AGD Inspection Services, Inc. - TX Texas
Posted: 5/11/2020
Need UT Level II technicians experienced in performing UT Shearwave and Lamination scan for at least 3 years. ...
Acuren Inspection - TX Texas
Posted: 5/11/2020
With 90 locations throughout North America, Acuren Inspection, Inc. is the leader in Nondestructive Testing (NDT). Providing a...
Acuren Inspection - GA Georgia
Posted: 5/11/2020
With 90 locations throughout North America, Acuren Inspection, Inc. is the leader in Nondestructive Testing (NDT). Providing...
MISTRAS Group, Inc. - United States
Posted: 5/6/2020
This is a fulltime position in Cheyenne, WY. The site lead will take direction from the site Inspection Superintendent (clie...
National Inspection & Consultants, Inc. - FL Florida
Posted: 5/4/2020
NIC will be hiring a Level III who has solid experience in the aerospace industry as well as other working environments as well. Should at minimum have Level III Certifications in Radiography (digital as well as film)/source and Eddy Current. Any other certs are considered a big plus. Job will be full-time, and it will be out of the Fort Myers, FL office. Travel will be exp...
Century Inspection - OK Oklahoma
Posted: 5/4/2020
Century Inspection, Inc. is a nondestructive examination contractor, performing, in addition to our pipeline work, inspection of...
Applied Technical Services, Inc. - United States
Posted: 5/1/2020
Applied Technical Services, Inc. (ATS) is a nationally recognized engineering, testing and inspection firm with extensive capabilities in metallurgy, materials testing, chemical analysis, non-destructive testing, forensics, engineering, fire and explosion investigations, and calibration services. ATS is headquartered in Marietta, GA with over 30 branch offices and approximately 100...
Telford Aviation, Inc. - WI Wisconsin
Posted: 4/26/2020
Telford Aviation, Inc., an Equal Opportunity Employer, has an immediate opening on one of our Government Programs for a rotational position overseas. Successful candidate will: The experienced Mechanic must be capable of accomplishing the duties required of an Aircraft Mechanic. The A&P Mechanic troubleshoots, repairs and services aircraft and engine systems. Conducts diagn...
505 CWI, LLC - NM New Mexico
Posted: 4/23/2020
505 CWI is looking for a CWI in southbend Indiana. We do everything from cell phone towers to pipeline welding inspection. Our c...
Mistras Group - FL Florida
Posted: 4/22/2020
Our Tampa, FL location is hiring Level II UT Phased Array Technicians on a full-time basis for local work. MAJOR RESPONSIBILI...
- NY New York
Posted: 4/21/2020
NDT Level II Certification for upstate New York RT II state carded a must with MT ,PT UTT Technical background in NDT methods...
Testing Technologies - VA Virginia
Posted: 4/20/2020
Testing Technologies, Inc. is seeking radiographers for full time, permanent positions in the DC/MD/VA region. Level II radiographer must hold IRRSP certification. Must pass drug test/background/driver license screenings. Please send resume with verifiable experience to: judy@testingtechnologiesinc.com Benefits include holiday, vacation, health insurance, 401K US based appl...
National Inspection & Consultants, Inc. - IN Indiana
Posted: 4/17/2020
Need asap, Level II Ultrasonic Shearwave Techs, strongly prefer Tech Pub 271 experience. Could be 6 months, or munch longer; ...
Certified Testing Laboratories, Inc. - NY New York
Posted: 4/17/2020
Seasoned UT level II Inspector Knowledge in multiple codes AWS D1.1, ASME, & etc. Computer Skills to type own reports Willing...
Applied Technical Services, Inc. - United States
Posted: 4/17/2020
Future Business Development & Project/General Management United States Applied Technical Services, Inc. (ATS) is a nationally recognized engineering, testing and inspection firm with extensive capabilities in metallurgy, materials testing, chemical analysis, non-destructive testing, forensics, engineering, fire and explosion investigations, and calibration services. ATS is he...
National Inspection & Consultants, Inc. - VA Virginia
Posted: 4/16/2020
If you are a Level II Ultrasonic Technician (Shear wave), have been laid off, looking for employment, please forward your resum...
Acuren Inspection - FL Florida
Posted: 4/14/2020
With 90 locations throughout North America, Acuren Inspection, Inc. is the leader in Nondestructive Testing (NDT). Providing a w...
Acuren Inspection - WI Wisconsin
Posted: 4/14/2020
With 90 locations throughout North America, Acuren Inspection, Inc. is the leader in Nondestructive Testing (NDT). Providing a w...
