibration on tools and equipment.
Performing Tubular/Rotary Inspection, Dimensional inspection on drill pipes and BHA. Performing VT, MPI on the connection and body as well as EMI and thickness measurement of pipe body for several clients such as: TULLOW, KOSMOS ENERGY, IOT, Drill Quip and WEATHERFORD
Welding and multidiscipline NDT Inspector performing various NDT tasks for ORSAM
Lifting inspections and Performing visual and MPI on offshore containers; Lifting and tubular inspections and performing visual and MPI on offshore containers as well as tubular inspection on drilling elevator and additional equipment of drill floor for several clients such as: ExXON MOBIL,FRANK INTERNATIONAL, SCHLUMBERGER, BAKER HUGHES
Multidiscipline NDT Inspector performing various NDT tasks for several clients such as Marathon Oil, Exxon, AMPCO (“Shutdown” Project), VETCO Grey, Aker Qserv, Total etc. on pressure vessels, pipes and pipelines, tubular and lifting equipment.
Performing all kinds of NDT inspections (including MT, PT and UT) on piping during the construction of the Refinery ALNG in Angola.
NDT inspection on tanks, pipes and pipeline (marine terminal, sealines), mainly with, UT, VT and MT, as well as PT method on the floor of the LNG tanks.
Senior Multi-Discipline NDT Inspector at TSG- Industry Searvice on various locations in Macedonia.
September 2008 – August 2009
Drove NDT processes for oil production and manufacturing companies across Macedonia, achived testing goals and schedules for OKTA Refinery, JUG Welding Institute, Dimce Banjarot and Feni Industry Macedonia.
July 2016-Present
Responsible to assure compliance to the company and costumer procedures and requirement.
Plan and organize the QA/QC inspection in accordance with the Project scope of work and Technical specifications;
Attending Pre-inspection and Project inspection meeting’s with contractors for confirmation of project Quality plan and requirements;
Witnessing and approval of WPS/WPQ(PQR), WPAR(WPQR); Evaluate and approve contractors, Inspection Test Plan, Testing Procedures,
Evaluation and auditing sub-contractors for services, vendor inspection etc.;
Coordinating and witnessing of hydro tests, NDT Inspections, Welding ets.
QA/QC Consultant at Cardno PPI Quality and Asset Management
LLC, Angola, Luanda, Cobalt-Kwanza Basin Project
April 2013-February 2016
Successful inspection on Tools: torque-ups function testing, pressure testing in accordance with SOPs and ITPs for the followings:
Schlumberger-DST, Sub Sea, Chemicals, Cementing, Fishing, Surface well testing, TCP etc.
Halliburton- Cementing, Jewelry equipment, Treating iron, Slick line, Logging, Nitrogen Systems, Pumping units, Storage Tanks, ELIAS and treating iron.
FRANK’S and Weatherford- Casing handling equipment.
Baker Hughes- Line hungers ets.
Supervise the make-up and preparations of all Upper Completion tools and Lower Sand face equipment at service provider’s base, prior to load out.
Ensure relevant third party personnel follow operational procedures and have the necessary tools to perform tasks.
Communicate with Wells Engineering Manager, Completions Engineers /Supervisors and Drilling Engineers.
Proactively communicate issues such as NCR’s (non conformance reports) and FIR’S (failure investigation report) and observe trends to improve operations where necessary.
Provides QA and supervise all tubing maintenance at Shorebase and at the rig site. To provide onsite thread inspection for all premium connections ensuring that correct procedures are followed in accordance with manufacturer’s guidelines.
Performing pre-shipment inspection on CCU’S and all other lifting gear before they go offshore to make sure that everything is in according to the client procedure and standards and is safe to go offshore . Organizing and witnessing all the lifting inspections according to the client specifications and standards for all CCU’S and other lifting equipment which posses the client. Maintains of the data base for all the certificates and reports for this equipment which we receive from inspection company.
