AWS / CWI ....... W178.2 / CWB level 2
NDT.org Member Since: 2005
Added: 4/27/2005
Last Updated: 4/27/2005
Last Updated: 4/27/2005
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
QC Quebec
Country:
Canada
Status:
I am willing to Travel.
I am on a job and will finish soon.
I prefer permanent jobs.
I am on a job and will finish soon.
I prefer permanent jobs.
Certifications
PIERRE DOSTIE
pierredostie@hotmail.com
http://pages.videotron.com/quality
American Welding Society
- CWI (Certified Welding Inspector).
Canadian Welding Bureau.
W178.2 Level II (Certified Welding inspector).
- CSA W59 & CSA W47.1; Structural Steel.
- ASME B31.3; Chemical Plant & Petroleum Refinery Piping.
- CSA Z662; Gas & Petroleum Piping.
- ASME Sections VIII-1 and IX; Boiler and Pressure Vessel.
SNT-TC-1A
- Magnetic Particle Level II (was certified in 1999).
NDE Theoretical and Practical Courses. (No certification).
- Ultrasound level I, 1992.
- Ultrasound level II, 1993.
- Magnetic Particle level II, 1992.
- Radiography level I, 1993.
FUNCTIONAL SUMMARY
Level of expertise with measuring instruments is excellent
My background as a machinist covers that area very well (calipers, micrometers, measuring tapes, etc. and calibration of all these instruments).
Experience using Theodolite and Levels
- Verification of elevations and slopes, of 80 feet girders during trial assemblies prior to final cut.
- Verification of levels on large diameter components prior to machining.
NDE & NDE Coordination
- Visual Inspection, Dimensional Inspection, Field and Shop Surveillance.
- NDE coordination of sub-contractors.
My experience with Drawings is excellent
- Hydro-Quebec; Pylons and Sub-Stations Structures.
- Hydro-Ontario; Pylons and Sub-Station Structures.
- OPG and AECL ; ASME; Pressure Vessels, Flexible Piping, Fittings and Expansion Joints.
- CN and Boston Major Artery; Fracture Critical Structures and Bridges.
- Ultramar, Syncrude, Shell, etc.; Isometric Drawings for Piping and Expansion Joints.
- Foster Wheeler; Expansion Joints made of steel and fabrics.
Quality Assurance Specialist.
- ASME “U” Stamp Company, History Dockets, Calibration of Tools and Record Keeping, Employee Training, Field and Shop Surveillance, Preparing Welding Procedures (GTAW, GMAW, SMAW, FCAW, STT & RSW), Certifying Welders to ASME Section IX & ASME B31.3.
- Research and Development for Welding Procedures: STT, FCAW, SMAW, GTAW & RSW, in materials such as; P5A (SA-387 grade 22), P43 (INCONEL 625), P8 (Stainless Steel types 304, 308, 310, 316, 321 & 409) and P1.
- Working Codes: CSA Z662, CSA W59, CSA W47.1, CSA B51, ASME B31.1, ASME B31.3, AWS D1.1, AWS D1.5, AWS D1.5 Fracture Critical & ASME Sections I, II, III, VIII and IX.
Videoscope Inspection of Conduits and Vessels in Pharmaceutical and Industrial Fields.
pierredostie@hotmail.com
http://pages.videotron.com/quality
American Welding Society
- CWI (Certified Welding Inspector).
Canadian Welding Bureau.
W178.2 Level II (Certified Welding inspector).
- CSA W59 & CSA W47.1; Structural Steel.
- ASME B31.3; Chemical Plant & Petroleum Refinery Piping.
- CSA Z662; Gas & Petroleum Piping.
- ASME Sections VIII-1 and IX; Boiler and Pressure Vessel.
SNT-TC-1A
- Magnetic Particle Level II (was certified in 1999).
NDE Theoretical and Practical Courses. (No certification).
- Ultrasound level I, 1992.
- Ultrasound level II, 1993.
- Magnetic Particle level II, 1992.
- Radiography level I, 1993.
FUNCTIONAL SUMMARY
Level of expertise with measuring instruments is excellent
My background as a machinist covers that area very well (calipers, micrometers, measuring tapes, etc. and calibration of all these instruments).