National Inspection & Consultants, Inc. - RI Rhode Island
Posted: 4/9/2020
NIC will be hiring Level II and Level III personnel for various sites. Any military or aircraft/aerospace experienced personne...
Acuren Inspection - UT Utah
Posted: 4/9/2020
Description With 90 locations throughout North America, Acuren Inspection, Inc. is the leader in Nondestructive Testing (NDT)...
Acuren Inspection - TX Texas
Posted: 4/9/2020
Description With 90 locations throughout North America, Acuren Inspection, Inc. is the leader in Nondestructive Testing (NDT)...
Mistras Group - RI Rhode Island
Posted: 4/7/2020
The Level II NDT Technician is responsible for the NDT operations for which qualified and assigned and should be capable of inte...
MISTRAS Group, Inc. - Bartlesville, OK - US
Posted: 6/18/2020
... API 510, 570 and 653 Standards Experience with Refinery or Plant Inspection, or NDT experience a plus Understanding of technical documentation such as equipment design documents, P&IDs, and ...
Honeywell - Torrance, CA - US
Posted: 7/3/2020
Operating various inspection equipment such as CMM, comparator, vision systems, hand tools, gages ... ISO-1000; IPC-600 and/or IPC-610; NDT or equivalent certification). In absence of current ...
PG&E Corporation - Stockton, CA - US
Posted: 5/27/2020
... or Contractor installed facilities limited to plastic distribution systems and smaller underground ... Completes all documentation for associated inspection work. * Maintains public and employee safety ...
The Robert B. Balter Company - Owings Mills, MD - US
Posted: 6/24/2020
Other ASNT NDT Level III certifications a plus AWS Certified Welding Inspector (AWS-CWI) or ICC Certification as Structural Inspector (ICC-SWI) required Working knowledge of applicable codes ...
CEL, an Atlas Company - San Ramon, CA - US
Posted: 6/19/2020
We have immediate openings for AWS CWI / NDT Inspectors . The successful Inspectors will work year ... Must have an AWS or CWI certification plus an UT (Ultrasonic testing) certification * Construction ...
Acara Solutions - Sacramento, CA - US
Posted: 5/27/2020
Follows general inspection guidelines to conduct routine visual CWI, dimensional, and mechanical ... Utilizes one or more non-destructive testing techniques to verify acceptability of welded and ...
Doherty Career Solutions - Columbia Heights, MN - US
Posted: 6/17/2020
Documents and dates results. Accurately documents non-destructive testing (NDT) methods, processes or results. Reads blueprints and other work orders to perform job. Quality Assurance Inspector ...
Krazan & Associates, Inc. - Lynnwood, WA - US
Posted: 7/2/2020
WABO Certifications a PLUS CWI - construction a PLUS NDT Level II Ultrasonic Testing (UT) a PLUS ... and/or move 75 lbs. You will be expected to work safely during all phases of performing the job ...
Wells Fargo Bank - Minneapolis, MN - US
Posted: 7/6/2020
... Cell" or "Cellular" in the contact information of your application. At Wells Fargo, we want to ... mobile/api * Introduce enterprise testing capabilities including chaos suite of test tools ...
Safety-Kleen - Tacoma, WA - US
Posted: 6/23/2020
... inspections and certifications (scaffolding, cleaning, repairing, etc.) Work with the facility ... Midstream or Processing Plant experience will also be considered. Working knowledge of ASME ...
MEHC - Beatrice, NE - US
Posted: 6/17/2020
... in API 1104 and ASME standards to weld on natural gas pipelines. Structural welders must be ... Install and inspect pipeline markers. Operate work equipment including but not limited to power ...
Chenoa Information Services - Newark, NJ - US
Posted: 6/12/2020
Responsible for maintaining the high level of software through code inspection, process refinement ... REST API development and integration Candidates interested in this position, please click on the ...
TOSOH SMD INC - Grove City, OH - US
Posted: 6/9/2020
Setup manual or CNC machines on proven programs. * Setup and operate all related equipment in the ... Inspect parts to print and special instructions. * Ability to work independently. Set up, operate ...
TALENT Software Services - Beaverton, OR - US
Posted: 5/18/2020
Facilitates code inspections and design reviews. Mentors others on software development practice ... Participates in establishing large and/or complex project goals, milestones and timetables
PEAK Technical Staffing USA - Los Angeles, CA - US
Posted: 6/17/2020
CNC machining and development of forgings and inspection criteria. * Lead new reverse engineering ... Bachelor of Science in Engineering or equivalent technical degree * Familiar with ANSI Y14.5 & ASME ...
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9