NDE Technician/Nuclear work
NDT.org Member Since: 2003
Added: 11/21/2003
Last Updated: 11/21/2003
Last Updated: 11/21/2003
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
IL Illinois
Country:
United States
Status:
I am willing to Travel.
I need a job as soon as possible.
I prefer temp jobs.
I need a job as soon as possible.
I prefer temp jobs.
Certifications
Level II RT
Level II Film interpretation
Level II MT
Level II PT
Level II UTT
Nuclear Clearance
Level II Film interpretation
Level II MT
Level II PT
Level II UTT
Nuclear Clearance
Education
High School
Experience
NUCLEAR EXPERIENCE
Wolf Creek Nuclear Outage, 9-6-03 to 11-19-03.
Activities:
• RT inspection of piping in turbine building for Flow Accelerated Corrosion.
• RT inspection of welds in contaminated area let down heat exchanger replacement to Section III.
• RT inspection of welds in x-ray vault for let down heat exchanger replacement to Section III.
• RT inspection of valves for position in Auxiliary Building in RCA.
• RT inspection of welds for qualification of welders to Section IX, including film interpretation.
• MT inspection of crane hooks in containment.
• MT inspection of support welds in containment.
• MT inspection of reactor head nuts in contaminated area of RCA.
• MT inspection of steam generator man way studs in containment.
• MT inspection of repair welds on low pressure feed water heaters in turbine building.
• Assisted in PT inspection of reactor head cavity seal welds in highly contaminated area in containment, requiring double set of protective clothing.
Callaway Nuclear Plant Outage, 9-13-02 to 11-15-02
Activities:
• RT inspection of welds for qualification of welders to Section IX.
• UT thickness inspection of piping in turbine building for flow accelerated corrosion.
NDE Technician: RT, MT, PT, UTT, PMI July 2002 to Present
MQS Inspection, Wood River, IL - I am currently working for MQS Inspection at their Wood River, Illinois lab. Duties include inspection of welds and components using RT, MT, PT, UTT, and PMI methods. Work is done at refineries, chemical plants, power plants, and fabrication shops in Southern Illinois, Missouri, and Kansas. Received Nuclear Clearance in September 2002.
NDE Technician: MT, PT May 2002
Longview Inspection, Tuscaloosa, Alabama - Worked at International Paper in Courtland, Alabama. Duties were inspection of welds using PT and MT methods.
NDE Technician: RT, MT, PT March 2002 to May 2002
MQS Inspection, Wood River, Illinois - Duties included inspection of welds using RT, MT, and PT Methods in refineries, power plants, and fabrication shops, and film interpretation.
NDE Technician: RT, MT, PT September 2001 to November 2001
Conam Inspection, Houston, TX - Worked as night shift RT Technician at Citgo's crude unit turnaround in Pasadena, Texas. Duties included inspection of welds using RT, MT, and PT methods, processing and interpreting film.
NDE Technician: RT, MT, PT February 2002 to February 2002
Petrochem Inspection, Houston, TX - Worked at Arizona Public Service Four Corners Power Generating Station near Farmington New Mexico. Duties included RT inspection of welds to B31.1, processing and interpreting film.
NDE Technician: RT, MT, PT September 2000 to September 2001
Braun Intertec, Minneapolis, Minnesota - Worked Bendtec Inc. in Duluth, Minnesota. My position was night shift RT Technician performing inspection on heavy wall power plant piping to B 31.1. using RT, MT, and PT methods. Duties also included processing and interpreting film. RT was performed in a permanent vault.
NDE Technician: RT June 2000 to September 2000
MQS Inspection, Jacksonville, FL - Worked at Cape Canaveral Air Force Station on SLC-37B Launch Complex. This is a new launch constructed by Raytheon (Washington Group) for Boeing Aerospace for their new Delta IV Heavy lift rocket. My position was lead RT Technician. Duties were RT inspection of welds to B 31.3, processing and interpreting film, and interacting with client. Welds included both thin (schedule 10) and heavy wall up to one inch thick on sizes ranging from one inch up to twenty four inch.