Experience using Theodolite and Levels
- Verification of elevations and slopes, of 80 feet girders during trial assemblies prior to final cut.
- Verification of levels on large diameter components prior to machining.
NDE & NDE Coordination
- Visual Inspection, Dimensional Inspection, Field and Shop Surveillance.
- NDE coordination of sub-contractors.
My experience with Drawings is excellent
- Hydro-Quebec; Pylons and Sub-Stations Structures.
- Hydro-Ontario; Pylons and Sub-Station Structures.
- OPG and AECL ; ASME; Pressure Vessels, Flexible Piping, Fittings and Expansion Joints.
- CN and Boston Major Artery; Fracture Critical Structures and Bridges.
- Ultramar, Syncrude, Shell, etc.; Isometric Drawings for Piping and Expansion Joints.
- Foster Wheeler; Expansion Joints made of steel and fabrics.
Quality Assurance Specialist.
- ASME “U” Stamp Company, History Dockets, Calibration of Tools and Record Keeping, Employee Training, Field and Shop Surveillance, Preparing Welding Procedures (GTAW, GMAW, SMAW, FCAW, STT & RSW), Certifying Welders to ASME Section IX & ASME B31.3.
- Research and Development for Welding Procedures: STT, FCAW, SMAW, GTAW & RSW, in materials such as; P5A (SA-387 grade 22), P43 (INCONEL 625), P8 (Stainless Steel types 304, 308, 310, 316, 321 & 409) and P1.
- Working Codes: CSA Z662, CSA W59, CSA W47.1, CSA B51, ASME B31.1, ASME B31.3, AWS D1.1, AWS D1.5, AWS D1.5 Fracture Critical & ASME Sections I, II, III, VIII and IX.
Videoscope Inspection of Conduits and Vessels in Pharmaceutical and Industrial Fields.
Experience
PIERRE DOSTIE
pierredostie@hotmail.com
http://pages.videotron.com/quality
EMPLOYMENT
2003 - Present Ganotec inc. Montreal
Inspector
- Refinery & Shop: Dimensional & Visual Inspection.
- Refinery & Shop: NDE Coordination (Subcontractors).
2000 - 2003 Thorburn Equipment inc. Montreal, Pointe-Claire
Quality Assurance Specialist (ASME “U” Stamp)
- Dimensional & Visual Inspection.
- Calibration of Tools / Record Keeping.
- Documentation for History Dockets.
- Welding Supervisor.
(Welding Procedures, Welders Qualifications, ASME section IX & ASME B31.3)
1999 - 2000 ADF Heavy Industries inc. Montreal, Lachine
Inspector
- Dimensional, Visual & Magnetic Particle Inspection.
- Ultrasound Inspection, NDE Coordination.
1996 - 1999 Métal Perrault inc. Quebec, Donnacona
- Fitter
- Group Leader.
- Dimensional & Visual Inspection.
- Employee Training.
1989 - 1996 Qualimétal inc. Quebec, Charlesbourg
Inspector
- Dimensional, Visual & Magnetic Particle Inspection.
- Employee Training.
- Expediter.
- NDE Coordination (Subcontractors).
1988 -1989 Fabrication Labrie inc. Quebec, St-Romuald,
Inspector
- Dimensional, Visual Inspection.
- Driver; Road Testing New Vehicles.
1987 - 1988 Pièces D’Auto Beaulieu & Bédard inc. Quebec, Loretteville
Owner
- Invoices, Collection & Inventory Records.
- Sales Representative.
- Automotive Paint Advisor.
1984 - 1987 National Defense Research Center Quebec, Valcartier
Machinist
- Prototype Assembly.
- Milling Machine & Lathe.
ACCREDITATIONS & PROFESSIONAL TRAINING
American Welding Society (AWS)
- CWI, Certified Welding Inspector.
Canadian Welding Bureau (CWB)
W178.2, Level 2 Certified Welding Inspector, in the Following Codes.
- CSA W59 & CSA W47.1; Structural Steel.
- ASME B31.3; Chemical Plant & Petroleum Refinery Piping.
- CSA Z662; Gas & Petroleum Piping.
- ASME Sections VIII-1 and IX; Boiler and Pressure Vessel.
SNT-TC-1A
- Magnetic Particle Level 2 (was certified in 1999).
