Zetec Webinar Phased Array Ultrasonic Inspection
Click to see Submenus
Galaxy Stationery UV Inspection Light in Compliance with ASTM E3022 and RRES 90061
Company: Labino AB
Contact: Marios Athanasiadis
Address1: Fagelsangsvagen 16
City: Vallentuna 18642
Country: Sweden
Phone: +46 8 83 90 70
The Labino Overhead Inspection System Galaxy, based on LED technology, is more compact and weighs less than many comparable products on the market today. Each Galaxy unit weighs just 2.2 kilos (4.85 lbs)! Galaxy is also compact in size with 20 cm (7.87 inches) long, 15 cm (5.9 inches) wide and 4.1 cm (1.6 inches) high. It is designed for use on specialized benches for conducting FPI and MPI Inspections on metallic parts of all shapes and sizes. The light weight and compact size makes it is easy for the user of the bench to operate and move around the inspected area, if necessary.

This product is available with our eight distributors located in the US and with 80 more distributors worldwide. Select models comply with E3022 and RRES 90061 of Rolls-Royce.

The distinctive feature of this system is its modular design. Users whose inspection tasks require coverage of large areas can use this modular system to design their own covered areas. A user can expand the covered area by connecting together any number of Galaxy units required, either from the long or the short side. The Labino Galaxy is available as a Midlight and a Floodlight. Each Galaxy unit consists of 12 UV LEDs with each LED having an estimated life of 30 000 hours. This bench light is also equipped with a white light LED for after inspection.

- At full capacity Labino Galaxy generates an intensity greater than 7 000 mW/cm2 for the midlight and greater than 5 000 mW/cm2 for the floodlight, at 38 cm (15 "). It is filtered to emit almost no visible light. The RRES 90061 Compliant version generates 4 500 mW/cm2.

- Full power is achieved instantly with the start button.

- The Galaxy is 100% free from UV-B. It is compliant with ASTM UV-A intensity and wavelength specifications for FPI and MPI. IP65 approved for dust and water jet.
SPECIAL FEATURES: 1. Dimmer - The UV light can be dimmed down up to 20% of its full capacity. The operator can set the intensity to 5 steps of his or her choice. Midlight: 7,000 < 6,000 <4,500 < 3,000 < 1,500 mW/cm2 Floodlight: 5,000 < 4,000 < 3,000 < 2,000 < 1,000 mW/cm2 2. Timer - Avoid unnecessary burning time of the LEDs through a timer. Set the duration of your working session for: 0.5 hours, 1.0 hours, 2.0 hours, 4.0 hours, 8.0 hours. 3. Cooling System - The heat generated from the LEDs is managed via a mechanical cooling system, no fans are necessary! 4. Remote Control - The on/off, the dimmer, the white light and the timer operate remotely within a range of six meters. 5. Modular Design - Able to connect as many units together as required to cover your area under inspection.
Labino AB (www.labino.com) is a Swedish-American, family owned company dedicated to the development and manufacture of UV inspection lamps since 1994. Since its inception, Labino AB has been committed to high standards of quality in the design and manufacture of new innovative products, helping NDT professionals worldwide to make the world a safer place. Labino has a wide portfolio of stationery, handheld, headlight UV products that are in compliance with ASTM E-3022, E-1417, E1444, E2297 as well as with ISO 3059. Labino also has available customized products that comply with engineering specifications of renowned manufacturers (PRIMES) such as Rolls Royce i.e. RRES 90061, Boeing, Pratt & Whitney etc. For a live demonstration of our products and more information of our compliance with the various standards please contact one of our distributors at www.labino.com/distributors.