NDE Technician: RT April 2000 to May 2000
Twin City Testing, St. Paul, Minnesota - Worked at Koch Petroleum's spring 2000 turnaround. Duties were RT inspection of welds, processing and interpreting film.
NDE Technician: RT, MT, PT March 2000 to April 2000
Conam Inspection, Columbus, OH - Worked at Sunoco 2000 turnaround in Oregon, Ohio. Duties included inspection of welds using RT, MT, and PT methods, processing and interpreting film.
NDE Technician: MT, PT February 2000
Anatec International, Beaumont, TX - Worked at ExxonMobile's Coker Unit turnaround performing inspection of welds using MT and PT methods.
NDE Technician: RT September 1999 to December 1999
Twin City Testing, St. Paul, Minnesota- Worked at Koch Petroleum at their fall 1999 turnaround. Duties included RT inspection of piping, processing, and interpreting film.
NDE Technician: RT, MT, PT July 1999 to September 1999
Jacobs Engineering, St. Croix, U.S. Virgin Islands - My position and duties remained the same when Jacobs took over the inspection contract at the HOVENSA Refinery.
NDE Technician: RT, MT, PT February 1999 to July 1999
Raytheon Catalytic, Inc., St. Croix, U.S. Virgin Islands - My position was lead radiographer on night shift at the HOVENSA Refinery on the island of St. Croix. Duties included inspection of piping in fabrication areas and processing units for turnarounds and maintenance and processing and interpreting film. RT included both weld quality and profiles for wall thickness.
RT Technician: RT November 1998 to January 1999
Tulsa Gamma Ray, Inc., Tulsa, OK - Worked in vessel and pipe fabrication shops in the Tulsa area performing RT inspection on Section VIII vessels and B31.3 piping. Other duties included processing and interpreting film.
NDE Technician: RT, MT, PT, PMI May 1993 to November 1998
Globe X-Ray Services, Tulsa, Oklahoma - Started at an entry level position and received Level II certifications. I worked in pressure vessel and pipe fabrication shops in the Tulsa area. Performed RT inspection to B31.1, B31.3, and Section VII. These included drums, towers, exchangers, furnaces, boilers, compressor skids, and related piping. I worked three years as night shift RT Technician at GEA Rainey Corporation inspecting box headers.
Wolf Creek Nuclear Outage, 9-6-03 to 11-19-03.
Activities:
• RT inspection of piping in turbine building for Flow Accelerated Corrosion.
• RT inspection of welds in contaminated area let down heat exchanger replacement to Section III.
• RT inspection of welds in x-ray vault for let down heat exchanger replacement to Section III.
• RT inspection of valves for position in Auxiliary Building in RCA.
• RT inspection of welds for qualification of welders to Section IX, including film interpretation.
• MT inspection of crane hooks in containment.
• MT inspection of support welds in containment.
• MT inspection of reactor head nuts in contaminated area of RCA.
• MT inspection of steam generator man way studs in containment.
• MT inspection of repair welds on low pressure feed water heaters in turbine building.
• Assisted in PT inspection of reactor head cavity seal welds in highly contaminated area in containment, requiring double set of protective clothing.
Callaway Nuclear Plant Outage, 9-13-02 to 11-15-02
Activities:
• RT inspection of welds for qualification of welders to Section IX.
• UT thickness inspection of piping in turbine building for flow accelerated corrosion.
NDE Technician: RT, MT, PT, UTT, PMI July 2002 to Present
MQS Inspection, Wood River, IL - I am currently working for MQS Inspection at their Wood River, Illinois lab. Duties include inspection of welds and components using RT, MT, PT, UTT, and PMI methods. Work is done at refineries, chemical plants, power plants, and fabrication shops in Southern Illinois, Missouri, and Kansas. Received Nuclear Clearance in September 2002.
NDE Technician: MT, PT May 2002
Longview Inspection, Tuscaloosa, Alabama - Worked at International Paper in Courtland, Alabama. Duties were inspection of welds using PT and MT methods.