NDE Theoretical and Practical Courses. (no certification).
- Ultrasound level 1, 1992.
- Ultrasound level 2, 1993.
- Magnetic Particle level 2, 1992.
- Radiography level 1, 1993.
FUNCTIONAL SUMMARY
Level of expertise with measuring instruments is excellent
My background as a machinist covers that area very well (calipers, micrometers, measuring tapes, etc. and calibration of all these instruments).
Experience using Transit and Levels
- Verification of elevations and slopes, of 80 feet girders during trial assemblies prior to final cut.
- Verification of levels on large diameter components prior to machining.
NDE & NDE Coordination
- Visual Inspection, Dimensional Inspection, Field and Shop Surveillance.
- NDE coordination of sub-contractors.
My experience with Drawings is excellent
- Hydro-Quebec; Pylons and Sub-Stations Structures.
- Hydro-Ontario; Pylons and Sub-Station Structures.
- OPG and AECL ; ASME; Pressure Vessels, Flexible Piping, Fittings and Expansion Joints.
- CN and Boston Major Artery; Fracture Critical Structures and Bridges.
- Ultramar, Syncrude, Shell, etc.; Isometric Drawings for Piping and Expansion Joints.
- Foster Wheeler; Expansion Joints made of steel and fabrics.
Quality Assurance Specialist.
- ASME “U” Stamp Company, History Dockets, Calibration of Tools and Record Keeping, Employee Training, Field and Shop Surveillance, Researching and Preparing Welding Procedures (GTAW, GMAW, SMAW, FCAW, STT & RSW), Certifying Welders to ASME Section IX & ASME B31.3.
- Research and Development for Welding Procedures: STT, FCAW, SMAW, GTAW & RSW, in materials such as; P5A (SA-387 grade 22), P43 (INCONEL 625), P8 (Stainless Steel types 304, 308, 310, 316, 321 & 409) and P1.
Working Codes: CSA Z662, CSA W59, CSA W47.1, CSA B51, ASME B31.1, ASME B31.3, AWS D1.1, AWS D1.5, AWS D1.5 Fracture Critical & ASME Sections I, II, III, VIII and IX.
Videoscope Inspection of Conduits and Vessels in Pharmaceutical and Industrial Fields.
Languages; French & English are Spoken and Written.
PIERRE DOSTIE
pierredostie@hotmail.com
http://pages.videotron.com/quality
EMPLOIS
2003 - Présent Ganotec inc. Montréal
Inspecteur
- Raffineries et en Usine
- Inspection Dimensionnel & Visuel
- Coordination des essais non destructifs. (Sous-traitant)
2000 - 2003 Thorburn Equipment inc. Montréal, Pointe-Claire
Spécialiste Assurance Qualité
- Inspection dimensionnel & visuel
- Calibration des instruments & record des données
- Documentation des recueils des dossiers (History Dockets)
- Superviseur en soudage
(Procédures de soudage, Qualifications des soudeurs, ASME section IX & ASME B31.3)
1999 - 2000 ADF Heavy Industries inc. Montréal, Lachine
Inspecteur
- Inspection dimensionnel, visuel & particules magnétiques
- Ultrasons & coordination des essais non destructifs
1996 - 1999 Métal Perrault inc. Québec, Donnacona
Assembleur & chef de groupe
- Assembleur de structures métallique
- Inspection dimensionnel & visuel
- Formation des employés
1989 - 1996 Qualimétal inc. Québec, Charlesbourg
Inspecteur / contremaître
- Inspection dimensionnel, visuel & particules magnétiques
- Formation des employés
- Expéditeur & coordination du trafique routier
- Coordination des essais non destructifs (sous-traitants)
1988 -1989 Fabrication Labrie Inc. Québec, St-Romuald
Inspecteur
- Inspection dimensionnel & visuel
- Essais routier des véhicules
1988 - 1989 Pièces D’Auto Beaulieu & Bédard inc. Québec, Loretteville
Propriétaire
- Factures, Collection & Inventaire
- Représentant, Conseiller en peinture automobile
1984 - 1988 Centre de Recherche pour la Défense Nationale (CRDV) Québec, Valcartier
Machiniste
- Assembleur de prototypes
- Opérations sur tours & fraiseuses
ACCRÉDITATIONS
American Welding Society (AWS)
CWI (Inspecteur en soudage certifié).