Quality inspection on drilling chemicals before they send them to the rig.
QA/QC Tubular and BHA Supervisor, Lifting Inspector, Multi-Discipline NDT Inspector, Welding inspector at APAVE on various locations Ghana, Gabon, Turkey, Equatorial Guinea-Malabo, Angola-Soyo, Macedonia.
August 2009 –April 2013
Delivery full range of testing and quality inspection services, playing key role in startup and operational compliance at onshore and offshore platforms for major energy companies at sites around the world. Drew
upon firm understanding of best practices to adapt quickly to new company cultures and make immediate contributions to quality and safety system performance. Attending all daily, weekly and monthly meetings whit client representatives. Sending reports direct to the clients. Organizing teams and equipment for all the inspection in different inspection sites.
Calibration on tools and equipment.
Performing Tubular/Rotary Inspection, Dimensional inspection on drill pipes and BHA. Performing VT, MPI on the connection and body as well as EMI and thickness measurement of pipe body for several clients such as: TULLOW, KOSMOS ENERGY, IOT, Drill Quip and WEATHERFORD
Welding and multidiscipline NDT Inspector performing various NDT tasks for ORSAM
Lifting inspections and Performing visual and MPI on offshore containers; Lifting and tubular inspections and performing visual and MPI on offshore containers as well as tubular inspection on drilling elevator and additional equipment of drill floor for several clients such as: ExXON MOBIL,FRANK INTERNATIONAL, SCHLUMBERGER, BAKER HUGHES
Multidiscipline NDT Inspector performing various NDT tasks for several clients such as Marathon Oil, Exxon, AMPCO (“Shutdown” Project), VETCO Grey, Aker Qserv, Total etc. on pressure vessels, pipes and pipelines, tubular and lifting equipment.
Performing all kinds of NDT inspections (including MT, PT and UT) on piping during the construction of the Refinery ALNG in Angola.
NDT inspection on tanks, pipes and pipeline (marine terminal, sealines), mainly with, UT, VT and MT, as well as PT method on the floor of the LNG tanks.
Senior Multi-Discipline NDT Inspector at TSG- Industry Searvice on various locations in Macedonia.
September 2008 – August 2009
Drove NDT processes for oil production and manufacturing companies across Macedonia, achived testing goals and schedules for OKTA Refinery, JUG Welding Institute, Dimce Banjarot and Feni Industry Macedonia.
Comments
Eleven years of solid Oil and Gas experience in QA/QC, NDT, Tubular, Welding and Lifting experience, both offshore and onshore, in various fields of competence associated with Operations, Projects, Job documentation, QA/QC, Training, Production, Exploration, Construction & Maintenance in Oil and Gas Industries. Experience backed by through knowledge of industry codes and best practices for NDT, IWI, Tubular and Lifting inspections.
Multilingual(English, Portuguese, Spanish, Serbo-Croatian, Bulgarian and Macedonian) and adept at building strong relationships with stakeholders at any company level from office staff to executive management skilled at leading field inspections and ensuring top performance from NDT, Welding , Lifting and Tubular contract crews.
Dedicated team player. To achieve set goals, maintain safety standards, assets’, availability, reliability, integrity. Manage relationships while operating always within approved processes, policies and procedures. Organized, accountable and prove to thrive under pressure; history meeting deadlines, quality targets and client requirements on schedule consistently.
Multilingual(English, Portuguese, Spanish, Serbo-Croatian, Bulgarian and Macedonian) and adept at building strong relationships with stakeholders at any company level from office staff to executive management skilled at leading field inspections and ensuring top performance from NDT, Welding , Lifting and Tubular contract crews.
Dedicated team player. To achieve set goals, maintain safety standards, assets’, availability, reliability, integrity. Manage relationships while operating always within approved processes, policies and procedures. Organized, accountable and prove to thrive under pressure; history meeting deadlines, quality targets and client requirements on schedule consistently.