NDE Technician: RT, MT, PT March 2002 to May 2002
MQS Inspection, Wood River, Illinois - Duties included inspection of welds using RT, MT, and PT Methods in refineries, power plants, and fabrication shops, and film interpretation.
NDE Technician: RT, MT, PT September 2001 to November 2001
Conam Inspection, Houston, TX - Worked as night shift RT Technician at Citgo's crude unit turnaround in Pasadena, Texas. Duties included inspection of welds using RT, MT, and PT methods, processing and interpreting film.
NDE Technician: RT, MT, PT February 2002 to February 2002
Petrochem Inspection, Houston, TX - Worked at Arizona Public Service Four Corners Power Generating Station near Farmington New Mexico. Duties included RT inspection of welds to B31.1, processing and interpreting film.
NDE Technician: RT, MT, PT September 2000 to September 2001
Braun Intertec, Minneapolis, Minnesota - Worked Bendtec Inc. in Duluth, Minnesota. My position was night shift RT Technician performing inspection on heavy wall power plant piping to B 31.1. using RT, MT, and PT methods. Duties also included processing and interpreting film. RT was performed in a permanent vault.
NDE Technician: RT June 2000 to September 2000
MQS Inspection, Jacksonville, FL - Worked at Cape Canaveral Air Force Station on SLC-37B Launch Complex. This is a new launch constructed by Raytheon (Washington Group) for Boeing Aerospace for their new Delta IV Heavy lift rocket. My position was lead RT Technician. Duties were RT inspection of welds to B 31.3, processing and interpreting film, and interacting with client. Welds included both thin (schedule 10) and heavy wall up to one inch thick on sizes ranging from one inch up to twenty four inch.
NDE Technician: RT April 2000 to May 2000
Twin City Testing, St. Paul, Minnesota - Worked at Koch Petroleum's spring 2000 turnaround. Duties were RT inspection of welds, processing and interpreting film.
NDE Technician: RT, MT, PT March 2000 to April 2000
Conam Inspection, Columbus, OH - Worked at Sunoco 2000 turnaround in Oregon, Ohio. Duties included inspection of welds using RT, MT, and PT methods, processing and interpreting film.
NDE Technician: MT, PT February 2000
Anatec International, Beaumont, TX - Worked at ExxonMobile's Coker Unit turnaround performing inspection of welds using MT and PT methods.
NDE Technician: RT September 1999 to December 1999
Twin City Testing, St. Paul, Minnesota- Worked at Koch Petroleum at their fall 1999 turnaround. Duties included RT inspection of piping, processing, and interpreting film.
NDE Technician: RT, MT, PT July 1999 to September 1999
Jacobs Engineering, St. Croix, U.S. Virgin Islands - My position and duties remained the same when Jacobs took over the inspection contract at the HOVENSA Refinery.
NDE Technician: RT, MT, PT February 1999 to July 1999
Raytheon Catalytic, Inc., St. Croix, U.S. Virgin Islands - My position was lead radiographer on night shift at the HOVENSA Refinery on the island of St. Croix. Duties included inspection of piping in fabrication areas and processing units for turnarounds and maintenance and processing and interpreting film. RT included both weld quality and profiles for wall thickness.
RT Technician: RT November 1998 to January 1999
Tulsa Gamma Ray, Inc., Tulsa, OK - Worked in vessel and pipe fabrication shops in the Tulsa area performing RT inspection on Section VIII vessels and B31.3 piping. Other duties included processing and interpreting film.
NDE Technician: RT, MT, PT, PMI May 1993 to November 1998
Globe X-Ray Services, Tulsa, Oklahoma - Started at an entry level position and received Level II certifications. I worked in pressure vessel and pipe fabrication shops in the Tulsa area. Performed RT inspection to B31.1, B31.3, and Section VII. These included drums, towers, exchangers, furnaces, boilers, compressor skids, and related piping. I worked three years as night shift RT Technician at GEA Rainey Corporation inspecting box headers.
Comments
Looking fpr nuclear work.