Bureau Canadien de Soudage (CWB)
W178.2, inspecteur en soudage niveau 2, dans chacun des codes suivant :
- CSA W59 & CSA W47.1; Structural Steel
- ASME B31.3; Chemical Plant & Petroleum Refinery Piping.
- CSA Z662; Gas & Petroleum Piping.
- ASME Sections VIII-1 et IX; Boiler and Pressure Vessel.
SNT-TC-1A
- Particules magnétique niveau 2 (certification était valide en 1999).
END cours théorique et pratique. (pas de certification).
- Ultrasons niveau 1, 1992.
- Ultrasons niveau 2, 1993.
- Particules magnétique niveau 2, 1992.
- Radiographie niveau 1, 1993.
LANGUES
Anglais & Français / parlé et écrit
pierredostie@hotmail.com
http://pages.videotron.com/quality
EMPLOYMENT
2003 - Present Ganotec inc. Montreal
Inspector
- Refinery & Shop: Dimensional & Visual Inspection.
- Refinery & Shop: NDE Coordination (Subcontractors).
2000 - 2003 Thorburn Equipment inc. Montreal, Pointe-Claire
Quality Assurance Specialist (ASME “U” Stamp)
- Dimensional & Visual Inspection.
- Calibration of Tools / Record Keeping.
- Documentation for History Dockets.
- Welding Supervisor.
(Welding Procedures, Welders Qualifications, ASME section IX & ASME B31.3)
1999 - 2000 ADF Heavy Industries inc. Montreal, Lachine
Inspector
- Dimensional, Visual & Magnetic Particle Inspection.
- Ultrasound Inspection, NDE Coordination.
1996 - 1999 Métal Perrault inc. Quebec, Donnacona
- Fitter
- Group Leader.
- Dimensional & Visual Inspection.
- Employee Training.
1989 - 1996 Qualimétal inc. Quebec, Charlesbourg
Inspector
- Dimensional, Visual & Magnetic Particle Inspection.
- Employee Training.
- Expediter.
- NDE Coordination (Subcontractors).
1988 -1989 Fabrication Labrie inc. Quebec, St-Romuald,
Inspector
- Dimensional, Visual Inspection.
- Driver; Road Testing New Vehicles.
1987 - 1988 Pièces D’Auto Beaulieu & Bédard inc. Quebec, Loretteville
Owner
- Invoices, Collection & Inventory Records.
- Sales Representative.
- Automotive Paint Advisor.
1984 - 1987 National Defense Research Center Quebec, Valcartier
Machinist
- Prototype Assembly.
- Milling Machine & Lathe.
ACCREDITATIONS & PROFESSIONAL TRAINING
American Welding Society (AWS)
- CWI, Certified Welding Inspector.
Canadian Welding Bureau (CWB)
W178.2, Level 2 Certified Welding Inspector, in the Following Codes.
- CSA W59 & CSA W47.1; Structural Steel.
- ASME B31.3; Chemical Plant & Petroleum Refinery Piping.
- CSA Z662; Gas & Petroleum Piping.
- ASME Sections VIII-1 and IX; Boiler and Pressure Vessel.
SNT-TC-1A
- Magnetic Particle Level 2 (was certified in 1999).
NDE Theoretical and Practical Courses. (no certification).
- Ultrasound level 1, 1992.
- Ultrasound level 2, 1993.
- Magnetic Particle level 2, 1992.
- Radiography level 1, 1993.
FUNCTIONAL SUMMARY
Level of expertise with measuring instruments is excellent
My background as a machinist covers that area very well (calipers, micrometers, measuring tapes, etc. and calibration of all these instruments).
Experience using Transit and Levels
- Verification of elevations and slopes, of 80 feet girders during trial assemblies prior to final cut.
- Verification of levels on large diameter components prior to machining.
NDE & NDE Coordination
- Visual Inspection, Dimensional Inspection, Field and Shop Surveillance.
- NDE coordination of sub-contractors.
My experience with Drawings is excellent
- Hydro-Quebec; Pylons and Sub-Stations Structures.
- Hydro-Ontario; Pylons and Sub-Station Structures.
- OPG and AECL ; ASME; Pressure Vessels, Flexible Piping, Fittings and Expansion Joints.
- CN and Boston Major Artery; Fracture Critical Structures and Bridges.
- Ultramar, Syncrude, Shell, etc.; Isometric Drawings for Piping and Expansion Joints.
- Foster Wheeler; Expansion Joints made of steel and fabrics.
Quality Assurance Specialist.
- ASME “U” Stamp Company, History Dockets, Calibration of Tools and Record Keeping, Employee Training, Field and Shop Surveillance, Researching and Preparing Welding Procedures (GTAW, GMAW, SMAW, FCAW, STT & RSW), Certifying Welders to ASME Section IX & ASME B31.3.
- Research and Development for Welding Procedures: STT, FCAW, SMAW, GTAW & RSW, in materials such as; P5A (SA-387 grade 22), P43 (INCONEL 625), P8 (Stainless Steel types 304, 308, 310, 316, 321 & 409) and P1.
Working Codes: CSA Z662, CSA W59, CSA W47.1, CSA B51, ASME B31.1, ASME B31.3, AWS D1.1, AWS D1.5, AWS D1.5 Fracture Critical & ASME Sections I, II, III, VIII and IX.
Videoscope Inspection of Conduits and Vessels in Pharmaceutical and Industrial Fields.
Languages; French & English are Spoken and Written.
PIERRE DOSTIE
pierredostie@hotmail.com
http://pages.videotron.com/quality
EMPLOIS
2003 - Présent Ganotec inc. Montréal
Inspecteur
- Raffineries et en Usine
- Inspection Dimensionnel & Visuel
- Coordination des essais non destructifs. (Sous-traitant)
2000 - 2003 Thorburn Equipment inc. Montréal, Pointe-Claire
Spécialiste Assurance Qualité
- Inspection dimensionnel & visuel
- Calibration des instruments & record des données
- Documentation des recueils des dossiers (History Dockets)
- Superviseur en soudage
(Procédures de soudage, Qualifications des soudeurs, ASME section IX & ASME B31.3)
1999 - 2000 ADF Heavy Industries inc. Montréal, Lachine
Inspecteur
- Inspection dimensionnel, visuel & particules magnétiques
- Ultrasons & coordination des essais non destructifs
1996 - 1999 Métal Perrault inc. Québec, Donnacona
Assembleur & chef de groupe
- Assembleur de structures métallique
- Inspection dimensionnel & visuel
- Formation des employés
1989 - 1996 Qualimétal inc. Québec, Charlesbourg
Inspecteur / contremaître
- Inspection dimensionnel, visuel & particules magnétiques
- Formation des employés
- Expéditeur & coordination du trafique routier
- Coordination des essais non destructifs (sous-traitants)
1988 -1989 Fabrication Labrie Inc. Québec, St-Romuald
Inspecteur
- Inspection dimensionnel & visuel
- Essais routier des véhicules
1988 - 1989 Pièces D’Auto Beaulieu & Bédard inc. Québec, Loretteville
Propriétaire
- Factures, Collection & Inventaire
- Représentant, Conseiller en peinture automobile
1984 - 1988 Centre de Recherche pour la Défense Nationale (CRDV) Québec, Valcartier
Machiniste
- Assembleur de prototypes
- Opérations sur tours & fraiseuses
ACCRÉDITATIONS
American Welding Society (AWS)
CWI (Inspecteur en soudage certifié).
Bureau Canadien de Soudage (CWB)
W178.2, inspecteur en soudage niveau 2, dans chacun des codes suivant :
- CSA W59 & CSA W47.1; Structural Steel
- ASME B31.3; Chemical Plant & Petroleum Refinery Piping.
- CSA Z662; Gas & Petroleum Piping.
- ASME Sections VIII-1 et IX; Boiler and Pressure Vessel.
SNT-TC-1A
- Particules magnétique niveau 2 (certification était valide en 1999).
END cours théorique et pratique. (pas de certification).
- Ultrasons niveau 1, 1992.
- Ultrasons niveau 2, 1993.
- Particules magnétique niveau 2, 1992.
- Radiographie niveau 1, 1993.
LANGUES
Anglais & Français / parlé et écrit
